This critical review provides a processing-structure-property perspective on recent advances in cellulose nanoparticles and composites produced from them. It summarizes cellulose nanoparticles in terms of particle morphology, crystal structure, and properties. Also described are the self-assembly and rheological properties of cellulose nanoparticle suspensions. The methodology of composite processing and resulting properties are fully covered, with an emphasis on neat and high fraction cellulose composites. Additionally, advances in predictive modeling from molecular dynamic simulations of crystalline cellulose to the continuum modeling of composites made with such particles are reviewed (392 references).

/pdf/cellulose-nanomaterials-review-structure-properties-and-2z8x922p3v.pdf

Cellulose nanomaterials review: structure, properties and nanocomposites

The American Society for Testing and Materials (ASTM) is an independent organization devoted to the development of standards.

American Society for Testing and Materials

There have been a number of review papers on layered silicate and carbon nanotube reinforced polymer nanocomposites, in which the fillers have high aspect ratios. Particulate–polymer nanocomposites containing fillers with small aspect ratios are also an important class of polymer composites. However, they have been apparently overlooked. Thus, in this paper, detailed discussions on the effects of particle size, particle/matrix interface adhesion and particle loading on the stiffness, strength and toughness of such particulate–polymer composites are reviewed. To develop high performance particulate composites, it is necessary to have some basic understanding of the stiffening, strengthening and toughening mechanisms of these composites. A critical evaluation of published experimental results in comparison with theoretical models is given.

/pdf/effects-of-particle-size-particle-matrix-interface-adhesion-yv055zq7xi.pdf

Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites

In this study, the mechanical properties of epoxy nanocomposites with graphene platelets, single-walled carbon nanotubes, and multi-walled carbon nanotube additives were compared at a nanofiller weight fraction of 0.1 ± 0.002%. The mechanical properties measured were the Young’s modulus, ultimate tensile strength, fracture toughness, fracture energy, and the material’s resistance to fatigue crack propagation. The results indicate that graphene platelets significantly out-perform carbon nanotube additives. The Young’s modulus of the graphene nanocomposite was ∼31% greater than the pristine epoxy as compared to ∼3% increase for single-walled carbon nanotubes. The tensile strength of the baseline epoxy was enhanced by ∼40% with graphene platelets compared to ∼14% improvement for multi-walled carbon nanotubes. The mode I fracture toughness of the nanocomposite with graphene platelets showed ∼53% increase over the epoxy compared to ∼20% improvement for multi-walled carbon nanotubes. The fatigue resistance resu...

Enhanced mechanical properties of nanocomposites at low graphene content.

This paper provides an overview of recent progress made in the area of cellulose nanofibre-based nanocomposites. An introduction into the methods used to isolate cellulose nanofibres (nanowhiskers, nanofibrils) is given, with details of their structure. Following this, the article is split into sections dealing with processing and characterisation of cellulose nanocomposites and new developments in the area, with particular emphasis on applications. The types of cellulose nanofibres covered are those extracted from plants by acid hydrolysis (nanowhiskers), mechanical treatment and those that occur naturally (tunicate nanowhiskers) or under culturing conditions (bacterial cellulose nanofibrils). Research highlighted in the article are the use of cellulose nanowhiskers for shape memory nanocomposites, analysis of the interfacial properties of cellulose nanowhisker and nanofibril-based composites using Raman spectroscopy, switchable interfaces that mimic sea cucumbers, polymerisation from the surface of cellulose nanowhiskers by atom transfer radical polymerisation and ring opening polymerisation, and methods to analyse the dispersion of nanowhiskers. The applications and new advances covered in this review are the use of cellulose nanofibres to reinforce adhesives, to make optically transparent paper for electronic displays, to create DNA-hybrid materials, to generate hierarchical composites and for use in foams, aerogels and starch nanocomposites and the use of all-cellulose nanocomposites for enhanced coupling between matrix and fibre. A comprehensive coverage of the literature is given and some suggestions on where the field is likely to advance in the future are discussed.

/pdf/review-current-international-research-into-cellulose-vduhai1vrx.pdf

Review: current international research into cellulose nanofibres and nanocomposites

Toughening mechanisms of nanoparticle-modified epoxy polymers

/pdf/toughening-mechanisms-of-nanoparticle-modified-epoxy-1z0bclq5da.pdf

http://spiral.imperial.ac.uk/bitstream/10044/1/13970/2/Polymer_51_26_2010.pdf

The mechanisms and mechanics of the toughening of epoxy polymers modified with silica nanoparticles

The present paper investigates the effect of adding silica nanoparticles to an anhydride-cured epoxy polymer in bulk and when used as the matrix of carbon- and glass-fibre reinforced composites. The formation of ‘hybrid’ epoxy polymers, containing both silica nanoparticles and carboxyl-terminated butadiene-acrylonitrile (CTBN) rubber microparticles, is also discussed. The structure/property relationships are considered, with an emphasis on the toughness and the toughening mechanisms. The fracture energy of the bulk epoxy polymer was increased from 77 to 212 J/m2 by the presence of 20 wt% of silica nanoparticles. The observed toughening mechanisms that were operative were (a) plastic shear-yield bands, and (b) debonding of the matrix from the silica nanoparticles, followed by plastic void-growth of the epoxy. The largest increases in toughness observed were for the ‘hybrid’ materials. Here a maximum fracture energy of 965 J/m2 was measured for a ‘hybrid’ epoxy polymer containing 9 wt% and 15 wt% of the rubber microparticles and silica nanoparticles, respectively. Most noteworthy was the observation that these increases in the toughness of the bulk polymers were found to be transferred to the fibre composites. Indeed, the interlaminar fracture energies for the fibre-composite materials were increased even further by a fibre-bridging toughening mechanism. The present work also extends an existing model to predict the toughening effect of the nanoparticles in a thermoset polymer. There was excellent agreement between the predictions and the experimental data for the epoxy containing the silica nanoparticles, and for epoxy polymers containing micrometre-sized glass particles. The latter, relatively large, glass particles were investigated to establish whether a ‘nano-effect’, with respect to increasing the toughness of the epoxy bulk polymers, did indeed exist.

/pdf/the-toughness-of-epoxy-polymers-and-fibre-composites-69lv6xkqa7.pdf

The toughness of epoxy polymers and fibre composites modified with rubber microparticles and silica nanoparticles

The substantial increase in toughness achieved when nano-SiO2 particles were dispersed in a hot-cured single-part epoxy polymer was investigated. The synergistic effect of having a multiphase structure is based upon both nano-SiO2 and rubbery particles. The modulus, of the rubber-particulate epoxy polymer increases steadily as the wt.% of the silica nanophase was increased. The results suggested that the volume fraction of the rubbery-particulate phase which was formed was independent of the concentration of the nano-silicate phase present.

/pdf/the-effect-of-silica-nano-particles-and-rubber-particles-on-5bwr6xlm2y.pdf

Ambrose C. Taylor

Papers

Toughening mechanisms of nanoparticle-modified epoxy polymers

Toughening mechanisms of nanoparticle-modified epoxy polymers

The mechanisms and mechanics of the toughening of epoxy polymers modified with silica nanoparticles

The toughness of epoxy polymers and fibre composites modified with rubber microparticles and silica nanoparticles

The effect of silica nano particles and rubber particles on the toughness of multiphase thermosetting epoxy polymers