Electromagnetic interference shielding effectiveness of carbon materials

The growth in the application of electronic devices across a broad spectrum of military, industrial, commercial and consumer sectors has created a new form of pollution known as noise or radio frequency interference (RFI) or electromagnetic radiation or electromagnetic interference (EMI) that can cause interference or malfunctioning of equipment. Therefore, there is a greater need for the effective shielding of components from its adverse effects. This review surveys the shielding materials like metals, conducting plastics and conducting polymers for the control of electromagnetic radiations. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009

/pdf/emi-shielding-methods-and-materials-a-review-2g4jq2lljs.pdf

EMI shielding: Methods and materials—A review

Materials for the electromagnetic interference (EMI) shielding of electronics and radiation sources are reviewed, with emphasis on composite materials and resilient EMI gasket materials, which shield mainly by reflection of the radiation at a high frequency.

Materials for electromagnetic interference shielding

The rapid proliferation and elevated usage of electronic devices have led to a meteoritic rise in electronic pollutions such as electronic noise, electromagnetic interference (EMI) and radiofrequency interference (RFI) which leads to improper functioning of electronic devices. Metals and their alloys can serve as the best EMI shielding materials but their heavy weight, high cost and low corrosion resistance have limited their applications in EMI shielding. The emergence of flexible polymer composites have substituted the metal and metal alloy based EMI shielding materials due to their unique features such as light weight, excellent corrosion resistance, superior electrical, dielectric, thermal, mechanical and magnetic properties that are highly useful for suppressing the electromagnetic noises. In this review article, the EMI shielding effectiveness of flexible polymer composites comprising of metals and various forms of carbon nanofillers such as carbon black, carbon nanofibers, carbon nanotubes, graphite, graphene, graphene oxide, graphene nanosheets, graphene nanoribbons and graphene nanoplatelets have been deeply reviewed.

Recent advances in electromagnetic interference shielding properties of metal and carbon filler reinforced flexible polymer composites: A review

Electromagnetic interference (EMI) shielding characteristics of natural rubber and ethylene vinyl acetate filled with conductive carbon black (Vulcan XC-72) and short carbon fibre (SCF) have been studied. The measurements of shielding effectiveness (SE) were carried out in two different frequency ranges 100–2000 MHz and 8–12 GHz (X-band range). The return loss and loss due to absorption were also measured as a function of frequency in the X-band range and microwave region. It is observed that the SE of the composites is frequency dependent, especially at higher frequency range, and it increases with the increasing frequency. The SE also increases with the increase in filler loading. The SCF filled composites show higher SE compared to that of conductive carbon black. The correlation between SE and conductivity of the various composites is also discussed. The results indicate that the composites having higher fibre loading (≥20 phr) can be used for the purpose of EMI shielding, as well as for some microwave applications.

Electromagnetic interference shielding effectiveness of carbon black and carbon fibre filled EVA and NR based composites

This paper reports results on the electrical properties of laminated epoxy composite containing 25 layers of carbon fibers in the form of mats. The dependence of the activation energy (calculated from DC resistivity measurements) on temperature reveals two independent conduction processes. The AC impedance is independent of the applied frequency below 75°C, and the real componet of the dielectric constant is also independent of temperature at high frequencies. The determined shielding effectiveness is dominated by the insertion loss. The observed optimum shielding effectiveness occurs at 30 mm spacing and applied frequency 9 GHz.

Electrical and electromagnetic shielding behavior of laminated epoxy–carbon fiber composite

Optical and thermal properties of poly(ethylene oxide) doped with MnCl2 salt

This paper deals with the measurements of the equivalent impedance, insertion loss (IL), and return loss (RL) of a conductive composite material called “Magnex DC”, performed at microwave frequencies. It is found that the equivalent impedance of this composite material decreases as the frequency increases in the X-band (8–12.4 GHZ) and the IL of a 1.4 mm thick specimen is greater than 9 dB over the whole band. The utilization of this material in electromagnetic shielding is considered. Furthermore, results of the measurements performed on a tapered specimen are also reported.

Measurements of the Magnex DC characteristics at microwave frequencies

Optical properties of epoxy-glass microballoons composite

A microwave bench operating in the frequency range 8–12 GHz (X-band) was used to investigate some of the electrical characteristics of the talc filled polypropylene composite. The impedance, return loss, and insertion loss are measured as a function of frequency in the X-band range. It was found that electromagnetic waves interact with the material via the impurities, inclusions and voids existing in the bulk composite. The impedance, return loss and insertion loss show relatively low frequency dependence. Also, the return loss and the impedance exhibit a resonance behaviour at 11.91 GHz. The results suggest that this composite material could be used in some microwave applications.

A. M. Zihlif

Papers

Electrical and electromagnetic shielding behavior of laminated epoxy–carbon fiber composite

Optical and thermal properties of poly(ethylene oxide) doped with MnCl2 salt

Measurements of the Magnex DC characteristics at microwave frequencies

Optical properties of epoxy-glass microballoons composite

Microwave properties of the talc filled polypropylene