Additive manufacturing of metallic components – Process, structure and properties

This paper reviews the state-of-the-art of an important, rapidly emerging, manufacturing technology that is alternatively called additive manufacturing (AM), direct digital manufacturing, free form fabrication, or 3D printing, etc. A broad contextual overview of metallic AM is provided. AM has the potential to revolutionize the global parts manufacturing and logistics landscape. It enables distributed manufacturing and the productions of parts-on-demand while offering the potential to reduce cost, energy consumption, and carbon footprint. This paper explores the material science, processes, and business consideration associated with achieving these performance gains. It is concluded that a paradigm shift is required in order to fully exploit AM potential.

/pdf/metal-additive-manufacturing-a-review-lwo0wxslqj.pdf

Metal Additive Manufacturing: A Review

https://docs.lib.purdue.edu/cgi/viewcontent.cgi?article=1037&context=mepubs

Additive manufacturing of Ti6Al4V alloy: A review

This article reviews published data on the mechanical properties of additively manufactured metallic materials. The additive manufacturing techniques utilized to generate samples covered in this review include powder bed fusion (e.g., EBM, SLM, DMLS) and directed energy deposition (e.g., LENS, EBF3). Although only a limited number of metallic alloy systems are currently available for additive manufacturing (e.g., Ti-6Al-4V, TiAl, stainless steel, Inconel 625/718, and Al-Si-10Mg), the bulk of the published mechanical properties information has been generated on Ti-6Al-4V. However, summary tables for published mechanical properties and/or key figures are included for each of the alloys listed above, grouped by the additive technique used to generate the data. Published values for mechanical properties obtained from hardness, tension/compression, fracture toughness, fatigue crack growth, and high cycle fatigue are included for as-built, heat-treated, and/or HIP conditions, when available. The effects of test...

Metal Additive Manufacturing: A Review of Mechanical Properties

https://cmapspublic3.ihmc.us/rid=1P89G039W-1JGLLQJ-17GJ/DED%20Properties.pdf

Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing

The room temperature tensile properties of Ti-6Al-4V alloy prepared under two different processing routes were evaluated and compared. One group of samples was prepared by conventional casting-forging-rolling into flat plates. The other group was prepared by using Triton’s Laser Free-Form Fabrication (LF3)™ processes, i.e., a laser was used to melt pre-alloyed powders of the required metallic composition as they were dropped onto a moveable substrate programmed to move in such a manner as to form a solid alloy plate. Five populations of Ti-6Al-4V were evaluated: a standard wrought form, an as-deposited form, a machined as-deposited form, a heat-treated as-deposited form, and a machined as-deposited and heat-treated form. The poorest mechanical properties occurred with the rough surfaces, likely due to existing microcracks and stress concentrations. The LF3™ as-deposited material had mechanical properties comparable to, if not higher than, the mechanical properties of the wrought material. Further evaluations of the laser-formed material for complex spacecraft piece parts were warranted, specifically in regards to improving the surface finish of the materials.

/pdf/tensile-properties-and-microstructures-of-laser-formed-ti-5gl5ji7p55.pdf

A. Enriquez

Papers

Tensile Properties and Microstructures of Laser-Formed Ti-6Al-4V

The effect of thermal history on the color of oxide layers in titanium 6242 alloy