We explore in this chapter questions of existence and uniqueness for solutions to stochastic differential equations and offer a study of their properties. This endeavor is really a study of diffusion processes. Loosely speaking, the term diffusion is attributed to a Markov process which has continuous sample paths and can be characterized in terms of its infinitesimal generator.

Stochastic Differential Equations

As companies strive to develop artefacts intended for services instead of traditional sell-off, new challenges in the product development process arise to promote continuous improvement and increasing market profits. This creates a focus on product life-cycle components as companies then make life-cycle commitments, where they are responsible for the function availability during the extent of the life-cycle, i.e. functional products. One of these life-cycle components is manufacturing; therefore, companies search for new approaches of success during manufacturability evaluation already in engineering design. Efforts have been done to support early engineering design, as this phase sets constraints and opportunities for manufacturing. These efforts have turned into design for manufacturing methods and guidelines. A further step to improve the life-cycle focus during early engineering design is to reuse results and use experience from earlier projects. However, because results and experiences created during project work are often not documented for reuse, only remembered by some people, there is a need for design support. Knowledge engineering (KE) is a methodology for creating knowledge-based systems, e.g. systems that enable reuse of earlier results and make available both explicit and tacit corporate knowledge, enabling the automated generation and evaluation of new engineering design solutions during early product development. There are a variety of KE-approaches, such as knowledge-based engineering, case-based reasoning and programming, which have been used in research to develop design for manufacturing methods and applications. There are, however, opportunities for research where several approaches and their interdependencies, to create a transparent picture of how KE can be used to support engineering design, are investigated. The aim of the research presented in this thesis is to create new methods for design for manufacturing, by using several approaches of KE, and find the beneficial and less beneficial aspects of these methods in comparison to each other and earlier research. This thesis presents methods and applications for design for manufacturing using KE. KE has been employed in several ways, namely rule-based, rule-, programmingand finite element analysis (FEA)-based, and ruleand plan-based, which are tested and compared with each other. Results show that KE can be used to generate information about manufacturing in several ways. The rule-based way is suitable for supporting life-cycle commitments, as engineering design and manufacturing can be integrated with maintenance and performance predictions during early engineering design, though limited to the firing of production rules. The rule-, programmingand FEA-based way can be used to integrate computer-aided design tools and virtual manufacturing for non-linear stress and displacement analysis. This way may also bridge the gap between engineering designers and computational experts, even though this way requires a larger effort to program than the rule-based. The ruleand planbased way can enable design for manufacturing in two fashions – based on earlier manufacturing plans and based on rules. Because earlier manufacturing plans, together with programming algorithms, can handle knowledge that may be more intricate to capture as rules, as opposed to the time demanding routine work that is often automated by means of rules, several opportunities for designing for manufacturing exist.

Methods and Applications

We construct a stream-cipher S whose implementation is secure even if a bounded amount of arbitrary (adversarially chosen) information on the internal state ofS is leaked during computation. This captures all possible side-channel attacks on S where the amount of information leaked in a given period is bounded, but overall can be arbitrary large. The only other assumption we make on the implementation of S is that only data that is accessed during computation leaks information. The stream-cipher S generates its output in chunks K1, K2, . . . and arbitrary but bounded information leakage is modeled by allowing the adversary to adaptively chose a function fl : {0,1}* rarr {0, 1}lambda before Kl is computed, she then gets fl(taul) where taul is the internal state ofS that is accessed during the computation of Kg. One notion of security we prove for S is that Kg is indistinguishable from random when given K1,..., K1-1,f1(tau1 ),..., fl-1(taul-1) and also the complete internal state of S after Kg has been computed (i.e. S is forward-secure). The construction is based on alternating extraction (used in the intrusion-resilient secret-sharing scheme from FOCS'07). We move this concept to the computational setting by proving a lemma that states that the output of any PRG has high HILLpseudoentropy (i.e. is indistinguishable from some distribution with high min-entropy) even if arbitrary information about the seed is leaked. The amount of leakage lambda that we can tolerate in each step depends on the strength of the underlying PRG, it is at least logarithmic, but can be as large as a constant fraction of the internal state of S if the PRG is exponentially hard.

