Groundworks for an evolutionary biochemistry: The iron-sulphur world

It is generally accepted that DNA appeared after RNA during the chemical evolution of life. To synthesize DNA, deoxyribonucleotides are required as building blocks. At present, these are formed from the corresponding ribonucleotides through the enzymatic action of ribonucleotide reductases. Three classes of enzymes are present in various organisms. There is little sequence similarity among the three classes of reductases. However, enzymic mechanisms and the allosteric behavior of the enzymes from various organisms are strongly conserved, suggesting that the enzymes might have evolved from a common ancestor, with the class III anaerobic Escherichia coli reductase as its closest relative.

https://science.sciencemag.org/content/sci/260/5115/1773.full.pdf

From RNA to DNA, why so many ribonucleotide reductases ?

ing a hydrogen atom from substrates with relatively weak X−H bonds (Figure 56). Such a situation was found in the catalytic cycle of ACCO, where cleavage of the N−H bond is facilitated by the ferrous ion capable of (partly) reducing the resulting N-based radical to an anion. In the catalytic cycle of HEPD and in the reaction of HppE with an enantiomer of the native substrate, a C−H bond at the carbon hosting a deprotonated alcohol group is severed by the superoxide. In these cases transfer of a hydrogen atom to the superoxide is coupled to one-electron reduction of Fe(III) to Fe(II), which yields aldehyde or ketone products. In a similar way a thioaldehyde is produced during the initial steps of the IPNS catalytic cycle. Figure 53. Reaction catalyzed by NDO. Figure 54. X-ray structure of the non-heme iron cofactor in the NDO active site (PDB 1O7G). Figure 55. Reaction mechanism for the dihydroxylation reaction catalyzed by NDO suggested on the basis of the results of a DFT study. Relative energy values in kilocalories per mole are given beneath the structures shown and above the arrows for the transition states connecting them. Chemical Reviews Review dx.doi.org/10.1021/cr400388t | Chem. Rev. 2014, 114, 3601−3658 3636 The most often encountered reaction of the Fe(III)−O2 species is an electrophilic attack on an electron-rich (co)substrate that yields an Fe(II) intermediate with a peroxide bridge between the ferrous ion and an organic molecule (Figure 57). In all examples shown in the figure the reactive spin state is a quintet with high-spin Fe(III) antiferromagnetically coupled to the superoxide radical. This particular electronic structure allows for a smooth two-electron reaction, leading to a ferrous intermediate featuring a high-spin Fe(II) ion, i.e., also lying on a quintet PES. When the substrates are easily one-electron-oxidized, as, for example, carotenoids or catecholates, already the ternary enzyme−dioxygen−organic substrate complex may contain an organic radical along with the superoxide anion stabilized by coordination to the metal (Figure 58). With proper (antiferromagnetic) alignment of the spins of the unpaired electrons on the two radicals, direct coupling between them proceeds with a straightforward formation of a new C−O bond. With the O2 ligand already protonated, several different reaction scenarios are usually plausible, and one of them, arguably the simplest, involves a transfer of the HOO group from the metal ion to the organic substrate (Figure 59). In the reaction of HEPD, it is the distal, i.e., originally protonated, oxygen atom that attacks the aldehyde group and the proton is transferred to the second (proximal) oxygen atom with the help of a phosphonic group of the substrate. In this reaction HOO acts as a nucleophile. In the case of HGD, the HOO ligand has a partial radical character, and hence, in its attack on the aromatic ring, it behaves as an electrophilic reagent. Moreover, in the HGD and ACO cases, it is the proximal oxygen atom that is directly transferred from the metal ion to the organic radical, i.e., the proton remains on the same oxygen atom throughout the reaction. When a catalytic reaction involves a homolytic O−O bond cleavage, one end of the peroxo group is in contact with the metal ion, and it is reduced to HO− or RO− when the O−O bond breaks (Figure 60). The electron required for the reduction is provided usually by the ferrous ion; in intradiol dioxygenases, which host Fe(III) in the active site, a tyrosinate ligand can serve as a reductant. Heterolytic cleavage of the O−O bond typically yields highvalent iron(IV)−oxo species, and such a reaction requires Fe(II), a deprotonated proximal oxygen atom, and usually also that the distal oxygen atom has a chance to develop a second covalent bond when the O−O gets broken (Figure 61). The bonding partner for the distal oxygen can be a hydrogen (PDHs, IPNS, ACCO) or a (co)substrate’s carbon (αKAOs, ACO, Dke1) atom. Heterolysis to Fe(IV)O usually proceeds on the quintet PES. Finally, heterolytic O−O bond cleavage may proceed without changing the oxidation state of the metal but instead with coupled two-electron oxidation of an organic substrate (Figure Figure 56. Examples of Fe(II)/Fe(III)−O2 reactions involving hydrogen atom abstraction. Only the most relevant fragment of the substrate is shown. Figure 57. Examples of Fe(III)−O2 reactions involving electrophilic attack and two-electron oxidation of an organic (co)substrate. Figure 58. Examples of Fe(II)/Fe(III)−O2 reactions involving radical coupling between the superoxide and an organic radical. Only the most relevant fragment of the substrate is shown. Chemical Reviews Review dx.doi.org/10.1021/cr400388t | Chem. Rev. 2014, 114, 3601−3658 3637 62). In both cases depicted in the figure, a hydroperoxo group is bound to high-spin Fe(III), and when theO−Obond cleaves, the OH group remains on iron and the other oxygen atom forms two covalent bonds with the organic substrate. This kind of heterolytic O−O cleavage requires that the donor orbital of the organic substrate, i.e., the one that provides two electrons for reduction of the peroxo group, has a good overlap with the O−O σ* orbital. 