A power conversion device includes a power switching circuit that supplies AC voltages generated between switching elements operating as upper arms and switching elements operating as lower arms, and a control circuit that generates and supplies to the driver circuit signals for controlling the switching operation of the switching elements by a PWM method in a first operational region in which frequency of an AC power to be outputted is low, and that generates and supplies to the driver circuit signals for controlling the switching operation of the switching elements at timings based upon the phase of the AC power to be outputted in an operational region in which the frequency of the AC power to be outputted is higher than in the first operational region.

Power Conversion Device

A driving/braking force manipulation control input of a k-th wheel, which denotes one or more specific wheels among a plurality of wheels of a vehicle, is determined such that a required condition concerning a relationship among a road surface reaction force that may act from a road surface on the k-th wheel on the basis of the detected values or estimated values of a side slip angle and a friction characteristic of the k-th wheel, a feedback control input related to the driving/braking force of the k-th wheel for bringing a difference between a state amount of the vehicle and a reference state amount close to zero, a driving/braking force feedforward control input based on a drive manipulated variable supplied by a driver of the vehicle, and a k-th wheel driving/braking force manipulation control input is satisfied. This arrangement makes it possible to properly control a motion of an actual vehicle to a desired motion while properly considering the characteristics of a road surface reaction force acting from a road surface on a wheel.

Vehicle Control Device

A regenerative braking system has a generator connected to at least one wheel set to apply regenerative brake torque to it by generating electricity, a regenerative braking control means controlling a regenerative braking amount, an actual wheel speed variation calculating means calculating an actual wheel speed variation between actual outer-wheel speed of an outer wheel of steerable wheels and actual inner-wheel speed of at least one wheel of front and rear wheel sets, a correspondent wheel speed variation calculating means calculating a correspondent wheel speed variation corresponding to an outer-to-inner wheel speed variation of the steerable wheels with road grip, a steer characteristic judging means judging strength of a steer characteristic based on the correspondent wheel speed variation and the actual wheel speed variation, and a regenerative braking amount compensating means compensating the amount to be more decreased as the steer characteristic becomes stronger.

Regenerative braking system for motor vehicles

In a vehicle equipped for regenerative and non-regenerative braking, regenerative braking only is applied to predetermined wheels in response to braking demand when the driver attempts to slow the vehicle at a first rate (<D 1 ft/sec 2 ), no wheel locking on any braking wheel as indicated by an anti-lock braking system controller and speed exceeds a minimum threshold. If braking is applied in a turn, appropriate amount of non-drive wheel service/foundation brake torque to maintain vehicle stability is applied. The appropriate amount of foundation braking to be applied is determined by the amount of vehicle yaw, steering wheel input and vehicle speed by using a look-up table. As braking demand increases foundation/service braking is added, first to any wheels not providing for regenerative braking and later to wheels having regenerative braking.

Regenerative brake system reset feature and adaptive calibration for hybrid and electric vehicles

When a brake ECU is started up rapidly by a brake pedal operation, the brake ECU executes a depression force fluid pressure mode. When the control pressure detected by a control pressure sensor becomes smaller than a switching determination threshold value, the brake ECU determines that an operation of returning a brake pedal is being performed, and switches the braking mode from the depression force fluid pressure mode to a normal control mode. Accordingly, even when the operation of a stroke simulator has been started, no uncomfortable feeling is given to a driver. Further, even when the operation of returning the brake pedal is not being performed, the braking mode is switched from the depression force fluid pressure mode to a simulator non-operation control fluid pressure mode when a vehicle starts to travel. Consequently, desired braking force can be rapidly generated.

Brake control device

A regenerative braking control apparatus for a wheeled vehicle, includes: a regenerative braking unit arranged to produce a regenerative braking effort for the vehicle; and a control unit connected for signal communication to the regenerative braking unit, and configured to perform the following: measuring a wheel speed deviation defined as a difference between a speed of a front wheel set of the vehicle and a speed of a rear wheel set of the vehicle; and controlling the regenerative braking effort in accordance with the wheel speed deviation during cornering. The control unit is configured to control the regenerative braking effort to decrease with an increase in the wheel speed deviation during cornering braking, and configured to perform braking for the vehicle in accordance with an operation of slowdown request, prioritizing a regenerative braking effort for one of the front wheel set and the rear wheel set of the vehicle.

Yoshiyuki Izu

Papers

Vehicle regenerative braking control apparatus and method