Sustainability is a key principle in natural resource management, and it involves operational efficiency, minimisation of environmental impact and socio-economic considerations; all of which are interdependent. It has become increasingly obvious that continued reliance on fossil fuel energy resources is unsustainable, owing to both depleting world reserves and the green house gas emissions associated with their use. Therefore, there are vigorous research initiatives aimed at developing alternative renewable and potentially carbon neutral solid, liquid and gaseous biofuels as alternative energy resources. However, alternate energy resources akin to first generation biofuels derived from terrestrial crops such as sugarcane, sugar beet, maize and rapeseed place an enormous strain on world food markets, contribute to water shortages and precipitate the destruction of the world's forests. Second generation biofuels derived from lignocellulosic agriculture and forest residues and from non-food crop feedstocks address some of the above problems; however there is concern over competing land use or required land use changes. Therefore, based on current knowledge and technology projections, third generation biofuels specifically derived from microalgae are considered to be a technically viable alternative energy resource that is devoid of the major drawbacks associated with first and second generation biofuels. Microalgae are photosynthetic microorganisms with simple growing requirements (light, sugars, CO 2 , N, P, and K) that can produce lipids, proteins and carbohydrates in large amounts over short periods of time. These products can be processed into both biofuels and valuable co-products. This study reviewed the technologies underpinning microalgae-to-biofuels systems, focusing on the biomass production, harvesting, conversion technologies, and the extraction of useful co-products. It also reviewed the synergistic coupling of microalgae propagation with carbon sequestration and wastewater treatment potential for mitigation of environmental impacts associated with energy conversion and utilisation. It was found that, whereas there are outstanding issues related to photosynthetic efficiencies and biomass output, microalgae-derived biofuels could progressively substitute a significant proportion of the fossil fuels required to meet the growing energy demand.

/pdf/biofuels-from-microalgae-a-review-of-technologies-for-1t1wwr5e69.pdf

Biofuels from microalgae—A review of technologies for production, processing, and extractions of biofuels and co-products

Thirty microalgal strains were screened in the laboratory for their biomass productivity and lipid content. Four strains (two marine and two freshwater), selected because robust, highly productive and with a relatively high lipid content, were cultivated under nitrogen deprivation in 0.6-L bubbled tubes. Only the two marine microalgae accumulated lipid under such conditions. One of them, the eustigmatophyte Nannochloropsis sp. FM102: 100–112. © 2008 Wiley Periodicals, Inc.

http://biodiesel.persiangig.com/Cultivation/(1)22033_ftp.pdf

Microalgae for oil: strain selection, induction of lipid synthesis and outdoor mass cultivation in a low-cost photobioreactor.

https://www.massey.ac.nz/~ychisti/EPA%20Review.pdf

Recovery of microalgal biomass and metabolites: process options and economics

Cultivation, photobioreactor design and harvesting of microalgae for biodiesel production: A critical review

Algal–bacterial processes for the treatment of hazardous contaminants: A review

Production of Spirulina biomass in closed photobioreactors

A photobioreactor in the form of a 245-m-long loop made of plexiglass tubes having an inner diameter of 2.6 cm was designed and constructed for outdoor culture of Spirulina. The loop was arranged in two planes, with 15 8-m-long tubes in each plane. In the upper plane, the tubes were placed in the vacant space between the ones of the lower plane. The culture recycle was performed either with two airlifts, one per plane, or with two peristaltic pumps. The power required for water recycle in the tubular photobioreactor, with a Reynolds number of 4000, was 3.93 x 10(-2) W m(-2). The photobioreactor contained 145 L of culture and covered an overall area of 7.8 m(2). The photobioreactor operation was computer controlled. Viscosity measurements performed on Spirulina cultures having different biomass concentrations showed non-Newtonian behavior displaying decreasing viscosity with an increasing shear rate. The performance of the two-plane photobioreactor was tested under the climatic conditions of central Italy (latitude 43.8 degrees N, longitude 11.3 degrees E). A biomass concentration of 3.5 g L(-1) was found to be adequate for outdoor culture of Spirulina. With a biomass concentration of 6.3 g L(-1), the biomass output rate significantly decreased. The net biomass output rate reached a mean value of 27.8 g m(-2) d(-1) in July; this corresponded to a net photosynthetic efficiency of 6.6% (based on visible irradiance).

A two-plane tubular photobioreactor for outdoor culture of Spirulina.

Cultivation of microalgae in closed photobioreactors suffers from high temperatures, whereas in open raceway ponds the optimal temperature is seldom reached. With an integrated device coupling a raceway pond with a suitably sized and positioned closed system (alveolar panel), the heat accumulated in the panel was efficiently transferred to the pond and a near-optimum temperature regimen for Arthrospira platensis was maintained, with no need for any additional cooling device. The productivity obtained in the integrated system was higher than the sum of the productivities (g reactor−1 day−1) of the pond and panel systems operating separately.

As integrated culture system for outdoor production of microalgae and cyanobacteria

In the past decade, considerable progress has been made in developing the appropriate biotechnology for microalgal mass cultivation aimed at establishing a new agro-industry. This review points out the main biological constraints affecting algal biotechnology outdoors and the requirements for making this biotechnology economically viable. One of them is the availability of a wide variety of algal species and improved strains that favorably respond to varying environmental conditions existing outdoors. It is thus just a matter of time and effort before a new methodology like genetic engineering can and will be applied in this field as well. The study of stress physiology and adaptation of microalgae has also an important application in further development of the biotechnology for mass culturing of microalgae. In outdoor cultures, cells are exposed to severe changes in light and temperature much faster than the time scale required for the cells to acclimate. A better understanding of those parameters and the ability to rapidly monitor those conditions will provide the growers with a better knowledge on how to optimize growth and productivity. Induction of accumulation of high value products is associated with stress conditions. Understanding the physiological response may help in providing a better production system for the desired product and, at a later stage, give an insight of the potential for genetic modification of desired strains. The potential use of microalgae as part of a biological system for bioremediation/detoxification and wastewater treatment is also associated with growing the cells under stress conditions. Important developments in monitoring and feedback control of the culture behavior through application of on-line chlorophyll fluorescence technique are in progress. Understanding the process associated with those unique environmental conditions may help in choosing the right culture conditions as well as selecting strains in order to improve the efficiency of the biological process.

https://link.springer.com/content/pdf/10.1007/BF02949277.pdf

Biological constraints in algal biotechnology

An inexpensive and simple solar device was constructed and monitored for drying microalgal biomass with 90% moisture content. The drier is capable of producing about 140g dry biomass per sq.m of collector area in 3–5 hours. The dried biomass contains less than 10% moisture and is biologically of good quality. The experiments are done with two microalgae - Spirulina and Scenedesmus.

Benjamin Pushparaj

Papers

Production of Spirulina biomass in closed photobioreactors

A two-plane tubular photobioreactor for outdoor culture of Spirulina.

As integrated culture system for outdoor production of microalgae and cyanobacteria

Biological constraints in algal biotechnology

Microalgal biomass drying by a simple solar device