There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality.

Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

I and i

[신간의 별자리x] 우리/미술, 그리고 ‘슬픔의 박물관’

Deposits of clastic carbonate-dominated (calciclastic) sedimentary slope systems in the rock record have been identified mostly as linearly-consistent carbonate apron deposits, even though most ancient clastic carbonate slope deposits fit the submarine fan systems better. Calciclastic submarine fans are consequently rarely described and are poorly understood. Subsequently, very little is known especially in mud-dominated calciclastic submarine fan systems. Presented in this study are a sedimentological core and petrographic characterisation of samples from eleven boreholes from the Lower Carboniferous of Bowland Basin (Northwest England) that reveals a >250 m thick calciturbidite complex deposited in a calciclastic submarine fan setting. Seven facies are recognised from core and thin section characterisation and are grouped into three carbonate turbidite sequences. They include: 1) Calciturbidites, comprising mostly of highto low-density, wavy-laminated bioclast-rich facies; 2) low-density densite mudstones which are characterised by planar laminated and unlaminated muddominated facies; and 3) Calcidebrites which are muddy or hyper-concentrated debrisflow deposits occurring as poorly-sorted, chaotic, mud-supported floatstones. These

Phd by thesis

Additive manufacturing of metallic components – Process, structure and properties

Unlike conventional materials removal methods, additive manufacturing (AM) is based on a novel materials incremental manufacturing philosophy. Additive manufacturing implies layer by layer shaping and consolidation of powder feedstock to arbitrary configurations, normally using a computer controlled laser. The current development focus of AM is to produce complex shaped functional metallic components, including metals, alloys and metal matrix composites (MMCs), to meet demanding requirements from aerospace, defence, automotive and biomedical industries. Laser sintering (LS), laser melting (LM) and laser metal deposition (LMD) are presently regarded as the three most versatile AM processes. Laser based AM processes generally have a complex non-equilibrium physical and chemical metallurgical nature, which is material and process dependent. The influence of material characteristics and processing conditions on metallurgical mechanisms and resultant microstructural and mechanical properties of AM proc...

Laser additive manufacturing of metallic components: materials, processes and mechanisms

A tibial plate implant (10) including an elongate support portion (21) for connection to, and support of, a lengthwise section (14) of a tibia (10), and a connection portion (24) extending laterally from the support portion (21) for connection to an anterior surface of proximal part of the tibia (10). Particularly when the plate is used together with a total knee implant, the arrangement of the plate provides a mechanically strong connection to the anterior surface of a proximal part of the tibia, because fasteners inserted through the plate can extend past either side of an intramedullary keel of a tibial component of the total knee implant.

Implant for tibial fractures

A “modified” meta-stable # titanium alloy that, apart from carbon content, corresponds to the composition range for standard Beta-C titanium alloy. The modified alloy comprises vanadium, chromium, molybdenum, zirconium, aluminium, with maxima for oxygen, iron, nitrogen, hydrogen, yttrium, and other elements (apart from carbon and titanium), with a balance (apart from carbon) of titanium. The modified alloy has carbon present at a stable total carbon level sufficiently in excess of 0.05 wt. % achieving an improvement in the mechanical properties of UTS, DSS and fatigue strength in threaded regions, relative to standard Beta-C alloy with a specified carbon level below 0.05 wt. %, with a maximum carbon content controlled so as to preclude carbide formation having a detrimental effect on the level of fatigue strength.

Improved heat treatable titanium alloy

http://www.cell.com/article/S2405844023007752/pdf

Xinhua Wu

Papers

Implant for tibial fractures

Improved heat treatable titanium alloy

Comparison of risk assessments for venous thromboembolism during the puerperium