A review on modification methods of adsorbents for elemental mercury from flue gas

Facile preparation of zeolite-activated carbon composite from coal gangue with enhanced adsorption performance

This study reviews the most relevant results on the synthesis, characterization, and applications of activated carbons obtained by novel chemical activation with FeCl3. The text includes a description of the activation mechanism, which compromises three different stages: (1) intense de-polymerization of the carbon precursor (up to 300 °C), (2) devolatilization and formation of the inner porosity (between 300 and 700 °C), and (3) dehydrogenation of the fixed carbon structure (>700 °C). Among the different synthesis conditions, the activation temperature, and, to a lesser extent, the impregnation ratio (i.e., mass ratio of FeCl3 to carbon precursor), are the most relevant parameters controlling the final properties of the resulting activated carbons. The characteristics of the carbons in terms of porosity, surface chemistry, and magnetic properties are analyzed in detail. These carbons showed a well-developed porous texture mainly in the micropore size range, an acidic surface with an abundance of oxygen surface groups, and a superparamagnetic character due to the presence of well-distributed iron species. These properties convert these carbons into promising candidates for different applications. They are widely analyzed as adsorbents in aqueous phase applications due to their porosity, surface acidity, and ease of separation. The presence of stable and well-distributed iron species on the carbons’ surface makes them promising catalysts for different applications. Finally, the presence of iron compounds has been shown to improve the graphitization degree and conductivity of the carbons; these are consequently being analyzed in energy storage applications.

https://www.mdpi.com/2311-5629/6/2/21/pdf

Review on Activated Carbons by Chemical Activation with FeCl3

In this study, low-cost activated carbon (AC) prepared from baobab fruit shells by chemical activation using phosphoric acid was evaluated for the removal of Cu(II) ions from aqueous solution. The prepared activated carbon samples were characterized using N2-adsorption–desorption isotherms, SEM, FTIR, EDX and XRD analysis. The sample activated at 700 °C was chosen as our optimized sample because its physicochemical properties and BET results were similar to those of a commercial sample. The N2-adsorption–desorption results of the optimized sample revealed a BET surface area of 1089 m2/g, micropore volume of 0.3764 cm3/g, total pore volume of 0.4330 cm3/g and pore size of 1.45 nm. Operational parameters such as pH, initial copper concentration, contact time, adsorbent dosage and temperature were studied in a batch mode. Equilibrium data were obtained by testing the adsorption data using three different isotherm models: Langmuir, Freundlich and Dubinin–Radushkevish (D–R) models. It was found that the adsorption of copper correlated well with the Langmuir isotherm model with a maximum monolayer adsorption capacity of 3.0833 mg/g. The kinetics of the adsorption process was tested through pseudo-first-order and pseudo-second-order models. The pseudo-second-order kinetic model provided the best correlation for the experimental data studied. The adsorption followed chemisorption process. The study provided an effective use of baobab fruit shells as a valuable source of adsorbents for the removal of copper ions from aqueous solution. This study could add economic value to baobab fruit shells in Malawi, reduce disposal problems, and offer an economic source of AC to the AC users.

/pdf/synthesis-and-characterization-of-low-cost-activated-carbon-3azux527lz.pdf

Synthesis and characterization of low-cost activated carbon prepared from Malawian baobab fruit shells by H 3 PO 4 activation for removal of Cu(II) ions: equilibrium and kinetics studies

Xiaobao Chen

Papers

Preparation and characterization of benzoic acid-modified activated carbon for removal of gaseous mercury chloride