Journal ArticleDOI
Influence of orthogonal burnishing parameters on surface characteristics for various materials
M.H. El-Axir,M.M El-Khabeery +1 more
Reads0
Chats0
TLDR
In this paper, the effect of four roller burnishing tool parameters, namely, speed, depth of penetration, burnishing time and initial hardness of five different materials on the surface hardness, the out-of-roundness and the change in workpiece diameter was investigated.About:
This article is published in Journal of Materials Processing Technology.The article was published on 2003-01-10. It has received 88 citations till now. The article focuses on the topics: Burnishing (metal) & Roller burnishing.read more
Citations
More filters
Journal ArticleDOI
Analysis and optimization of the ball burnishing process through the Taguchi technique
T. A. El-Taweel,M. H. El-Axir +1 more
TL;DR: In this paper, the analysis and optimization of the ball burnishing process has been studied and the Taguchi technique is employed to identify the effect of burnishing parameters, i.e., burnishing speed, burnishing feed, burnish force and number of passes, on surface roughness, surface micro-hardness, improvement ratio, and improvement ratio of surface microhardness.
Journal ArticleDOI
Finite Element Modeling of Roller Burnishing Process
TL;DR: In this article, 2D and 3D finite element models for hard roller burnishing were established and the simulation results (i.e. surface deformation and residual stress) were evaluated and compared between initial hard turned and burnished surfaces.
Journal ArticleDOI
Quality improvement of ball-end milled sculptured surfaces by ball burnishing
TL;DR: In this article, the use of the ball burnishing process to improve the final quality of form tools (moulds and dies) is studied, which can be easily applied in the same machining centres as those used for milling.
Journal ArticleDOI
Influence of roller burnishing contact width and burnishing orientation on surface quality and tribological behaviour of Aluminium 6061
TL;DR: In this article, the impact of burnishing speed, burnishing force and burnishing tool dimension on the surface qualities and tribological properties were investigated, and it was found that a simple tool with interchangeable adapter for ball and roller were designed and fabricated to perform roller burnishing processes on Aluminium 6061 under different parameters and different burnishing orientations.
Journal ArticleDOI
Characteristics of Rb40 steel superficial layer under ball and roller burnishing
TL;DR: In this article, the authors developed a device for mechanical plastic deformation of structural Rb40 steel using ball and roller burnishing and investigated the evolution of associated roughness, hardness and wear resistance.
References
More filters
Journal ArticleDOI
An Investigation into Roller Burnishing
TL;DR: In this paper, the influence of different burnishing conditions on both surface microhardness and roughness was investigated, namely, burnishing speed, force, feed, and number of passes.
Journal ArticleDOI
Influence of burnishing process on surface roughness, hardness, and microstructure of some non-ferrous metals
TL;DR: In this article, the influence of the main burnishing parameters (speed, feed, force, number of tool passes, and ball diameter) on the surface roughness and the hardness of two different non-ferrous metals were studied.
Journal ArticleDOI
A study of the effects of ball-burnishing parameters on surface roughness using factorial design
N.H. Loh,S.C. Tam,S. Miyazawa +2 more
TL;DR: In this paper, the effects of ball-burnishing parameters on the surface roughness of AISI 1045 specimens were analyzed using the analysis-of-variance technique and the F-test.
Journal ArticleDOI
Improvement in the wear resistance of brass components by the ball burnishing process
TL;DR: In this paper, a ball-burnishing tool was used to improve the surface roughness and surface hardness of brass components and a simple wear-testing device was designed and constructed to meet the present work requirements.
Journal ArticleDOI
Statistical analyses of the effects of ball burnishing parameters on surface hardness
N.H. Loh,S.C. Tam,S. Miyazawa +2 more
TL;DR: In this article, the effects of ball burnishing parameters on the surface hardness of flat AISI 1045 specimens were investigated and it was shown that the following parameters have significant effects on surface hardness: depth of penetration, feed, lubricant and ball material.
Related Papers (5)
Experimental techniques for studying the effects of milling roller-burnishing parameters on surface integrity
M.M. El-Khabeery,M.H. El-Axir +1 more