Recent worldwide interest in building a decentralized, hydrogen-based energy economy has refocused attention on the solid oxide fuel cell (SOFC) as a potential source of efficient, environmentally friendly, fuel-versatile electric power. Due to its high operating temperature, the SOFC offers several potential advantages over polymer-based fuel cells, including reversible electrode reactions, low internal resistance, high tolerance to typical catalyst poisons, production of high-quality waste heat for (among other uses) reformation of hydrocarbon fuels, as well as the possibility of burning hydrocarbon fuels directly. Today, SOFCs are much closer to commercial reality than they were 20 years ago, due largely to technological advances in electrode material composition, microstructure control, thin-film ceramic fabrication, and stack and system design. These advances have led to dozens of active SOFC development programs in both stationary and mobile power and contributed to commercialization or development in a number of related technologies, including gas sensors,1 solid-state electrolysis devices,2 and iontransport membranes for gas separation and partial oxidation.3 Many reviews are available which summarize the technological advances made in SOFCs over the last 15-35 yearssreaders who are primarily interested in knowing the state-of-the art in materials, design, and fabrication (including the electrodes) are encouraged to consult these reviews.4-12 This review focuses on the factors governing SOFC cathode performancesadvances we have made over † Dedicated to Brian Steele, 1929-2003. Researcher, Entrepreneur, Consensus Seeker. 4791 Chem. Rev. 2004, 104, 4791−4843

Factors Governing Oxygen Reduction in Solid Oxide Fuel Cell Cathodes

In the laser treatment of a workpiece (9), e.g. for surface hardening, melting, alloying, cladding, welding or cutting, the adverse effect of reflectivity of the surface, when a pure, monochromatic laser (6) is used, is remedied by the simultaneous application of a relatively shorter wavelength beam (1). The two beams (1)(5) may be combined by a beam coupler (4) or may reach the workpiece (9) by separate optical paths (not shown). The shorter wavelength beam (1) improves the coupling efficiency of the higher- powered laser beam (5).

Laser Material Processing

Model-free and model-fitting approaches to kinetic analysis of isothermal and nonisothermal data

Engineered nanomaterials (ENMs) are now becoming a significant fraction of the material flows in the global economy. We are already reaping the benefits of improved energy efficiency, material use reduction, and better performance in many existing and new applications that have been enabled by these technological advances. As ENMs pervade the global economy, however, it becomes important to understand their environmental implications. As a first step, we combined ENM market information and material flow modeling to produce the first global assessment of the likely ENM emissions to the environment and landfills. The top ten most produced ENMs by mass were analyzed in a dozen major applications. Emissions during the manufacturing, use, and disposal stages were estimated, including intermediate steps through wastewater treatment plants and waste incineration plants. In 2010, silica, titania, alumina, and iron and zinc oxides dominate the ENM market in terms of mass flow through the global economy, used mostly in coatings/paints/pigments, electronics and optics, cosmetics, energy and environmental applications, and as catalysts. We estimate that 63–91 % of over 260,000–309,000 metric tons of global ENM production in 2010 ended up in landfills, with the balance released into soils (8–28 %), water bodies (0.4–7 %), and atmosphere (0.1–1.5 %). While there are considerable uncertainties in the estimates, the framework for estimating emissions can be easily improved as better data become available. The material flow estimates can be used to quantify emissions at the local level, as inputs for fate and transport models to estimate concentrations in different environmental compartments.

Global life cycle releases of engineered nanomaterials

Progress in material selection for solid oxide fuel cell technology: A review

This book explains the fundamentals of high temperature corrosion and oxidation. It will enable engineers and other technical personnel to understand: How quickly different metals react with different environments at high temperatures; The mechanisms of these reactions; The corrosivity of different environments; How to control reactions or how to protect metals from degradation; How to select the best materials for specific high temperature applications. Introduction to High Temperature Corrosion and Oxidation will be a great asset for workers in the chemical, petrochemical, electric power generation, and related industries. It is also an excellent textbook for graduate and postgraduate courses on high temperature corrosion. Contents: High Temperature Corrosion: Basics Defects in Metal Oxides Diffusion in Oxides Thin Layer Oxidation Thick Layer Oxidation: WagnerAs Theory Oxidation of Pure Metals Oxidation of Alloys Oxidation in Mixed Environments Hot Corrosion Spallation of Oxides Active Element Effect High Temperature Coatings Electron Optical Techniques for Scale Characterization Application of High Temperature Oxidation Appendices Index

