A Review on Photovoltaic/Thermal Hybrid Solar Technology

The non-combustion based renewable electricity generation technologies were assessed against a range of sustainability indicators and using data obtained from the literature. The indicators used to assess each technology were price of generated electricity, greenhouse gas emissions during full life cycle of the technology, availability of renewable sources, efficiency of energy conversion, land requirements, water consumption and social impacts. The cost of electricity, greenhouse gas emissions and the efficiency of electricity generation were found to have a very wide range for each technology, mainly due to variations in technological options as well as geographical dependence of each renewable energy source. The social impacts were assessed qualitatively based on the major individual impacts discussed in literature. Renewable energy technologies were then ranked against each indicator assuming that indicators have equal importance for sustainable development. It was found that wind power is the most sustainable, followed by hydropower, photovoltaic and then geothermal. Wind power was identified with the lowest relative greenhouse gas emissions, the least water consumption demands and with the most favourable social impacts comparing to other technologies, but requires larger land and has high relative capital costs.

/pdf/assessment-of-sustainability-indicators-for-renewable-energy-15v882jasq.pdf

Assessment of sustainability indicators for renewable energy technologies

Over the last 30 years, a large amount of research on PV-Thermal (PVT) collectors has been carried out. An overview of this research is presented, both in terms of an historic overview of research projects and in the form of a thematic overview, addressing the different research issues for PVT.

/pdf/flat-plate-pv-thermal-collectors-and-systems-a-review-1jg2esjiop.pdf

Flat-plate PV-Thermal collectors and systems : a review

Sustainable development requires methods and tools to measure and compare the environmental impacts of human activities for various products (goods and services). Providing society with goods and services contributes to a wide range of environmental impacts. Environmental impacts include emissions into the environment and the consumption of resources as well as other interventions such as land use, etc. Life cycle assessment (LCA) is a technique for assessing environmental loads of a product or a system. The aim of this paper is to review existing energy and CO2 life cycle analyses of renewable sources based electricity generation systems. The paper points out that carbon emission from renewable energy (RE) systems are not nil, as is generally assumed while evaluating carbon credits. Further the range of carbon emissions from RE systems have been found out from existing literature and compared with those from fossil fuel based systems, so as to assist in a rational choice of energy supply systems.

/pdf/lca-of-renewable-energy-for-electricity-generation-systems-a-31kn4zq2b9.pdf

LCA of renewable energy for electricity generation systems—A review

Hybrid PV/T solar systems for domestic hot water and electricity production

Hybrid photovoltaic/thermal (PV/T) solar systems provide a simultaneous conversion of solar radiation into electricity and heat. In these devices, the PV modules are mounted together with heat recovery units, by which a circulating fluid allows one to cool them down during their operation. An extensive study on water-cooled PV/T solar systems has been conducted at the University of Patras, where hybrid prototypes have been experimentally studied. In this paper the electrical and thermal efficiencies are given and the annual energy output under the weather conditions of Patras is calculated for horizontal and tilted building roof installation. In addition, the costs of all system parts are included and the cost payback time is estimated. Finally, the methodology of life cycle assessment (LCA) has been applied to perform an energy and environmental assessment of the analysed system. The goal of this study, carried out at the University of Rome ‘La Sapienza’ by means of SimaPro 5·1 software, was to verify the benefits of heat recovery. The concepts and results of this work on energy performance, economic aspects and LCA results of modified PV and water-cooled PV/T solar systems, give a clear idea of their application advantages. From the results, the most important conclusion is that PV/T systems are cost effective and of better environmental impact compared with standard PV modules. Copyright © 2005 John Wiley & Sons, Ltd.

https://onlinelibrary.wiley.com/doi/pdf/10.1002/pip.590

Energy, cost and LCA results of PV and hybrid PV/T solar systems

An alternative and cost-effective solution to building integrated PV systems is to use hybrid photovoltaic/thermal (PV/T) solar systems. These systems consist of PV modules with an air channel at their rear surface, where ambient air is circulating in the channel for PV cooling and the extracted heat can be used for building thermal needs. To increase the system thermal efficiency, additional glazing is necessary, but this results in the decrease of the PV module electrical output from the additional optical losses of the solar radiation. PV/T solar systems with air heat extraction have been extensively studied at the University of Patras. Prototypes in their standard form and also with low-cost modifications have been tested, aiming to achieve improved PV/T systems. An energetic and environmental assessment for the PV and PV/T systems tested has been performed by the University of Rome ‘La Sapienza’, implementing the specific software SimaPro 5·1 regarding the life-cycle assessment (LCA) methodology applied. In this paper electrical and thermal energy output results for PV and PV/T systems are given, focusing on their performance improvements and environmental impact, considering their construction and operation requirements. The new outcome of the study was that the glazed type PV/T systems present optimum performance regarding energy, cost and LCA results. Copyright © 2005 John Wiley & Sons, Ltd.

https://www.onlinelibrary.wiley.com/doi/pdf/10.1002/pip.634

A. Corrado

Papers

Energy, cost and LCA results of PV and hybrid PV/T solar systems

Performance, cost and life‐cycle assessment study of hybrid PVT/AIR solar systems