Insight on corrosion behavior of friction stir welded AA2219/AA2195 joints in astronautical engineering

Laser joining of CFRTP to titanium alloy via laser surface texturing

Microstructure and tensile properties of rapid-cooling friction-stir-welded AZ31B Mg alloy along thickness direction

This paper investigates the numerical simulations of multi-kilowatt disk laser and fiber laser welding, ranging from 6 to 18 kW to study the behavior of molten pool in 20-mm-thick steel plate by using Volume-Of-Fluid (VOF) method and several mathematical models like Gaussian heat source, recoil pressure, Marangoni flow, buoyancy force, and additional shear stress and heat source due to the metallic vapor. Vortex flow pattern is observed for higher laser power except for 6-kW case, and the higher the laser power, the bigger the vortex flow pattern. Welding speed has an influence on molten pool in terms of depth of penetration and size of molten pool, but overall shape of molten pool remains the same. The reasons for the vortex flow pattern in high-power laser welding are the absorption of more energy at the bottom of keyhole, which promotes more liquid metal at the bottom, while for lower power with lower speed, the melt formation is more uniform in the thickness direction and most of the molten metal in the lower part of keyhole reaches the top of molten pool, and consequently, no vortex flow pattern is observed in the keyhole bottom.

Characteristics of Weld Pool Behavior in Laser Welding with Various Power Inputs

This article provides a comprehensive review of the advancements made in the diffusion bonding of titanium and its alloys to other advanced materials such as aluminium, stainless steel, and magnesium. This combination of advanced alloys has received considerable attention in different industries, including aerospace, petrochemical, and nuclear applications due to high specific strength, lightweight, corrosion resistance, and moderate to high mechanical properties. The mechanisms of bond formation are discussed based on the type of microstructures formed and the mechanical properties achieved. The scientific literature identifies various methods/processes for controlling the volume of intermetallic compounds formed within the joint regions, as well as ways of maximising the strength of the weld/joints. This paper discusses the relationship between weld/bond properties and bonding parameters such as time, temperature, surface roughness, pressures, interlayer composition, and thickness. The scientific literature also shows that the bonding mechanisms and microstructural evolution of the bond zone can be significantly affected by suitable optimization of the bonding parameters. Additionally, this is a method of maximising bond strength.

https://www.mdpi.com/2504-4494/4/2/39/pdf

Yu-xuan Luo

Papers

Effect of cooling conditions on corrosion resistance of friction stir welded 2219-T62 aluminum alloy thick plate joint

Microstructure and high-temperature mechanical properties of laser beam welded TC4/TA15 dissimilar titanium alloy joints