Aminopolycarboxylates, like ethylenediaminetetraacetic acid (EDTA) and diethylenetriaminepentaacetic acid (DTPA), are chelating agents widely used in several industrial, agricultural, and domestic applications. However, the fact that they are not biodegradable leads to the presence of considerable amounts in aquatic systems, with serious environmental consequences. The replacement of these compounds by biodegradable alternatives has been the object of study in the last three decades. This paper reviews the most relevant studies towards the use of environmentally friendly chelating agents in a large number of applications: oxidative bleaching, detergents and cleaning compositions, scale prevention and reduction, remediation of soils, agriculture, electroplating, waste treatment, and biocides. Nitrilotriacetic acid (NTA), ethylenediaminedisuccinic acid (EDDS), and iminodisuccinic acid (IDS) are the most commonly suggested to replace the nonbiodegradable chelating agents. Depending on the application, the requirements for metal complexation might differ. Metal chelation ability of the most promising compounds [NTA, EDDS, IDS, methylglycinediacetic acid (MGDA), L-glutamic acid N,N-diacetic acid (GLDA), ethylenediamine-N,N'-diglutaric acid (EDDG), ethylenediamine-N,N'-dimalonic acid (EDDM), 3-hydroxy-2,2-iminodisuccinic acid (HIDS), 2-hydroxyethyliminodiacetic acid (HEIDA), pyridine-2,6-dicarboxylic acid (PDA)] with Fe, Mn, Cu, Pb, Cd, Zn, Ca, and Mg was simulated by computer calculations. The advantages or disadvantages of each compound for the most important applications were discussed.

Biodegradable chelating agents for industrial, domestic, and agricultural applications—a review

http://digital.csic.es/bitstream/10261/39899/3/2005-Ibarra-JAAP.pdf

Chemical characterization of residual lignins from eucalypt paper pulps

Consumption of chemicals during ECF bleaching of kraft pulp correlates reasonably well with kappa number, which measures with KMnO4 the total amount of oxidizable material in the pulp. However, the method does not distinguish between the oxidizable material in residual lignin and other structures susceptible to oxidation, such as hexenuronic acids (HexAs), extractives and carbonyl groups in the pulp. In this study an attempt is made to separate the main contributors to the kappa number in oxygen - delignified eucalyptus Kraft pulps and evaluate how these fractions behave during ECF bleaching using chlorine dioxide as the sole oxidant (DEDD sequence). Residual lignin and HexAs proved to be the main fractions contributing to the kappa number and chlorine dioxide consumption in ECF bleaching. Pulp bleachability with chlorine dioxide increases with increasing HexAs content of the pulp but chlorine dioxide per se does not react with HexAs. Reduction of pulp with sodium borohydride under conditions for removing carbonyl groups has no impact on bleachability. No correlation was found between the pulp of the extractive content and pulp bleachability. The removal of HexAs prior to ECF bleaching significantly decreases the formation of chlorinated organics in the pulp (OX) and filtrates (AOX) as well as of oxalic acids in the filtrates.

The impact of kappa number composition on eucalyptus kraft pulp bleachability

Paper is one of the most important inventions in the history of civilization, and it is an essential commodity to all people in the world. The fact that we make ubiquitous use of a score of paper products makes it easy to underestimate its value and significance. This review is intended to put into perspective the dispersion science involved in papermaking and to describe how our understanding of key processes has evolve since its conception, approximately 2000 years ago, from art to science. Paper is formed from a slurry of fibers and much smaller particles that are often called “fines” and other chemical additives. Ahead of the paper forming process the slurry is subjected to a series of steps, including treatment with polyionic species and passage through unit operations that impose shear forces on the papermaking suspension. These steps alternately disperse the solids apart or re‐gather them back together. The overall process is optimized to achieve a highly uniform product, while at the same...

/pdf/the-dispersion-science-of-papermaking-2uik7g95e1.pdf

The Dispersion Science of Papermaking

http://digital.csic.es/bitstream/10261/39898/3/2004-Ibarra-EMT-35-173.pdf

Isolation of high-purity residual lignins from eucalypt paper pulps by cellulase and proteinase treatments followed by solvent extraction

Formation of oxalic acid during bleaching of softwood kraft pulp was studied. The bleaching agents used were oxygen, hydrogen peroxide, chlorine dioxide, peracetic acid, and ozone. Formation of oxa ...

Oxalic acid formation during ECF and TCF bleaching of kraft pulp

The formation of oxalic acid (I) during bleaching of softwood kraft pulp was studied.  Bleaching agents used were O, H2O2, ClO2, peracetic acid (II), and O3.  The formation of I acid increased line ...

Anna Elsander

Papers

Oxalic acid formation during ECF and TCF bleaching of kraft pulp

Oxalic acid formation during ECF and TCF bleaching of kraft pulp