Seamless dual brake transmission for electric vehicles: Design, control and experiment

High-resolution 3D CFD multiphase simulation of the flow and the drag torque of wet clutch discs considering free surfaces

Parameter study on the influence of a radial groove design on the drag torque of wet clutch discs in comparison with analytical models

The current design of hydro-viscous clutch(HVC) in tracked vehicle fan transmission mainly focuses on high-speed and high power. However, the fluid torque under the influence of fluid temperature can not be predicted accurately by conventional mathematical model or experimental research. In order to validate the fluid torque of HVC by taking the viscosity-temperature characteristic of fluid into account, the test rig is designed. The outlet oil temperature is measured and fitted with different rotation speed, oil film thickness, oil flow rate, and inlet oil temperature. Meanwhile, the film torque can be obtained. Based on Navier-Stokes equations and the continuity equation, the mathematical model of fluid torque is proposed in cylindrical coordinate. Iterative method is employed to solve the equations. The radial and tangential speed distribution, radial pressure distribution and theoretical flow rate are determined and analyzed. The models of equivalent radius and fluid torque of friction pairs are introduced. The experimental and theoretical results indicate that tangential speed distribution is mainly determined by the relative rotating speed between the friction plate and the separator disc. However, the radial speed distribution and pressure distribution are dominated by pressure difference at the lower rotating speed. The oil film fills the clearance and the film torque increases with increasing rotating speed. However, when the speed reaches a certain value, the centrifugal force will play an important role on the fluid distribution. The pressure is negative at the outer radius when inlet flow rate is less than theoretical flow, so the film starts to shrink which decreases the film torque sharply. The theoretical fluid torque has good agreement with the experimental data. This research proposes a new fluid torque mathematical model which may predict the film torque under the influence of temperature more accurately.

Mathematical model and experiment validation of fluid torque by shear stress under influence of fluid temperature in hydro-viscous clutch

Purpose




The purpose of this paper is to reduce the drag loss and study the effects of operating conditions and groove parameters such as flow rate and temperature of automatic transmission fluid, clearance between plates, groove depth and groove ratio on the drag torque of a wet clutch for vehicles, parametric analysis of the drag torque model of wet multi-plate friction clutch with groove consideration.




Design/methodology/approach




Both experimental and numerical research was carried out in this work. Parametric groove models, full film lubrication flow model and pressure distribution model are established to investigate the effects of the grooves on drag torque of a wet clutch. Multigrid method is used to simplify the solution.




Findings




In this paper, a drag torque model of a wet multi-plate friction clutch based on the basic theory of viscous fluid dynamics is examined through experimental and numerical methods that take grooves into account, and the change trend of drag torque with operating conditions and groove parameters is analyzed.




Originality/value




Multigrid method is used to solve the governing equations, which simplifies the solution process because of the restrictions and interpolation operations between the adjacent layers of coarser and fine grids. These works provide insight into the effect regularity of operating conditions and groove parameters on drag torque of a wet multi-plate friction clutch. Furthermore, variable test conditions and sufficient experimental data are the main functions in the experimental research.

Wei Chao

Papers

Experimental Research on Drag Torque for Single-plate Wet Clutch