Patent
Preparation of electrostatic image developing toner
Reads0
Chats0
TLDR
In this article, an electrostatic image developing toner causing low fog at a small cost of power was obtained by preliminarily pulverizing a roughly crushed toner material with an impact breaker, and finely pulverising it with a jet mill.Abstract:
PURPOSE:To effectively obtain an electrostatic image developing toner causing low fog at a small cost of power, by preliminarily pulverizing a roughly crushed toner material with an impact breaker, and finely pulverizing it with a jet mill. CONSTITUTION:A raw toner material consisting of synthetic resin, carbon black, etc. is roughly crushed with a hammer mill, etc., and preliminarily pulverized with an impact breaker having a rotor 2 provided with beater blades 2a so as to make weight average particle diameter not to exceed 50mum. Then, it is further micropulverized by beating the pulverized particles 1 with ultrahigh speed air streams injected from a jet nozzle 4 using a jet pulverizer, thus permitting both advantages of the impact and jet pulverizers to be adopted, microparticles causing fog to be prevented, and an intended electrostatic image developing toner to be effectively obtained.read more
Citations
More filters
Patent
Toner for forming an image, image forming method and heat-fixing method
TL;DR: A toner for forming an image has toner particles containing at least a colorant, a binder resin and a wax as mentioned in this paper, and the wax has an endothermic main peak as measured by DSC of 60 to 120° C.
Patent
Toner for electrophotography
TL;DR: In this article, the terpene-phenol copolymer was used for electrophotography and the molar concentration of one of the L-lactic acid units in a lactic acid component of the polylact acid type biodegradable resin is in the range between about 75 mol % and about 98 mol %.
Patent
Method for producing toner for electrostatic development
TL;DR: In this paper, a mixture of starting toner materials comprising at least a resin and a colorant is kneaded, extruded and cooled to obtain a toner material.
Patent
Method and device for manufacturing electrostatically charged image developing toner
Hitoshi Kanda,Kato Masakichi +1 more
TL;DR: In this paper, the authors proposed a method to efficiently manufacture a toner having a minute grain size distribution by feeding fine powder which has eliminated coarse powder, to a multi-division classifying means, and classifying it to three kinds of viscosity sections of above a prescribed grain size, the prescribed grain sizes, and below the prescribedgrain sizes.
Patent
Grinder for developer
TL;DR: In this paper, the inside of a casing provided with a feed port and discharging port for a kneaded mixture of a binder resin and a coloring agent consists of an inlet volute chamber and a distributor, where the ground material charged into the chambers uniformly in the grinding chambers, whereby a grinding device is manufactured.
References
More filters
Patent
Developer for electrophotography
TL;DR: In this paper, the authors improved the defect that the selecting range of the resins used as toner materials is narrow by mixing non-magnetic toner with specific fine particles on the surface with a carrier which is on the side opposite from said fine particles in friction charging series.