5.2. Dinuclear Non-Heme Iron Enzymes 5.2.1. Methane Monooxygenase. MMO is an enzyme which inserts one oxygen from O2 into methane to form methanol. The active site of the soluble form of MMO is shown in Figure 63. It contains an iron dimer complex linked by oxygen-derived ligands and has four glutamates and two histidines. Due to the presence of a well-resolved X-ray structure, and the technical importance of the reaction catalyzed, this was actually the first redox-active enzymemechanism that was treated with the cluster model using modern DFT functionals in 1997. Several groups were active at an early stage, and the most essential parts of the reaction mechanism were determined more than a decade ago. A comprehensive review of this development was written by Friesner et al. In short, the active species (compound Q) has a diamond core structure with two bridging oxo groups and is in an Fe2(IV,IV) state, one of themost oxidized species in nature. One of the oxo groups of compound Q activates nethane by an abstraction of one hydrogen atom. The TS is linear in C···H···O to form an Fe2(III,IV) state and amethyl radical. The loss of entropy at the TS is a large part of the barrier. In the second step, the methyl radical recombines with the bridging hydroxide formed in the first step. The TS for this step was first located by Basch et al. This rebound mechanism was criticized by interpretations of radical clock experiments, which appeared to show that there could not be a sufficiently long-lived alkyl radical to be consistent with a two-step mechanism. A concerted mechanism with simultaneous cleavage of the C−H bond and formation of the C−O bond was therefore suggested. Several explanations were suggested to resolve this apparent discrepancy between experiment and theory. In one of them, it was concluded that the radical clock probe molecules Figure 59. Examples of HOO transfer reactions. Only the most relevant fragment of the substrate is shown. Figure 60. Examples of O−O bond homolysis facilitated by oneelectron reduction of the proximal oxygen atom. Only the most relevant fragment of the substrate is shown. Figure 61. Examples of heterolytic O−O bond cleavage yielding iron(IV)−oxo species. Figure 62. Examples of heterolytic O−Obond cleavage proceeding with direct two-electron oxidation of the organic molecule. Chemical Reviews Review dx.doi.org/10.1021/cr400388t | Chem. Rev. 2014, 114, 3601−3658 3638 were chemically so different from methane that different mechanisms were likely. The probes are much easier to ionize and could form cations instead of radicals. Another suggestion was a so-called two-channel mechanism of the dynamics involving a bound radical intermediate. A third possibility could be something analogous to the two-state reactivity mechanism suggested for P450 to explain similar discrepancies in that case, but this has not been tested. In summary, a concerted mechanism, as suggested by the experiments, has never been found in DFT modeling calculations for methane hydroxylation by MMO, at least when reasonable models have been tried, and the suggestion has therefore not survived. In the initial phase of the MMO studies, there were problems converging to proper electronic states. These problems were solved by Friesner et al., who were able to obtain the correct antiferromagnetic coupling of compound Q with two high-spin irons. A state of key importance is also the first intermediate after Q, with an electronic structure characterized as Fe2(III,IV)− O•, discussed further below in connection with mixedMn−Fe dimers. It was found that already at the TS for hydrogen abstraction the iron dimer is in an Fe2(III,IV) state as it is in the product of this step. The bridging oxygen radical would then act as a hydrogen atom abstractor. At the TS, the spins are divided between a bridging oxo ligand and the methyl, while the iron spins stay essentially constant from the Fe2(III,IV)−O state to the product. The O−O bond cleavage to reach compound Q is also a significant step in the catalytic cycle. Again, several groups were involved in studying this step at an early stage. There was essential agreement among these studies on the mechanism. First, a peroxide (compound P) is formed between the two irons in an Fe2(III,III) state. Several different structures of P are nearly degenerate. In the TS for the O−O cleavage, the oxygens are symmetric, but only one of the irons is redox-active. In the final Figure 63. Active site of methane monooxygenase. Figure 64. R1 and R2 proteins in RNR. Chemical Reviews Review dx.doi.org/10.1021/cr400388t | Chem. Rev. 2014, 114, 3601−3658 3639 stage, the other iron also changes its oxidation state to IV, and compound Q is formed. In the study by Friesner et al., 

Quantum chemical studies of mechanisms for metalloenzymes.

