Is unfired black powder corrosive?
Answers from top 6 papers
More filters
| Papers (6) | Insight |
|---|---|
13 Citations | Mo powder is moderately toxic, however, as an alloying element it is non-toxic. |
42 Citations | This P/S ratio demonstrated that the additives in the residues did not greatly change relative to the unfired powder, providing a useful indicator to aid in forensic powder and residue evaluation. |
| Assessment analysis points to the possibility of black powder being generated in some processing units and in the sales gas pipeline. | |
11 Citations | The comparisons conducted in this case revealed that black powder revolvers produce large amounts of unusual residues which supplement the usual range of firearm evidence to make even complex reconstructions possible. |
11 Citations | It was demonstrated that the effects observed could be explained by a weak dependence of the burning rate of black powder on the pressure. |
12 Citations | Wounds inflicted by black powder handguns may be detected more or less reliably. |
Related Questions
What are the physical and chemical properties of black sand?5 answersBlack sand exhibits diverse physical and chemical properties based on its composition and origin. It can contain minerals like Albite, as seen in black sand from Rosetta, Egypt, which enhances mechanical properties when incorporated into rubber. Black alkali soils in India are characterized by high clay content, sodium saturation, and low calcium levels, affecting water transmission and productivity. Additionally, black sand devices prepared from kaolin and carbon slag show high thermal stability, resistance to oxidation, and corrosion, making them suitable for cooking applications. Synthesized black powder materials like La2NiO4 display specific phases, morphology, and chemical bonds, with elements like nickel oxide and lanthanum oxide dominating the composition. Furthermore, black soils in Karnataka vary in pH, electrical conductivity, organic carbon content, particle size distribution, cation exchange capacity, and potassium availability, reflecting differences in clay mineralogy and management practices.
Does stainless steel corrode with carbonates?5 answersStainless steel can corrode when exposed to carbonates. The corrosion rate and mechanism depend on various factors such as the specific carbonate composition, gas environment, and exposure conditions. In some cases, the presence of carbonates can accelerate the corrosion of stainless steel, leading to the formation of porous scales. However, the corrosion resistance of stainless steel can be improved by using certain pretreatment methods or coatings. For example, in-situ corrosion pretreatment with N2-20%O2 gas can suppress the dissolution of corrosion products and enhance corrosion resistance. Additionally, the use of stainless steel reinforcement in chloride-contaminated concrete has been studied, and certain stainless steel alloys have shown good corrosion resistance even in carbonated concrete and harsh exposure conditions. Overall, the corrosion behavior of stainless steel in carbonates is influenced by various factors and can be mitigated through appropriate pretreatment or material selection.
How to remove impurities from aqueous leachate of spent LFP black powder?4 answersImpurities can be removed from the aqueous leachate of spent LFP black powder through various methods. One method involves adding iron powder to the leachate, stirring, and then filtering to obtain a copper-removed solution. Another method utilizes co-precipitation thermodynamics to selectively precipitate aluminum and fluoride ions in the form of AlPO4 and FeF3 by adjusting the pH value. Additionally, a filtering device can be used to efficiently remove impurities from the remaining sludge of the powder-containing carrier. Another method involves leaching the waste polishing powder containing silicon aluminum impurities with an alkali solution, followed by cooling and filtering to remove the impurities. These methods provide effective ways to remove impurities from the aqueous leachate of spent LFP black powder.
What is the mechanism of black oxide formation on 316L stainless steel?5 answersThe mechanism of black oxide formation on 316L stainless steel involves the interaction of oxygen with the surface of the steel. Machining of the steel promotes the formation of a thin ultrafine-grained layer, which develops a more porous and fine-grained inner oxide compared to polished surfaces. In additive manufacturing processes, extraneous oxygen in the process environment contributes to the formation of oxide inclusions in the solidified microstructure of the steel. During the early stages of oxidation at high temperatures, oxide grains with inhomogeneous elemental distribution of chromium (Cr) and iron (Fe) are formed, consisting of consecutive Cr-rich and Fe-rich layers parallel to the surface. Work hardening induced by surface finishes affects the oxidation of the steel, leading to the formation of a double-layered oxide scale with an external layer of Fe-rich oxides. When a hardening threshold is reached, a switch in oxidation mechanisms occurs, resulting in a thinning of the oxide scale due to the formation of a Cr-rich internal oxide layer.
How can the black oxide formation on 316L stainless steel be prevented?5 answersBlack oxide formation on 316L stainless steel can be prevented through various methods. One approach is to use selective oxidation pre-treatments under H2-H2O atmospheres at high temperatures, which results in the formation of oxide films that reduce coke deposition and inhibit the growth of carbon deposits. Another method is the use of boronizing treatment, which increases the oxidation resistance of the steel and prevents oxygen penetration into the substrate at high temperatures. Surface Mechanical Attrition Treatment (SMAT) has also been found to be effective in inhibiting oxidation by promoting the growth of chromia instead of hematite. Additionally, controlling the particle size of the powder oxide state during additive manufacturing processes can help prevent black oxide formation. By combining these approaches, it is possible to minimize or prevent black oxide formation on 316L stainless steel.
What is the effect of soil corrosiveness on Ecorr?4 answersSoil corrosiveness has an effect on Ecorr, or the oxidation-reduction potential of the soil. The electrochemical properties of artificial soil were found to be significantly different from natural soil, with artificial soil having low resistivity and a moderate degree of stray current. Additionally, the corrosion of metal mesh in rocky slopes was found to be stronger in artificial soil compared to natural soil. The results suggest that metal mesh rocky slopes should be closely monitored, especially at lower slope positions, to prevent soil collapse and ecosystem degradation. The soil corrosiveness evaluation method for transformer substations involves determining parameters such as electric resistivity and pH value of the soil, and rating the physical and chemical properties of the soil sample. This method can be used to evaluate soil corrosiveness in various industries.