Increased use of reconstruction procedures in orthopedics, due to trauma, tumor, deformity, degeneration and an aging population, has caused a blossom, not only in surgical advancement, but also in the development of bone implants. Traditional synthetic porous scaffolds are made of metals, polymers, ceramics or even composite biomaterials, in which the design does not consider the native structure and properties of cells and natural tissues. Thus, these synthetic scaffolds often poorly integrate with the cells and surrounding host tissue, thereby resulting in unsatisfactory surgical outcomes due to poor corrosion and wear, mechanical mismatch, unamiable surface environment, and other unfavorable properties. Musculoskeletal tissue reconstruction is the ultimate objective in orthopedic surgery. This objective can be achieved by (i) prosthesis or fixation device implantation, and (ii) tissue engineered bone scaffolds. These devices focus on the design of implants, regardless of the choice of new biomaterials. Indeed, metallic materials, e.g. 316L stainless steel, titanium alloys and cobalt chromium alloys, are predominantly used in bone surgeries, especially in the load-bearing zone of prostheses. The engineered scaffolds take biodegradability, cell biology, biomolecules and material mechanical properties into account, in which these features are ideally suited for bone tissue repair and regeneration. Therefore, the design of the scaffold is extremely important to the success of clinical outcomes in musculoskeletal surgeries. The ideal scaffolds should mimic the natural extracellular matrix (ECM) as much as possible, since the ECM found in natural tissues supports cell attachment, proliferation, and differentiation, indicating that scaffolds should consist of appropriate biochemistry and nano/micro-scale surface topographies, in order to formulate favorable binding sites to actively regulate and control cell and tissue behavior, while interacting with host cells. In addition, scaffolds should also possess a similar macro structure to what is found in natural bone. This feature may provide space for the growth of cells and new tissues, as well as for the carriers of growth factors. Another important concern is the mechanical properties of scaffolds. It has been reported that the mechanical features can significantly influence the osteointegration between implants and surrounding tissues, as well as cell behaviors. Since natural bone exhibits super-elastic biomechanical properties with a Young's modulus value in the range of 1–27 GPa, the ideal scaffolds should mimic strength, stiffness and mechanical behavior, so as to avoid possible post-operation stress shielding effects, which induce bone resorption and consequent implant failure. In addition, the rate of degradation and the by-products of biodegradable materials are also critical in the role of bone regeneration. Indeed, the mechanical integrity of a scaffold will be significantly reduced if the degradation rate is rapid, thereby resulting in a pre-matured collapse of the scaffold before the tissue is regenerated. Another concern is that the by-products upon degradation may alter the tissue microenvironment and then challenge the biocompatibility of the scaffold and the subsequent tissue repair. Therefore, these two factors should be carefully considered when designing new biomaterials for tissue regeneration. To address the aforementioned questions, an overview of the design of ideal biomimetic porous scaffolds is presented in this paper. Hence, a number of original engineering processes and techniques, including the production of a hierarchical structure on both the macro- and nano-scales, the adjustment of biomechanical properties through structural alignment and chemical components, the control of the biodegradability of the scaffold and its by-products, the change of biomimetic surface properties by altering interfacial chemistry, and micro- and nano-topographies will be discussed. In general, the concepts and techniques mentioned above provide insights into designing superior biomimetic scaffolds for bone tissue engineering.

Biomimetic porous scaffolds for bone tissue engineering

Bone biomaterials play a vital role in bone repair by providing the necessary substrate for cell adhesion, proliferation, and differentiation and by modulating cell activity and function. In past decades, extensive efforts have been devoted to developing bone biomaterials with a focus on the following issues: (1) developing ideal biomaterials with a combination of suitable biological and mechanical properties; (2) constructing a cell microenvironment with pores ranging in size from nanoscale to submicro- and microscale; and (3) inducing the oriented differentiation of stem cells for artificial-to-biological transformation. Here we present a comprehensive review of the state of the art of bone biomaterials and their interactions with stem cells. Typical bone biomaterials that have been developed, including bioactive ceramics, biodegradable polymers, and biodegradable metals, are reviewed, with an emphasis on their characteristics and applications. The necessary porous structure of bone biomaterials for the cell microenvironment is discussed, along with the corresponding fabrication methods. Additionally, the promising seed stem cells for bone repair are summarized, and their interaction mechanisms with bone biomaterials are discussed in detail. Special attention has been paid to the signaling pathways involved in the focal adhesion and osteogenic differentiation of stem cells on bone biomaterials. Finally, achievements regarding bone biomaterials are summarized, and future research directions are proposed.

