A balanced mechanics-materials approach and coverage of the latest developments in biomaterials and electronic materials, the new edition of this popular text is the most thorough and modern book available for upper-level undergraduate courses on the mechanical behavior of materials To ensure that the student gains a thorough understanding the authors present the fundamental mechanisms that operate at micro- and nano-meter level across a wide-range of materials, in a way that is mathematically simple and requires no extensive knowledge of materials This integrated approach provides a conceptual presentation that shows how the microstructure of a material controls its mechanical behavior, and this is reinforced through extensive use of micrographs and illustrations New worked examples and exercises help the student test their understanding Further resources for this title, including lecture slides of select illustrations and solutions for exercises, are available online at wwwcambridgeorg/97800521866758

/pdf/mechanical-behavior-of-materials-244bo22qlo.pdf

Mechanical Behavior of Materials

Mechanical behaviour and structural changes, such as the evolution of grain and dislocation structures and the formation of slip lines and grain-boundary-sliding traces, of a submicron-grained (SMG) copper during room-temperature compression have been studied. It is suggested that the absorption of dislocations into grain boundaries (GBs) is due to the migration and sliding of some highly non-equilibrium GBs during the deformation process and is influenced by high level internal stresses. From this point of view, the unusual behaviour of SMG copper, in particular, the high yielding and flow stresses, the absence of strain hardening, high plasticity and low strain rate sensitivity, are explained. Analogies of the mechanical behaviour of SMG copper with mechanical properties of metallic materials at large plastic strains in stage IV are discussed.

Deformation behaviour of ultra-fine-grained copper

The ability to achieve a high tensile ductility in a polycrystalline material is of interest both from a scientific point of view and also because of potential applications in the materials forming industry. The superplasticity of conventional metallic alloys is now well-documented and understood reasonably well. However, the field of superplasticity has expanded recently beyond the traditional metallic alloys to include evidence of superplastic-like behavior in a very wide range of new and advanced materials. To date, superplasticity has been reported in mechanically alloyed metals, metal matrix composites, ceramics, ceramic matrix composites and intermetallic compounds. This review presents an overview of these new developments using the established behavior of conventional metallic alloys as a standard for comparison with the mechanical properties of these new materials. As well be demonstrated, the new materials often exhibit significant differences in their flow characteristics in comparison with the traditional superplastic metallic alloys. The successful utilization of superplastic materials in forming applications requires an understanding of the failure processes occurring in the materials in terms of both the localization of external flow and the accumulation of internal damage through the nucleation and growth of cavities. These problems are also addressed in this review.

Superplasticity in advanced materials

The relationship between stress and strain rate is often sigmoidal in superplastic materials, with a low strain rate sensitivity at low and high strain rates (regions I and III, respectively) and a high strain rate sensitivity at intermediate strain rates (region II) where the material exhibits optimal superplasticity This relationship is examined in detail, with reference both to the conflicting results reported for the Zn-22 pct Al eutectoid alloy and to the significance of the three regions of flow

The mechanical properties of superplastic materials

The superplastic behavior of the composite Y-TZP/Al{sub 2}O{sub 3} (20 wt%) in uniaxial tension has been evaluated. Large elongation (>200%) indicated superplasticity. The stress exponent and activation energy of thee composite were found to be the same order with those of Y-TZP. The flow behavior of the composite containing Al{sub 2}O{sub 3} grains could be described by a rheological model as a non-Newtonian flow modified by the second-phase grains. The cavitation damage and the creep crack growth could be reduced by keeping the strain rate low enough that a specimen elongated 100% at elevated temperature maintained a strength of 1,800 MPa at room temperature.

Superplasticity of TZP/Al sub 2 O sub 3 composite

The microstructural aspects of the superplastic phenomenon are reviewed. The experimental results of a very large number of investigations are critically analysed in the context of: grain shape and size; grain growth; grain boundary sliding and migration, grain rotation and rearrangement; diffusion and dislocation activity. It is shown, that in spite of often conflicting evidence in the literature, a common pattern of microstructural behaviour emerges for all the materials and conditions investigated to date.

A. Arieli

Papers

Microstructural aspects of superplasticity

On the region I in superplasticity