Patent
Aluminum alloy for casting
Reads0
Chats0
TLDR
In this paper, the compositional amt. of the Al-Ti-C aluminum alloy for casting, based on pure aluminum contg. inevitable impurities, is specified.Abstract:
PROBLEM TO BE SOLVED: To obtain an alloy in which the Al3Ti structure formed in the solidifying stage is refined, thereby shrinkage cavities are reduced, plastic working is hardly needed, and cracking is hard to be generated even if plastic working is executed, to pure aluminum contg. inevitable impurities, by specifying the compositional amt. of carbon and the compositional amt. of titanium with respect to pure aluminum with inevitable impurities. SOLUTION: In an Al-Ti-C aluminum alloy for casting, based on pure aluminum contg. inevitable impurities, the compositional amt. of carbon is controlled to 0.1 to 1.5 wt.%, and the compositional amt. of titanium lies in the range in which the value subtracted four times of the carbon compositional amt. (weight%) from the titanium compositional amt. (weight%) is made 1.6 to 13 wt.%. In this aluminum alloy for casting, the Al3Ti structure formed in the solidifying stage is refined and uniformized, so that shrinkage cavities in the cast product can remarkably be reduced to improve the productive yield, furthermore, defects in the product are few, the quality and strength are improved, and cracking in the product is hard to be generated even if plastic working is executed.read more
Citations
More filters
Patent
A HIGH CRASHWORTHINESS AL-SI-Mg ALLOY AND METHODS FOR PRODUCING AUTOMOTIVE CASTING
TL;DR: In this paper, the authors presented a casting having increased crashworthiness including an aluminum alloy of about 6.0 wt % to about 8.0wt % and a Si alloy of approximately 0.12 wt% to about 0.15wt% with critical fracture strain greater than 10%.
Patent
Process for casting aluminum alloy wheel and heat treatment process
TL;DR: In this paper, a process for casting an 8356 type A356 aluminum alloy wheel and a heat treatment process is described, where a filter screen is arranged at a riser tube to effectively prevent inclusions.
Patent
Preparation method for special aluminum-silicon-magnesium alloy for advanced car wheel hub
Zang Ligen,Mao Yiguo,Zhen Yuejun,Cai Zhenbin,Guo Yinhe,Wang Dalong,Gao Haitao,Jingshan Li,Xinjian Zhao,Yang Mingjuan +9 more
Patent
Low-pressure casting technology for aluminum alloy hubs
TL;DR: In this article, a low-pressure casting technology for aluminum alloy hubs is proposed, which includes the steps of 1, smelting aluminum alloy and obtaining molten aluminum, wherein the molten aluminum mainly comprises, by weight percentage, 6.8-7.2% of Si, 4.5-5% of Mg, 0.1-0.15% of Ti and the balance Al.
Patent
PRECIPITATION-HARDENING Al ALLOY, AND METHOD OF HEAT TREATMENT FOR PRECIPITATION-HARDENING ALLOY
Takayuki Sakai,崇之 酒井 +1 more
TL;DR: In this article, a precipitation hardening type Al alloy is obtained by heat-treating an Al alloy having a working strain and formed with recrystallized grains and subcrystal grains, and has a tensile strength of 320 MPa or more, 0.2% proof stress of 300 MPa, and an elongation of 15% or more.