Manganese carboxylate chemistry and its biological relevance

Magnetic assemblies based on Mn(III) salen analogues

Ribonucleotide reduction and not DNA replication is the site for the specific manganese requirement of DNA synthesis and cell growth in the coryneform bacterium Brevibacterium ammoniagenes. To characterize the metal effect we have isolated and purified ribonucleoside-diphosphate reductase from overproducing bacteria that were first deprived of and then reactivated by manganese ions. Purification on columns of Sephacryl S400, DEAE-cellulose and hydroxyapatite provided an apparently homogeneous enzyme consisting of two protein subunits. These were characterized by affinity chromatography on 2',5'-ADP-Sepharose as nucleotide-binding protein B1 (Mr = 80,000) and catalytic protein B2 (Mr = 100,000, composed of two Mr = 50,000 polypeptides), which were both necessary for activity. In vitro the purified enzyme does not require added metal ions except for an unspecific, twofold activity increase observed in the presence of Mg2+ and other divalent cations. Enzyme activity is inhibited by hydroxyurea (I50 = 2.5 mM). The electronic spectrum with maxima around 455 nm and 485 nm closely resembles that of manganese(III)-containing pseudocatalase and of oxo-bridged binuclear Mn(III) model complexes. Denaturation of the enzyme in trichloroacetic acid liberated an equimolar amount of Mn(II) which was detected by EPR spectroscopy. It was not possible to remove and reintroduce metal ions without loss of enzyme activity. Manganese-deficient cell cultures were also grown in the presence of 54MnCl2. Ribonucleotide reductase activity and radioactivity cochromatographed in several systems. Non-denaturing polyacrylamide gel electrophoresis showed that protein subunit B2 was specifically 54Mn-labeled. All these properties suggest that the ribonucleotide reductase of B. ammoniagenes is a manganese-containing analog of the non-heme-iron-containing reductases of Escherichia coli and eukaryotes.

Ribonucleotide reductase of Brevibacterium ammoniagenes is a manganese enzyme.

The manganese-containing ribonucleotide reductase previously identified in gram-positive bacteria has been purified and its nucleotide specificity and other requirements were determined. The enzyme isolated from Brevibacterium ammoniagenes is a ribonucleoside-diphosphate reductase which, in the presence of allosteric effectors, reduces all four common substrates at comparable rates; very little activity is observed in the absence of effector nucleotides. Ribonucleoside triphosphates are reduced at 20% the rate of the diphosphates. Cytidine and uridine nucleotide reduction is specifically stimulated by ATP and dATP, adenylate reduction by dGTP, and guanosine nucleotide reduction by dTTP. Unlike the iron-containing ribonucleotide reductase systems, high concentrations of dATP do not inhibit substrate reduction. The new bacterial enzyme tolerates high salt concentrations (up to 250 mM ionic strength) and does not require divalent metal ions for activity in vitro.



The presence of thioredoxin has been demonstrated in heat- and acid-treated protein extracts of B. ammoniagenes and the protein was purified to homogeneity. It is very similar to the thioredoxins isolated from other organisms in relative molecular mass (12000), isoelectric point (4.3) and enzyme-activating properties. In the presence of 0.3 mM dithiothreitol, the bacterial thioredoxin can serve as hydrogen donor for B. ammoniagenes ribonucleotide reductase in vitro, indicating the presence of a functional ribonucleotide reductase-thioredoxin system in these bacteria.



The properties described in this and in our preceding paper in this journal [Eur. J. Biochem. 170, 603–611 (1988)] suggest that the B. ammoniagenes ribonucleotide reductase is intermediate in structure and specificity between the deoxyadenosylcobalamin-dependent and the iron-containing enzyme classes and that it is adapted to the specific requirements of deoxyribonucleotide synthesis in this organism.

https://febs.onlinelibrary.wiley.com/doi/pdf/10.1111/j.1432-1033.1988.tb14179.x

Andreas Willing

Papers

Ribonucleotide reductase of Brevibacterium ammoniagenes is a manganese enzyme.

Nucleotide and thioredoxin specificity of the manganese ribonucleotide reductase from Brevibucterium ammoniagenes