/pdf/bone-biomaterials-and-interactions-with-stem-cells-4c9eg43ssz.pdf

Bone biomaterials and interactions with stem cells.

PCL-coated hydroxyapatite scaffold derived from cuttlefish bone: morphology, mechanical properties and bioactivity.

Gelatin methacrylate (GelMA) is an inexpensive, photocrosslinkable, cell-responsive hydrogel which has drawn attention for a wide range of tissue engineering applications. The potential of GelMA scaffolds was demonstrated to be tunable for different tissue engineering (TE) applications through modifying the polymer concentration, methacrylation degree, or UV light intensity. Despite the promising results of GelMA hydrogels in tissue engineering, the influence of polymer concentration for bone tissue engineering (BTE) scaffolds was not established yet. Thus, in this study, we have demonstrated the effect of polymer concentration in GelMA scaffolds on osteogenic differentiation. We prepared GelMA scaffolds with 5 and 10% polymer concentrations and characterized the scaffolds in terms of porosity, pore size, swelling characteristics, and mechanical properties. Subsequent to the scaffolds characterization, the scaffolds were seeded with bone marrow derived rat mesenchymal stem cells and cultured in osteogenic media to evaluate the possible osteogenic differentiation effect exerted by the polymer concentration. After 7, 14, 21, and 28 days, DNA content, calcium deposition, and alkaline phosphatase (ALP) activity of scaffolds were evaluated quantitatively by colorimetric bioassays. Furthermore, the distribution of the calcium deposition within the scaffolds was attained qualitatively and quantitatively by microcomputer tomography (µCT). Our data suggest that GelMA hydrogels prepared with 5% polymer concentration has promoted homogeneous extracellular matrix calcification and it is a great candidate for BTE applications. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 201-209, 2018.

Gelatin methacrylate scaffold for bone tissue engineering: The influence of polymer concentration.

Interface tissue engineering (ITE) is used to repair or regenerate interface living tissue such as for instance bone and cartilage. This kind of tissues present natural different properties from a biological and mechanical point of view. With the aim to imitating the natural gradient occurring in the bone-cartilage tissue, several technologies and methods have been proposed over recent years in order to develop polymeric functionally graded scaffolds (FGS). In this study three-layered scaffolds with a pore size gradient were developed by melt mixing polylactic acid (PLA) and two water-soluble porogen agents: sodium chloride (NaCl) and polyethylene glycol (PEG). Pore dimensions were controlled by NaCl granulometry while PEG solvation created a micropores network within the devices. Scaffolds were characterized from a morphological and mechanical point of view in order to find a correlation between the preparation method, the pore architecture and compressive mechanical behavior. Biological tests were also performed in order to study the effect of pore size gradient on the permeation of different cell lines in co-culture. To imitate the physiological work condition, compressive tests were also performed in phosphate buffered saline (PBS) solution at 37°C. The presented preparation method permitted to prepare three-layered scaffolds with high control of porosity and pore size distribution. Furthermore mechanical behaviors were found to be strongly affected by pore architecture of tested devices as well as the permeation of osteoblast and fibroblast in-vitro.

Preparation of three-layered porous PLA/PEG scaffold: relationship between morphology, mechanical behavior and cell permeability

/pdf/bone-scaffolds-with-homogeneous-and-discrete-gradient-3c5t8m8lme.pdf

C. Jelen

Papers

Bone scaffolds with homogeneous and discrete gradient mechanical properties.