/pdf/leakage-resilient-cryptography-15i0byrphr.pdf

Leakage-Resilient Cryptography

Network management requires accurate estimates of metrics for traffic engineering (e.g., heavy hitters), anomaly detection (e.g., entropy of source addresses), and security (e.g., DDoS detection). Obtaining accurate estimates given router CPU and memory constraints is a challenging problem. Existing approaches fall in one of two undesirable extremes: (1) low fidelity general-purpose approaches such as sampling, or (2) high fidelity but complex algorithms customized to specific application-level metrics. Ideally, a solution should be both general (i.e., supports many applications) and provide accuracy comparable to custom algorithms. This paper presents UnivMon, a framework for flow monitoring which leverages recent theoretical advances and demonstrates that it is possible to achieve both generality and high accuracy. UnivMon uses an application-agnostic data plane monitoring primitive; different (and possibly unforeseen) estimation algorithms run in the control plane, and use the statistics from the data plane to compute application-level metrics. We present a proof-of-concept implementation of UnivMon using P4 and develop simple coordination techniques to provide a ``one-big-switch'' abstraction for network-wide monitoring. We evaluate the effectiveness of UnivMon using a range of trace-driven evaluations and show that it offers comparable (and sometimes better) accuracy relative to custom sketching solutions.

https://dl.acm.org/doi/pdf/10.1145/2934872.2934906

One Sketch to Rule Them All: Rethinking Network Flow Monitoring with UnivMon

Over the last decade, there has been considerable interest in designing algorithms for processing massive graphs in the data stream model. The original motivation was two-fold: a) in many applications, the dynamic graphs that arise are too large to be stored in the main memory of a single machine and b) considering graph problems yields new insights into the complexity of stream computation. However, the techniques developed in this area are now finding applications in other areas including data structures for dynamic graphs, approximation algorithms, and distributed and parallel computation. We survey the state-of-the-art results; identify general techniques; and highlight some simple algorithms that illustrate basic ideas.

/pdf/graph-stream-algorithms-a-survey-1m1oq4kh5y.pdf

Graph stream algorithms: a survey

Continual/lifelong learning from a non-stationary input data stream is a cornerstone of intelligence. Despite their phenomenal performance in a wide variety of applications, deep neural networks are prone to forgetting their previously learned information upon learning new ones. This phenomenon is called"catastrophic forgetting"and is deeply rooted in the stability-plasticity dilemma. Overcoming catastrophic forgetting in deep neural networks has become an active field of research in recent years. In particular, gradient projection-based methods have recently shown exceptional performance at overcoming catastrophic forgetting. This paper proposes two biologically-inspired mechanisms based on sparsity and heterogeneous dropout that significantly increase a continual learner's performance over a long sequence of tasks. Our proposed approach builds on the Gradient Projection Memory (GPM) framework. We leverage k-winner activations in each layer of a neural network to enforce layer-wise sparse activations for each task, together with a between-task heterogeneous dropout that encourages the network to use non-overlapping activation patterns between different tasks. In addition, we introduce two new benchmarks for continual learning under distributional shift, namely Continual Swiss Roll and ImageNet SuperDog-40. Lastly, we provide an in-depth analysis of our proposed method and demonstrate a significant performance boost on various benchmark continual learning problems.

