Fast Fourier Transform

An accelerated viscoelastic characterization procedure for use with polymer-based composite materials is presented which employs short term test data obtained using unidirectional specimens to predict the long term viscoelastic behavior of general composite laminates. This procedure is here illustrated using the Schapery (1966, 1969) nonlinear theory as the required viscoelastic constitutive model, as well as classical lamination theory for the lamination scheme. The technique is applied to T300/5208 graphite/epoxy.

Prediction of the long-term creep compliance of general composite laminates

A coaxial cable sensor device with periodic impedance discontinuities along the length of its cable. The cable comprises an inner conductor, insulating material disposed around the length of the inner conductor, and an outer conductor disposed around the insulating material. The periodic impedance discontinuities are created by physical deformations or material alterations to at least one of the inner conductor, the outer conductor, and the insulating material. The sensor device may be used to measure temperature, pressure, strain, and acoustic waves in building structures, and is well suited for down-hole or underwater applications.

Coaxial cable bragg grating sensor

The grid method is a technique suitable for the measurement of in-plane displacement and strain components on specimens undergoing a small deformation. It relies on a regular marking of the surfaces under investigation. Various techniques are proposed in the literature to retrieve these sought quantities from images of regular markings, but recent advances show that techniques developed initially to process fringe patterns lead to the best results. The grid method features a good compromise between measurement resolution and spatial resolution, thus making it an efficient tool to characterise strain gradients. Another advantage of this technique is the ability to establish closed-form expressions between its main metrological characteristics, thus enabling to predict them within certain limits. In this context, the objective of this paper is to give the state of the art in the grid method, the information being currently spread out in the literature. We propose first to recall various techniques that were used in the past to process grid images, to focus progressively on the one that is the most used in recent examples: the windowed Fourier transform. From a practical point of view, surfaces under investigation must be marked with grids, so the techniques available to mark specimens with grids are presented. Then we gather the information available in the recent literature to synthesise the connection between three important characteristics of full-field measurement techniques: the spatial resolution, the measurement resolution and the measurement bias. Some practical information is then offered to help the readers who discover this technique to start using it. In particular, programmes used here to process the grid images are offered to the readers on a dedicated website. We finally present some recent examples available in the literature to highlight the effectiveness of the grid method for in-plane displacement and strain measurement in real situations.

/pdf/the-grid-method-for-in-plane-displacement-and-strain-19w07norsx.pdf

The Grid Method for In‐plane Displacement and Strain Measurement: A Review and Analysis

Digitally whole-field analysis of isoclinic parameter in photoelasticity by four-step color phase-shifting technique

Non-contact and non-disturbing local strain measurement methods. I: Principle

The authors show a nondestructive method for obtaining the isochromatic and isoclinic fringes in a three-dimensional photoelastic specimen. The basic idea is to delimit a slice between two plane laser beams. The properties of polarization of the scattered light (Rayleigh's law) and the interference possibilities of the diffused beams are used. By introducing speckle pattern properties, the correlation factor of the two scattered beams is similar to the illumination given in a plane polariscope for the investigation of a slice (in a classical frozen-stress technique). The authors use a monochromatic laser beam, a CCD camera and a personal computer. Because they cannot obtain the correlation factor directly, they do a statistical analysis of the speckle patterns. The variance (function of the correlation factor) is computed from the light intensities of three images corresponding to the speckle pattern for plane 1 alone, plane 2 alone, and both planes together.

Photoelastic analysis of a three-dimensional specimen by optical slicing and digital image processing

A new method for the whole-field determination of the isoclinic angle α and the isochromatic parameter ϕ is presented. The problems appearing during the calculation of these two parameters are solved with the use of two different wavelengths. Indeed, when a monochromatic light is used as an incident light, α is not measurable at the points where ϕ is equal to 2kπ. In this method, each monochromatic light can compensate for the influence of ϕ to obtain the isoclinic angle for the entire model. Also, most of the methods calculate the fractional fringe order that is unwrapped afterward to obtain the isochromatic parameter. This unwrapping process needs an initialization, which cannot be automatic with only one isochromatic fringe pattern. The use of two wavelengths permits a complete automatic unwrapping of the isochromatic parameter, even for the initialization of the process.

A. Lagarde

Papers

Non-contact and non-disturbing local strain measurement methods. I: Principle

Photoelastic analysis of a three-dimensional specimen by optical slicing and digital image processing

Two-wavelength method for full-field automated photoelasticity

Whole field determination of isoclinic and isochromatic parameters

Numerical spectral analysis of a grid: Application to strain measurements