scispace - formally typeset
Journal ArticleDOI

Sulfide Stress Cracking Failures of 12Cr and 17-4PH Stainless Steel Wellhead Equipment

Richard M. Thompson, +3 more
- 01 Mar 1991 - 
- Vol. 47, Iss: 3, pp 216-220
TLDR
Sulfide stress cracking case histories of 12Cr and 17-4PH stainless steel tubing hangers are presented along with the results of NACE Standard TM0177 laboratory tests performed on the fail-safe hangers.
Abstract
Sulfide stress cracking case histories of 12Cr and 17-4PH stainless steel tubing hangers are presented along with the results of NACE Standard TM0177 laboratory tests performed on the fail...

read more

Citations
More filters
Journal ArticleDOI

Hydrogen embrittlement susceptibility and permeability of two ultra-high strength steels

TL;DR: In this article, the effect of hydrogen embrittlement on notched tensile strength and fracture characteristics of two ultra-high strength steels (PH 13-8 Mo stainless steel and T-200 maraging steel) was determined by an electrochemical permeation method.
Journal ArticleDOI

Effect of aging treatment on hydrogen embrittlement of PH 13-8 Mo martensite stainless steel

TL;DR: In this paper, the effect of aging treatment on hydrogen embrittlement of PH 13-8 Mo steel was investigated by tensile tests, and the results showed that hydrogen slightly increases the tensile strength of the steel at high tensile rate (20mm/min), but decreases the strength at low tensile rates (0.5mm/mm) and 0.03 mm/min).
Journal ArticleDOI

Embrittlement of laser surface-annealed 17-4 PH stainless steel

TL;DR: In this article, Zhao et al. determined stress corrosion cracking and fatigue crack growth behavior in 17-4 PH stainless steel under various metallurgical conditions, including the H900 (482°C/1 h), H1025 (552°c/4 h) aging and laser surface annealing treatments.
Journal ArticleDOI

The influence of aging treatments on sulfide stress corrosion cracking of PH 13-8 Mo steel welds

TL;DR: In this paper, a slow displacement rate tensile test was carried out to study sulfide stress corrosion cracking (SSCC) of PH 13-8 Mo stainless steel welds in a saturated H 2 S solution.
Journal ArticleDOI

Gaseous hydrogen embrittlement of PH 13-8 Mo steel

TL;DR: In this paper, notched tensile and fatigue crack growth tests in gaseous hydrogen were performed on PH 13-8 Mo stainless steel specimens at room temperature, and the same fracture mechanism could be applied to these two different types of specimens, regardless of the loading conditions.