Sparsity and Heterogeneous Dropout for Continual Learning in the Null Space of Neural Activations

We resolve the randomized one-way communication complexity of Dynamic Time Warping (DTW) distance. We show that there is an efficient one-way communication protocol using $\widetilde{O}(n/\alpha)$ bits for the problem of computing an $\alpha$-approximation for DTW between strings $x$ and $y$ of length $n$, and we prove a lower bound of $\Omega(n / \alpha)$ bits for the same problem. Our communication protocol works for strings over an arbitrary metric of polynomial size and aspect ratio, and we optimize the logarithmic factors depending on properties of the underlying metric, such as when the points are low-dimensional integer vectors equipped with various metrics or have bounded doubling dimension. We also consider linear sketches of DTW, showing that such sketches must have size $\Omega(n)$.

The One-Way Communication Complexity of Dynamic Time Warping Distance.

We study linear regression under covariate shift, where the marginal distribution over the input covariates differs in the source and the target domains, while the conditional distribution of the output given the input covariates is similar across the two domains. We investigate a transfer learning approach with pretraining on the source data and finetuning based on the target data (both conducted by online SGD) for this problem. We establish sharp instance-dependent excess risk upper and lower bounds for this approach. Our bounds suggest that for a large class of linear regression instances, transfer learning with $O(N^2)$ source data (and scarce or no target data) is as effective as supervised learning with $N$ target data. In addition, we show that finetuning, even with only a small amount of target data, could drastically reduce the amount of source data required by pretraining. Our theory sheds light on the effectiveness and limitation of pretraining as well as the benefits of finetuning for tackling covariate shift problems.

The Power and Limitation of Pretraining-Finetuning for Linear Regression under Covariate Shift

Finding the reduced-dimensional structure is critical to understanding complex networks. Existing approaches such as spectral clustering are applicable only when the full network is explicitly observed. In this paper, we focus on the online factorization and partition of implicit large-scale networks based on observations from an associated random walk. We propose an efficient and scalable nonconvex stochastic gradient algorithm. It is able to process dependent data dynamically generated by the underlying network and learn a low-dimensional representation for each vertex. By applying a diffusion approximation analysis, we show that the nonconvex stochastic algorithm achieves nearly optimal sample complexity. Once given the learned low-dimensional representations, we further apply clustering techniques to recover the network partition. We show that, when the associated Markov process is lumpable, one can recover the partition exactly with high probability. The proposed approach is experimented on Manhattan taxi data.

Dynamic Factorization and Partition of Complex Networks.

We design coresets for Ordered k-Median, a generalization of classical clustering problems such as k-Median and k-Center, that offers a more flexible data analysis, like easily combining multiple objectives (e.g., to increase fairness or for Pareto optimization). Its objective function is defined via the Ordered Weighted Averaging (OWA) paradigm of Yager (1988), where data points are weighted according to a predefined weight vector, but in order of their contribution to the objective (distance from the centers). 
A powerful data-reduction technique, called a coreset, is to summarize a point set $X$ in $\mathbb{R}^d$ into a small (weighted) point set $X'$, such that for every set of $k$ potential centers, the objective value of the coreset $X'$ approximates that of $X$ within factor $1\pm \epsilon$. When there are multiple objectives (weights), the above standard coreset might have limited usefulness, whereas in a \emph{simultaneous} coreset, which was introduced recently by Bachem and Lucic and Lattanzi (2018), the above approximation holds for all weights (in addition to all centers). Our main result is a construction of a simultaneous coreset of size $O_{\epsilon, d}(k^2 \log^2 |X|)$ for Ordered k-Median. 
To validate the efficacy of our coreset construction we ran experiments on a real geographical data set. We find that our algorithm produces a small coreset, which translates to a massive speedup of clustering computations, while maintaining high accuracy for a range of weights.

/pdf/coresets-for-ordered-weighted-clustering-23pw6qqb1x.pdf

Vladimir Braverman

Papers

Sparsity and Heterogeneous Dropout for Continual Learning in the Null Space of Neural Activations

The One-Way Communication Complexity of Dynamic Time Warping Distance.

The Power and Limitation of Pretraining-Finetuning for Linear Regression under Covariate Shift

Dynamic Factorization and Partition of Complex Networks.

Coresets for Ordered Weighted Clustering