Substituted hydroxyapatites for biomedical applications: A review

Micro-Raman and FTIR studies of synthetic and natural apatites

Review of CO2 absorption using chemical solvents in hollow fiber membrane contactors

Synthesis of Si, Mg substituted hydroxyapatites and their sintering behaviors

Over the past 30 years, an enormous array of biomaterials proposed as ideal scaffolds for cell growth have emerged, yet few have demonstrated clinical efficacy. Biomaterials, regardless of whether they are permanent or biodegradable, naturally occurring or synthetic, need to be biocompatible, ideally osteoinductive, osteoconductive, integrative, porous and mechanically compatible with native bone to fulfill their desired role in bone tissue engineering. These materials provide cell anchorage sites, mechanical stability and structural guidance and in vivo, provide the interface to respond to physiologic and biologic changes as well as to remodel the extracellular matrix in order to integrate with the surrounding native tissue. Calcium phosphate ceramics and bioactive glasses were introduced more than 30 years ago as bone substitutes. These materials are considered bioactive as they bond to bone and enhance bone tissue formation. The bioactivity property has been attributed to the similarity between the surface composition and structure of bioactive materials, and the mineral phase of bone. The drawback in using bioactive glasses and calcium phosphate ceramics is that close proximity to the host bone is necessary to achieve osteoconduction. Even when this is achieved, new bone growth is often strictly limited because these materials are not osteoinductive in nature. Bone has a vast capacity for regeneration from cells with stem cell characteristics. Moreover, a number of different growth factors including bone morphogenetic proteins, have been demonstrated to stimulate bone growth, collagen synthesis and fracture repair both in vitro and in vivo. Attempts to develop a tissue-engineering scaffold with both osteoconductivity and osteoinductivity have included loading osteoinductive proteins and/or osteogenic cells on the traditional bioactive materials. Yet issues that must be considered for the effective application of bioceramics in the field of tissue engineering are the degree of bioresorption and the poor mechanical strength. The synthesis of a new generation of biomaterials that can specifically serve as tissue engineering scaffolds for drug and cell delivery is needed. Nanotechnology can provide an alternative way of processing porous bioceramics with high mechanical strength and enhanced bioactivity and resorbability.

Bone reconstruction: from bioceramics to tissue engineering.

Analysis of CO2 removal by hollow fiber membrane contactors

Synthesis and Characterization of Silicon Substituted Hydroxyapatite

Pervaporation of fluoroethanol/water and methacrylic acid/water mixtures through PVA composite membranes

Analysis of permeation rate of cobalt ions across a supported liquid membrane containing HEH(EHP)

Pure glycerol could be obtained from a biodiesel byproduct by separation processes including neutralization, precipitation, and distillation. The contents of distilled glycerol through the above separation processes were measured and the results were compared according to experimental conditions such as acid concentration and precipitation temperature. Neutralization processes were carried out in the concentration range of 5~37 wt% hydrochloric acid, 5~95 wt% sulfuric acid, and 5~85 wt% phosphoric acid, respectively. Precipitation temperatures in neutralization were controlled in the range of 293~333 K. Higher values of the distilled glycerol content were obtained due to the salt removal in the pretreatment case of neutralization with 10 wt% sulfuric acid and precipitation of 313 K with 85 wt% phosphoric acid, respectively. The variations of acid concentration and precipitation temperature in pretreatment steps affected to some extent glycerol recovery from the biodiesel byproduct.

Glycerol Separation from Biodiesel Byproduct

Yongtaek Lee

Papers

Analysis of CO2 removal by hollow fiber membrane contactors

Synthesis and Characterization of Silicon Substituted Hydroxyapatite

Pervaporation of fluoroethanol/water and methacrylic acid/water mixtures through PVA composite membranes

Analysis of permeation rate of cobalt ions across a supported liquid membrane containing HEH(EHP)

Glycerol Separation from Biodiesel Byproduct