Mechanism of weld formation during very-high-power ultrasonic additive manufacturing of Al alloy 6061

Microstructure and lap shear strength of the weld interface in ultrasonic welding of Al alloy to stainless steel

The study of dissimilar metals’ welding is an important issue due to their increasing applications in many industrial fields. Welding of dissimilar metals is challenging because of the formation of large residual stress and brittle intermetallic compounds (IMCs). In order to solve this problem, intermediate interlayers were used to eliminate or inhibit the formation of brittle intermetallic reaction layers in many welding techniques, such as diffusion bonding, laser welding, electron beam welding, and other welding techniques. The aim of this paper is to review the recent progress of dissimilar metals’ welding methods and mechanisms with interlayer to offer a basis for the following research. The work discussed several criteria for the selection of interlayer, such as physical properties, metallurgical compatibility, mode, and thickness of the interlayer. Then, formation enthalpy, Gibbs energy of formation (ΔG), and brittleness of the IMCs, as well as welding parameters, were also discussed. Simultaneously, the present work had proposed a design guideline for the selection of interlayer in dissimilar metals’ welding to acquire a welded joint with good quality.

A review on dissimilar metals’ welding methods and mechanisms with interlayer

Applications involving high-power ultrasound are expanding rapidly as ultrasonic intensification opportunities are identified in new fields. This is facilitated through new technological developments and an evolution of current systems to tackle challenging problems. It is therefore important to continually update both the scientific and commercial communities on current system performance and limitations. To achieve this objective, this paper addresses two key aspects of high-power ultrasonic systems. In the first part, the review of high-power applications focuses on industrial applications and documents the developing technology from its early cleaning applications through to the advanced sonochemistry, cutting, and water treatment applications used today. The second part provides a comprehensive overview of measurement techniques used in conjunction with high-power ultrasonic systems. This is an important and evolving field which enables design and process engineers to optimize the behavior and/or operation of key metrics of system performance, such as field distribution or cavitation intensity.

/pdf/review-of-high-power-ultrasound-industrial-applications-and-4j1yyshja1.pdf

Review of high-power ultrasound-industrial applications and measurement methods

Brazing is a 5000-year-old joining process which still meets advanced joining challenges today. In brazing, components are joined by heating above the melting point of a filler metal placed between...

https://tandfonline.com/doi/pdf/10.1080/09506608.2019.1613311

Brazing filler metals

Ultrasonic welding of Ti6Al4V sheet and A6061 aluminum alloy sheet was conducted. The influence of ultrasonic welding parameters on the mechanical properties, the interface microstructure, the micro-hardness and the composition diffusion of the welded joint was investigated. It was shown to be possible to join Ti6Al4V sheet and A6061 aluminum alloy sheet through ultrasonic welding. After ultrasonic welding, the hardness of both the matrices increased, and there appeared to be some amount of diffusion across the welding interface. Various welding pressures and welding times were used and the strength of the welded joint was at its optimal value with a welding pressure of 0.4 MPa and a welding time of 170 ms.

Xiaolong Wang

Papers

Ultrasonic welding of dissimilar metals, AA6061 and Ti6Al4V