Introduction to High Temperature Oxidation and Corrosion

The present study demonstrates an effect of nano-ZnO particles on the growth of plant seedlings of mung (Vigna radiate) and gram (Cicer arietinum). The study was carried out in plant agar media to prevent precipitation of water-insoluble nanoparticles in the test units. Various concentrations of nano-ZnO particles in suspension form were introduced to the agar media, and their effect on the root and shoot growth of the seedlings was examined. The main experimental approach, using correlative light and scanning electron microscopy provided evidence of adsorption of nanoparticles on the root surface. Absorption of nanoparticles by seedlings root was also detected by inductive coupled plasma/atomic emission spectroscopy (ICP-AES). It was found that at certain optimum concentration, the seedlings displayed good growth over control, and beyond that, retardation in growth was observed.

https://downloads.hindawi.com/journals/jnt/2011/696535.pdf

Effect of Nano-ZnO Particle Suspension on Growth of Mung (Vigna radiata) and Gram (Cicer arietinum) Seedlings Using Plant Agar Method

“Effect of nano-ZnO particles on the corrosion behavior of alkyd-based waterborne coatings”

Fire is a serious threat to people and the structures they build. There is a continuous development of newer methods and materials to prevent its effects on them. Nowadays, a lot of attention is being paid in the design of public and commercial buildings by incorporating fire safety. Passive fireproofing of high-rise structures has become very important due to the use of steel in load bearing mode and has attracted increased attention after the collapse of the WTC towers. Conventional passive fireproofing materials include concrete covering, gypsum board and cementitious coatings which have a poor aesthetic. Intumescent fire-resistive coatings are a newer type of passive fireproofing coatings usually applied as thin film and they swell many times their original thickness forming an insulating char which acts as a barrier between the fire and the structural steel. It prevents the temperatures of the steel members from reaching a critical value and helps in maintaining the integrity of the structure in fire event. They are the preferred choice for passive fire protection of load bearing steel frame structures of architects and designers as they offer aesthetic appearance, flexibility, speed of application, and ease of inspection and maintenance. The present review covers recent developments in the field of intumescent coatings with a major emphasis on organic intumescent coatings. The role of various ingredients, their interactions in intumescent coatings, effects of various pigments, binders and additives are discussed briefly.

https://link.springer.com/content/pdf/10.1007%2Fs11998-016-9815-3.pdf

Intumescent coatings: A review on recent progress

The present experimental investigation demonstrates the effect of nano-ZnO, nano-FeO and nano-ZnCuFe-oxide particles on the growth of mung ( Vigna radiata ) seedling. The study was carried out by spraying optimum concentrations of nanoparticles in suspension form on hydroponically grown test units and examining the effect on the shoot growth of seedlings. Based on biomass assay, it was found that the seedlings displayed good growth over control, demonstrating a positive effect of the nanoparticle treatment. The best performance was observed for nano-ZnCuFe-Oxide followed by nano-FeO and nano-ZnO. Absorption of nanoparticles by plant leaves was also detected by inductive coupled plasma/atomic emission spectroscopy.

/pdf/effect-of-nanoparticles-suspension-on-the-growth-of-mung-luzym33xsn.pdf

A.S. Khanna

Papers

Introduction to High Temperature Oxidation and Corrosion

Effect of Nano-ZnO Particle Suspension on Growth of Mung (Vigna radiata) and Gram (Cicer arietinum) Seedlings Using Plant Agar Method

“Effect of nano-ZnO particles on the corrosion behavior of alkyd-based waterborne coatings”

Intumescent coatings: A review on recent progress

Effect of nanoparticles suspension on the growth of mung (Vigna radiata) seedlings by foliar spray method