In this paper, the recent developments and the characteristics of membrane separators for lithium-ion batteries are reviewed. In recent years, there have been intensive efforts to develop advanced battery separators for rechargeable lithium-ion batteries for different applications such as portable electronics, electric vehicles, and energy storage for power grids. The separator is a critical component of lithium-ion batteries since it provides a physical barrier between the positive and negative electrodes in order to prevent electrical short circuits. The separator also serves as the electrolyte reservoir for the transport of ions during the charging and discharging cycles of a battery. The performance of lithium-ion batteries is greatly affected by the materials and structure of the separators. This paper introduces the requirements of battery separators and the structure and properties of five important types of membrane separators which are microporous membranes, modified microporous membranes, non-woven mats, composite membranes and electrolyte membranes. Each separator type has inherent advantages and disadvantages which influence the performance of lithium-ion batteries. The structures, characteristics, manufacturing, modification, and performance of separators are described in this review paper. The outlook and future directions in this research field are also given.

A review of recent developments in membrane separators for rechargeable lithium-ion batteries

In this review, state-of-the-art polymer electrolytes are discussed with respect to their electrochemical and physical properties for their application in lithium polymer batteries. We divide polymer electrolytes into the two large categories of solid polymer electrolytes and gel polymer electrolytes (GPE). The performance requirements and ion transfer mechanisms of polymer electrolytes are presented at first. Then, solid polymer electrolyte systems, including dry solid polymer electrolytes, polymer-in-salt systems (rubbery electrolytes), and single-ion conducting polymer electrolytes, are described systematically. Solid polymer electrolytes still suffer from poor ionic conductivity, which is lower than 10−5 S cm−1. In order to further improve the ionic conductivity, numerous new types of lithium salt have been studied and inorganic fillers have been incorporated into solid polymer electrolytes. In the section on gel polymer electrolytes, the types of plasticizer and preparation methods of GPEs are summarized. Although the ionic conductivity of GPEs can reach 10−3 S cm−1, their low mechanical strength and poor interfacial properties are obstacles to their practical application. Significant attention is paid to the incorporation of inorganic fillers into GPEs to improve their mechanical strength as well as their transport properties and electrochemical properties.

Polymer electrolytes for lithium polymer batteries

After an introduction reporting the properties and the applications of fluoropolymers, a first part deals with i) the main routes to produce vinylidene fluoride (VDF) monomer, ii) its homopolymerization, and iii) the advantages and uses of polyvinylidene fluoride (PVDF). In a second section, this review, illustrated by numerous examples, extensively reports the synthesis, properties and applications of the copolymers based on VDF with non-halogenated, fluorinated, commercially available or synthesized comonomers. These comonomers exhibit XYC=CZ-Sp-R structures where X, Y, and Z represent H, F, and CF3 groups, Sp a spacer and R a function such as OH, OAc, SAc, CO2R' (R' being a H atom or an alkyl group), CN, P(O)(OR')2 and SO3H. According to the nature and to the amount of the comonomer, the copolymers can be thermoplastic, elastomeric or thermoplastic elastomers. Introducing reactive R side groups brings complementary properties such as hydrophily, ionic exchange or surface properties, or further crosslinking of the resulting copolymers. Then, the kinetics of radical copolymerization of VDF with M comonomers led to the assessment of the reactivity ratios which are compared. Hence, a reactivity series of these M comonomers with respect to a macroradical terminated by VDF is proposed. Usually, these copolymers exhibit random structures but only three comonomers produced alternating copolymers with VDF: hexafluoroisobutylene, F2C=CFCO2CH3, and H2C=C(CF3)CO2R. The controlled radical copolymerizations of VDF with other comonomers (such as chlorotrifluoroethylene, 3,3,3-trifluoropropene, hexafluoropropylene, perfluoromethyl vinyl ether or-trifluoromethacrylic acid) either in the presence of xanthates, borinates or iodo-compounds are also reported. In addition, new VDF-containing copolymers exhibit well-defined architectures, such as block and graft copolymers. They can be synthesized either by conventional techniques or by controlled radical copolymerization. Chemical modifications of PVDF and poly(VDF-co-monomer) copolymers are also presented. Several properties and applications (such as surfactants, dielectrical polymers, thermoplastic elastomers, fuel cell and ultrafiltration membranes, or polycondensates, the fluorinated segments of which bringing softness and thermal stability) of these VDF-containing copolymers will illustrate this review.

/pdf/from-vinylidene-fluoride-vdf-to-the-applications-of-vdf-2wc8ds8t56.pdf

From vinylidene fluoride (VDF) to the applications of VDF-containing polymers and copolymers: recent developments and future trends.

With the booming development of flexible and wearable electronics, their safety issues and operation stabilities have attracted worldwide attentions. Compared with traditional liquid electrolytes, gel polymer electrolytes (GPEs) are preferred due to their higher safety and adaptability to the design of flexible energy storage devices. This review summarizes the recent progress of GPEs with enhanced physicochemical properties and specified functionalities for the application in electrochemical energy storage. Functional GPEs that are capable to achieve unity lithium-ion transference number and offer additional pseudocapacitance to the overall capacitance are carefully discussed. The smart GPEs with self-protection, thermotolerant, and self-healing abilities are particularly highlighted. To close, the future directions and remaining challenges of the GPEs for application in electrochemical energy storages are summarized to provide clues for the following development.

Gel Polymer Electrolytes for Electrochemical Energy Storage

Self-healing materials can repair damage caused by mechanical wear, thereby extending lifetime of devices. A transparent, self-healing, highly stretchable ionic conductor is presented that autonomously heals after experiencing severe mechanical damage. The design of this self-healing polymer uses ion-dipole interactions as the dynamic motif. The unique properties of this material when used to electrically activate transparent artificial muscles are demonstrated.

Xiayu Wang

Papers

Micro-porous P(VDF-HFP)-based polymer electrolyte filled with Al2O3 nanoparticles

Effect of Al2O3 nanoparticles on the electrochemical characteristics of P(VDF-HFP)-based polymer electrolyte