Hazardous chemicals desk reference

Thank you for reading environmental engineering a design approach. As you may know, people have look numerous times for their favorite readings like this environmental engineering a design approach, but end up in harmful downloads. Rather than reading a good book with a cup of tea in the afternoon, instead they cope with some infectious bugs inside their laptop. environmental engineering a design approach is available in our digital library an online access to it is set as public so you can download it instantly. Our digital library hosts in multiple countries, allowing you to get the most less latency time to download any of our books like this one. Merely said, the environmental engineering a design approach is universally compatible with any devices to read.

Environmental Engineering A Design Approach

Water quality assessment in two lakes of Panchkula, Haryana, using GIS: case study on seasonal and depth wise variations

Water quality index (WQI) provides a single number that expresses the overall water quality, at a certain location and time, based on several water quality parameters. The objective of WQI is to turn complex water quality data into information that is understandable and usable by the public. A number of indices have been developed to summarize water quality data in an easily expressible and easily understood format. The WQI is basically a mathematical means of calculating a single value from multiple test results. This chapter discusses, in detail, the application of a water quality index for the assessment of water quality to different several water sources in Nigeria.

/pdf/application-of-water-quality-index-for-the-assessment-of-26qtxoyr5i.pdf

Application of Water Quality Index for the Assessment of Water from Different Sources in Nigeria

Aim: The Total Hydrocarbon Content (THC) levels in the leaves of three edible plants (Allium cepa, Telfairia occidentalis and Zea mays) grown on soil polluted with 100 ml of crude oil were examined. 
Study Design: This experiment was conducted in two groups where the soil samples were polluted before planting (PB) and polluted 2 weeks after planting (PA). 
Place and Duration of Study: The research was carried out at the Federal University of Technology, Owerri (FUTO), Imo State, Nigeria, within a period of 4 weeks based on each group’s pollution time. 
Methodology: The tests for total hydrocarbon content (THC) were analyzed at different wavelengths for polluted soil and leaf samples using UV-Vis spectrophotometric method. Soil THC tests were determined on days 0, 14 and 28 respectively while THC tests on leaves of study plants were assessed on day 14 and 28. 
Results: The total hydrocarbon content values of the unpolluted soil (UPS) and the non-planted polluted soil (PS) subjected to this analysis on day zero were (UPS = 96.38 mg/kg; PS = 1082.80 mg/kg). However, results obtained on day 14 and 28 showed significant difference (P < 0.05) between the unpolluted soil sample (UPS) and all the planted polluted soil for Telfairia occidentalis (TOPB, TOPA), Allium cepa (ACPB, ACPA), Zea mays (ZMPB, ZMPA) as well as, the non-planted polluted soil (PS). For the leaf samples, TOPB had the highest THC value of 14.47mg/kg and 36.73 mg/kg for day 14 and 28 respectively while ZMPB had the lowest value of 5.38mg/kg at day 14 and ZMPA, the least THC value of 7.76mg/kg at day 28. 
Conclusion: Based on the varying THC levels observed in the leaves of crops used for this study; it was connoted that, bioaccumulation of hydrocarbons depends on the plants phytoremediation capability and the mode of pollution as observed in TOPB.

Evaluation of Total Hydrocarbon Contents in the Leaves of Selected Crops Grown on Crude Oil Polluted Agricultural Soil

Water quality of different locations in River state, Nigeria was evaluated using Water Quality Index (WQI) approach to assess the suitability of water from three local government areas in Rivers State. The study revealed that WQI was determined by the following parameters: pH, Temp, EC, BOD, Chloride, Sulphate, Calcium, Magnesium, Phosphate, Total Hardness, Nitrate, Pb Calcium, Cd, Cu, and Fe. The result obtained indicated that the water quality index of borehole water exceeded the status of water quality in all sampling locations due to groundwater contamination, making the water unsafe for human and animal consumption. Residents within the State should be enlightened on the adverse effect of drinking polluted water and the need for water treatment before consumption.

https://www.ej-geo.org/index.php/ejgeo/article/download/101/53

Water Quality Index for the Assessment of Selected Borehole Water Quality in Rivers State

A field study was conducted to assess groundwater samples collected in close proximity to septic tanks and its potential impact on health. pH, Total Alkalinity, Total Hardness. TDS, BOD, Turbidity, EC, Magnesium, Phosphate, Sulphate, Chloride, Nitrate, Cu, Fe, Pb and Cd were determined using standard methods. The human health risk assessment was performed by determining the hazard quotient of physicochemical and heavy metals through human oral consumption. The results indicate that the hazard quotient for pH, Total Alkalinity, Total Hardness, TDS, BOD, Turbidity, EC, Magnesium, Phosphate, Sulphate, Chloride, Nitrate, Cu, Fe, Pb and Cd were less than 1 while Temperature (1.1, 1.1 and 1,1), Dissolved Oxygen [CE1(3.3), CE2(3.8) and CE3(3.7)] and Calcium [CE1 (0.0), CE2 (2.6), and CE3 (1.2)] except for CE1 were greater than 1. This indicates that the borehole water poses risk for human consumption. Regulatory agencies should be proactive in monitoring borehole water quality, agencies in charge of approving building plan should ensure a safe distance between borehole water and septic tank is maintained and enforced.

https://www.ej-geo.org/index.php/ejgeo/article/download/104/55

Assessment of Groundwater Quality in Close Proximity to Septic Tanks and Potential Impact on Health

Petroleum hydrocarbon contamination of soils has become a global concern, which is often caused by anthropogenic activities, posing serious threat to all living beings. The study for evaluation of the variability of crude oil on the physicochemical characteristics of sandy loam soil was conducted at demonstration farm, Rivers state university, Port-Harcourt, Nigeria. The Bonny light crude oil was obtained from an oil and gas production company. Uncontaminated soil was mixed with crude oil. Standard procedures were adopted for the laboratory analysis, the parameters analyzed include bulk density, total porosity, pH, available phosphorus (P), Total hydrocarbon content (THC), organic carbon, organic matter, exchangeable cation (Mg, K, Na, Ca), effective cation exchange capacity (ECEC), total exchangeable acidity (TEA), and base saturation were monitored for a period of 21 days. 10 kg of sandy loam soils were mixed with 100, 300, 500, and 700ml of crude oil while no crude oil serves as the control using plastic reactors. The reactor with 700ml of crude oil recorded the highest THC of 1734.33 mg/kg, followed by 500ml with a THC of 1601mg/kg while the control with no contamination recorded the least THC of 534.33mg/kg. However, the values of all concentrations did not meet 5000 mg/kg of Department of Petroleum Resources (2018) intervention value but exceeded the target value of 50 mg/kg. Other parameters followed same trend except porosity which decreased with increase in crude oil volume. There were significant differences at P&lt; 0.05 except for pH, available P, and base saturation. Therefore, this study calls for the utilization of its findings for adoption of remediation on crude oil contaminated soils. 

Bright Nweke

Papers

Water Quality Index for the Assessment of Selected Borehole Water Quality in Rivers State

Assessment of Groundwater Quality in Close Proximity to Septic Tanks and Potential Impact on Health

Evaluation of Simulated Petroleum Hydrocarbon on the Physicochemical Properties of Soil