Renewable Resources Robert-Jan van Putten,†,‡ Jan C. van der Waal,† Ed de Jong,*,† Carolus B. Rasrendra,‡,⊥ Hero J. Heeres,*,‡ and Johannes G. de Vries* †Avantium Chemicals, Zekeringstraat 29, 1014 BV Amsterdam, the Netherlands ‡Department of Chemical Engineering, University of Groningen, Nijenborgh 4, 9747 AG Groningen, the Netherlands Stratingh Institute for Chemistry, University of Groningen, Nijenborgh 4, 9747 AG Groningen, the Netherlands DSM Innovative Synthesis BV, P.O. Box 18, 6160 MD Geleen, the Netherlands Department of Chemical Engineering, Institut Teknologi Bandung, Ganesha 10, Bandung 40132, Indonesia

Hydroxymethylfurfural, A Versatile Platform Chemical Made from Renewable Resources

Hydrothermal technologies are broadly defined as chemical and physical transformations in high-temperature (200–600 °C), high-pressure (5–40 MPa) liquid or supercritical water. This thermochemical means of reforming biomass may have energetic advantages, since, when water is heated at high pressures a phase change to steam is avoided which avoids large enthalpic energy penalties. Biological chemicals undergo a range of reactions, including dehydration and decarboxylation reactions, which are influenced by the temperature, pressure, concentration, and presence of homogeneous or heterogeneous catalysts. Several biomass hydrothermal conversion processes are in development or demonstration. Liquefaction processes are generally lower temperature (200–400 °C) reactions which produce liquid products, often called “bio-oil” or “bio-crude”. Gasification processes generally take place at higher temperatures (400–700 °C) and can produce methane or hydrogen gases in high yields.

/pdf/thermochemical-biofuel-production-in-hydrothermal-media-a-57itjyvhnt.pdf

Thermochemical biofuel production in hydrothermal media: A review of sub- and supercritical water technologies

https://digital.csic.es/bitstream/10261/113789/1/Production_carbon_Sevilla.pdf

The production of carbon materials by hydrothermal carbonization of cellulose

Hydrothermal liquefaction of biomass: A review of subcritical water technologies

Roles of water for chemical reactions in high-temperature water

Decomposition experiments of microcrystalline cellulose were conducted in subcritical and supercritical water (25 MPa, 320−400 °C, and 0.05−10.0 s). At 400 °C hydrolysis products were mainly obtained, while in 320−350 °C water, aqueous decomposition products of glucose were the main products. Kinetic studies of cellulose, cellobiose, and glucose at these conditions showed that below 350 °C the cellulose decomposition rate was slower than the glucose and cellobiose decomposition rates, while above 350 °C, the cellulose hydrolysis rate drastically increased and became higher than the glucose and cellobiose decomposition rates. Direct observation of the cellulose reaction in high-temperature water at high-pressure conditions by using a diamond anvil cell (DAC) showed that, below 280 °C, cellulose particles became gradually smaller with increasing reaction time but, at high temperatures (300−320 °C), cellulose particles disappeared with increasing transparency and much more rapidly than expected from the lowe...

Yoshiko Fukushima

Papers

Dissolution and Hydrolysis of Cellulose in Subcritical and Supercritical Water