[Liu, Chang; Li, Feng; Ma, Lai-Peng; Cheng, Hui-Ming] Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, Shenyang 110016, Peoples R China.;Cheng, HM (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, 72 Wenhua Rd, Shenyang 110016, Peoples R China;cheng@imr.ac.cn

Advanced Materials for Energy Storage

This paper reviews the development of latent heat thermal energy storage systems studied detailing various phase change materials (PCMs) investigated over the last three decades, the heat transfer and enhancement techniques employed in PCMs to effectively charge and discharge latent heat energy and the formulation of the phase change problem. It also examines the geometry and configurations of PCM containers and a series of numerical and experimental tests undertaken to assess the effects of parameters such as the inlet temperature and the mass flow rate of the heat transfer fluid (HTF). It is concluded that most of the phase change problems have been carried out at temperature ranges between 0 °C and 60 °C suitable for domestic heating applications. In terms of problem formulation, the common approach has been the use of enthalpy formulation. Heat transfer in the phase change problem was previously formulated using pure conduction approach but the problem has moved to a different level of complexity with added convection in the melt being accounted for. There is no standard method (such as British Standards or EU standards) developed to test for PCMs, making it difficult for comparison to be made to assess the suitability of PCMs to particular applications. A unified platform such as British Standards, EU standards needs to be developed to ensure same or similar procedure and analysis (performance curves) to allow comparison and knowledge gained from one test to be applied to another.

A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS)

The continuous increase in the level of greenhouse gas emissions and the climb in fuel prices are the main driving forces behind efforts to more effectively utilise various sources of renewable energy. In many parts of the world, direct solar radiation is considered to be one of the most prospective sources of energy. However, the large-scale utilisation of this form of energy is possible only if the effective technology for its storage can be developed with acceptable capital and running costs. One of prospective techniques of storing solar energy is the application of phase change materials (PCMs). Unfortunately, prior to the large-scale practical application of this technology, it is necessary to resolve numerous problems at the research and development stage. This paper looks at the current state of research in this particular field, with the main focus being on the assessment of the thermal properties of various PCMs, methods of heat transfer enhancement and design configurations of heat storage facilities to be used as a part of solar passive and active space heating systems, greenhouses and solar cooking.

Solar energy storage using phase change materials

http://www.celsius.co.kr/phase_change_materials/download/energy/Phase_Change_Materials_for_Smart_Textiles.pdf

Phase change materials for smart textiles – An overview

The development of energy saving technologies is very actual issue of present day. One of perspective directions in developing these technologies is the thermal energy storage in various industry branches. The review considers the modern state of art in investigations and developments of high-temperature phase change materials perspective for storage thermal and a solar energy in the range of temperatures from 120 to 1000 °C. The considerable quantity of mixes and compositions on the basis of fluorides, chlorides, hydroxides, nitrates, carbonates, vanadates, molybdates and other salts, and also metal alloys is given. Thermophysical properties of potential heat storage salt compositions and metal alloys are presented. Compatibility of heat storage materials (HSM) and constructional materials have found its reflection in the present work. Data on long-term characteristics of some HSMs in the course of repeated cycles of fusion and solidification are analyzed. Article considers also other problems which should be solved for creation of commercial high-temperature heat storage devices with use of phase change materials.

High-temperature phase change materials for thermal energy storage

Recent literatures in the field of cold thermal energy storage (CTES) are reviewed. First, the concept of the CTES is explained. Examples of load leveling of electrical energy in various countries are presented. Various types of the CTES are defined and compared as for their merits and demerits. The compared systems are a cold water storage vs. an ice-making storage, a static ice-making storage vs. a dynamic ice-making storage, and direct ice-making vs. indirect ice-making. Approximately 140 papers are reviewed and divided into five categories: (1) performance of successful systems, (2) simulation and control, (3) cold water storage, (4) static ice-making storage, and (5) dynamic ice-making storage. Finally, suggestions for future research are provided.

Recent advances in research on cold thermal energy storage

In order to clarify effects of electric charge on freezing of supercooled water, experiments were carried out with various kinds of electrodes in supercooled water. Water sample was kept in a test tube and cooled down at a constant cooling rate. When the water sample was maintained under a supercooling state, an electric charge was applied to the water sample with a small electric current. The degree of supercooling was measured continuously. Then the degree of supercooling at freezing was determined. Six kinds of materials were used for electrodes. Those materials were Aluminum, Copper, Argentum, Aurum, Platinum and Carbon. It was found that the effects of electric charge were distinct according to the material used for electrodes. The degree of supercooling at freezing was the lowest in the case of Aluminum. On the other hand, the highest value of the degree of supercooling at freezing was obtained in the case of carbon. The reason for the difference in the degree of supercooling at freezing by six materials was discussed.

Effects of electrode materials on freezing of supercooled water in electric freeze control

Study on the crystal growth of ice in water-ethyleneglycol solution was carried out, experimentally. The ice crystal, which was seeded on top of the capillary tube, propagated inside the tube slowly and began to grow freely at the tip of the tube in subcooled solution. The outer diameter of the tip of the capillary tube was less than 0.1 mm, which was much smaller than that of other researchers. Hence, considerable reduction of the influence of the existence of a capillary was accomplished and the initial growth of a single crystal was observed, precisely. Under the condition of subcooling of less than 8 K, the shape of the crystal was observed to be different from that of the one in pure water. The velocity of dendrite ice growth and the radius of the curvature of the tip were measured. It was found that after the dendrite ice developed to a certain size, the velocity of the dendritic growth and the radius of curvature were kept steady, and its values were dependent on the degree of subcooling and the concentration of the solution.

Ice crystal growth in supercooled solution

In this study, latent heat of fusion of ice in aqueous solutions was measured to understand latent heat of fusion of ice slurries. Propylene glycol, ethylene glycol, ethanol, NaCl and NaNO 3 solutions were used as aqueous solutions. For measurements, pure ice was placed into solution, and temperature variations of the solution due to melting of ice were measured. Effective latent heat of fusion was calculated using an energy balance equation. Concentration of the solution varied due to ice melting, and dilution heat was considered. Therefore, latent heat of fusion of ice in aqueous solutions was predicted by considering the effects of dilution and freezing-point depression. We found that effective latent heat of fusion of ice decreased with increasing concentration of the solution, and effective latent heat of fusion was derived from latent heat of fusion of pure ice, effects of freezing-point depression, and dilution heat.

Akio Saito

Papers

Recent advances in research on cold thermal energy storage

Effects of electrode materials on freezing of supercooled water in electric freeze control

Ice crystal growth in supercooled solution

Study on latent heat of fusion of ice in aqueous solutions

Study on Latent Heat of Fusion of Ice in Aqueous Solutions