Showing papers by "Aleksandra Drygała published in 2021"

Impact of TiO2 Nanostructures on Dye-Sensitized Solar Cells Performance.

Abstract: The effect of TiO2 nanostructures such as nanoparticles, nanowires, nanotubes on photoanode properties, and dye-sensitized solar cells photovoltaic parameters were studied. The series of dye-sensitized solar cells based on two dyes, that is, commercially N719 and synthesized 3,7′-bis(2-cyano-1-acrylic acid)-10-ethyl-phenothiazine were tested. Additionally, the devices containing a mixture of this sensitizer and chenodeoxycholic acid as co-adsorbent were fabricated. The amount of adsorbed dye molecules to TiO2 was evaluated. The prepared photoanodes with different TiO2 nanostructures were investigated using UV-Vis spectroscopy, optical, atomic force, and scanning electron microscopes. Photovoltaic response of constructed devices was examined based on current-voltage characteristics and electrochemical impedance spectroscopy measurements. It was found that the highest UV-Vis absorption exhibited the photoanode with nanotubes addition. This indicates the highest number of sensitizer molecules anchored to the titanium dioxide photoanode, which was subsequently confirmed by dye-loading tests. The highest power conversion efficiency was (6.97%) for solar cell containing nanotubes and a mixture of the dyes with a co-adsorbent.

Dye-Sensitized Solar Cell for Building-Integrated Photovoltaic (BIPV) Applications.

Abstract: One of the important research directions in the field of photovoltaics is integration with construction. The integration of solar cell systems with a building can reduce installation costs and help optimize the used space. Among the few literature reports on photovoltaic roof tiles, solutions with silicon and thin film solar cells dominate. An interesting solution may be the application of dye-sensitized solar cells. In addition to their interesting properties, they also have aesthetic value. In the classic arrangement, they are constructed using glass with a transparent conductive layer (TCL). This article describes replacing a classic glass counter electrode with an electrode based on a ceramic tile and nickel foil. First, a continuous and homogeneous fluorine-doped tin oxide (FTO) thin film was developed so that the above-mentioned substrate could be applied. The atomization method was used for this purpose. Then, nanocolloidal platinum paste was deposited as a catalytic material using the screen printing method. The electrical parameters of the manufactured DSSCs with and without a counter electrode tile were characterized by measuring their current–voltage characteristics under standard AM 1.5 radiation. A dye-sensitized solar cell integrated with ceramic tiles and nickel foil was produced and displayed an efficiency of over 4%. This solution makes it possible to expand their construction applications. The advantage of this solution is full integration with construction, while simultaneously generating electricity. A dye-sensitized solar cell was built layer-by-layer on a ceramic tile and nickel foil.