https://www.jpcomplex.ir/Content/media/image/2013/08/772_orig.pdf

Electrochemical technologies in wastewater treatment

Direct And Mediated Anodic Oxidation of Organic Pollutants

In recent years, new advanced oxidation processes based on the electrochemical technology, the so-called electrochemical advanced oxidation processes (EAOPs), have been developed for the prevention and remediation of environmental pollution, especially focusing on water streams. These methods are based on the electrochemical generation of a very powerful oxidizing agent, such as the hydroxyl radical (•OH) in solution, which is then able to destroy organics up to their mineralization. EAOPs include heterogeneous processes like anodic oxidation and photoelectrocatalysis methods, in which •OH are generated at the anode surface either electrochemically or photochemically, and homogeneous processes like electro-Fenton, photoelectro-Fenton, and sonoelectrolysis, in which •OH are produced in the bulk solution. This paper presents a general overview of the application of EAOPs on the removal of aqueous organic pollutants, first reviewing the most recent works and then looking to the future. A global perspective on the fundamentals and experimental setups is offered, and laboratory-scale and pilot-scale experiments are examined and discussed.

Electrochemical advanced oxidation processes: today and tomorrow. A review

In recent years, there has been increasing interest in finding innovative solutions for the efficient removal of contaminants from water, soil and air. The present tutorial review summarizes the results of an extensive selection of papers dealing with electrochemical oxidation, which is proposed as an alternative for treating polluted wastes. Both the direct and indirect approaches are considered, and the role of electrode materials is discussed together with that of other experimental parameters. Apart from discussing the possibility of removing selected contaminants from water using different anodes, efficiency rates for pollutant removal have been collected, the dependence of these rates on operational conditions advantages and disadvantages determining the further full-scale commercial application.

Electrochemical oxidation of organic pollutants for the wastewater treatment: direct and indirect processes

Increasing energy demands and environment awareness have promoted extensive research on the development of alternative energy conversion and storage technologies with high efficiency and environmental friendliness. Among them, water splitting is very appealing, and is receiving more and more attention. The critical challenge of this renewable-energy technology is to expedite the oxygen evolution reaction (OER) because of its slow kinetics and large overpotential. Therefore, developing efficient electrocatalysts with high catalytic activities is of great importance for high-performance water splitting. In the past few years, much effort has been devoted to the development of alternative OER electrocatalysts based on transition-metal elements that are low-cost, highly efficient, and have excellent stability. Here, recent progress on the design, synthesis, and application of OER electrocatalysts based on transition-metal elements, including Co, Ni, and Fe, is summarized, and some invigorating perspectives on the future developments are provided.

Transition-Metal (Co, Ni, and Fe)-Based Electrocatalysts for the Water Oxidation Reaction

Electrochemical oxidation of 2-chlorophenol was studied at Ti/PbO2 and Ti/SnO2 anodes. The performance of the electrodes was evaluated in terms of faradaic yield and fraction of toxic intermediates removed during the electrolysis. Results showed that, although similar average faradaic yields were obtained using Ti/PbO2 or Ti/SnO2 anodes, the latter material is preferred because of its better ability to oxidise toxic compounds. An effective electrochemical treatment (ηF≅50%) may be accomplished, in which electrolysis at Ti/SnO2 can be stopped when, in spite of a relatively high COD, only a small amount of easily biodegradable oxalic acid is present in the effluent.

https://link.springer.com/content/pdf/10.1023%2FA%3A1003411906212.pdf

On the performance of Ti/SnO2 and Ti/PbO2 anodesin electrochemical degradation of 2-chlorophenolfor wastewater treatment

Behavior of cobalt oxide electrodes during oxidative processes in alkaline medium

Characterization of a stirred tank electrochemical cell for water disinfection processes

This work investigates the performance of BDD electrodes during oxidation of aqueous solutions of phenol. The main reaction intermediates are identified, the effect of operating conditions on the faradic yield of the process, and the degree of mineralization achievable under different experimental conditions are evaluated. Due to the crucial role of mass transfer in the process, an impinging jet cell is used for the experiments. The results indicate that if a minimum value of current density is imposed, suitable initial conditions can be set at which the removal of the reactant is always under mass transfer control and the process is carried out at a faradic yield of about unity, up to the near-complete disappearance of total organic load. High current density and high mass transfer coefficient must be used in order to carry out the process with high space-time yield. The performance of BDD is compared to that obtained at Ti/RuO2 anodes.

Am Polcaro

Papers

On the performance of Ti/SnO2 and Ti/PbO2 anodesin electrochemical degradation of 2-chlorophenolfor wastewater treatment

Behavior of cobalt oxide electrodes during oxidative processes in alkaline medium

Characterization of a stirred tank electrochemical cell for water disinfection processes

Electrochemical treatment of wastewater containing phenolic compounds: oxidation at boron-doped diamond electrodes

Three-dimensional electrodes for the electrochemical combustion of organic pollutants