We discuss in this review how the roughness of a solid impacts its wettability. We see in particular that both the apparent contact angle and the contact angle hysteresis can be dramatically affected by the presence of roughness. Owing to the development of refined methods for setting very well-controlled micro- or nanotextures on a solid, these effects are being exploited to induce novel wetting properties, such as spontaneous filmification, superhydrophobicity, superoleophobicity, and interfacial slip, that could not be achieved without roughness.

Wetting and Roughness

Superhydrophobic surfaces have drawn a lot of interest both in academia and in industry because of the self-cleaning properties. This critical review focuses on the recent progress (within the last three years) in the preparation, theoretical modeling, and applications of superhydrophobic surfaces. The preparation approaches are reviewed according to categorized approaches such as bottom-up, top-down, and combination approaches. The advantages and limitations of each strategy are summarized and compared. Progress in theoretical modeling of surface design and wettability behavior focuses on the transition state of superhydrophobic surfaces and the role of the roughness factor. Finally, the problems/obstacles related to applicability of superhydrophobic surfaces in real life are addressed. This review should be of interest to students and scientists interested specifically in superhydrophobic surfaces but also to scientists and industries focused in material chemistry in general.

What do we need for a superhydrophobic surface? A review on the recent progress in the preparation of superhydrophobic surfaces

A superhydrophobic surface is a surface with a water contact angle close to or higher than 150°. In this feature article, we review the historical and present research on superhydrophobic surfaces, including the characterization of superhydrophobicity, different ways to fabricate rough surfaces, and low-surface-energy modifications on inorganic and organic rough surfaces. It is the combination of surface roughness and low-surface-energy modification that leads to superhydrophobicity. Notably, research on superhydrophobic surfaces has not only fundamental interest but various possible functional applications in micro- and nano-materials and devices.

Superhydrophobic surfaces: from structural control to functional application

Keywords: Fragmentation Chain-Transfer ; Self-Assembled Monolayers ; Walled Carbon Nanotubes ; Well-Defined Polymer ; Nitroxide-Mediated Polymerization ; Block-Copolymer Brushes ; Poly(Methyl Methacrylate) Brushes ; Transfer Raft Polymerization ; Quartz-Crystal Microbalance ; Poly(Acrylic Acid) Brushes Reference EPFL-REVIEW-148464doi:10.1021/cr900045aView record in Web of Science Record created on 2010-04-23, modified on 2017-05-10

Polymer Brushes via Surface-Initiated Controlled Radical Polymerization: Synthesis, Characterization, Properties, and Applications

Design, and Applications Shutao Wang,†,‡ Kesong Liu, Xi Yao, and Lei Jiang*,†,‡,§ †Laboratory of Bio-inspired Smart Interface Science, Technical Institute of Physics and Chemistry, and ‡Beijing National Laboratory for Molecular Science, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190, People’s Republic of China Key Laboratory of Bio-Inspired Smart Interfacial Science and Technology of Ministry of Education, School of Chemistry and Environment, BeiHang University, Beijing 100191, People’s Republic of China Department of Biomedical Sciences, City University of Hong Kong, Hong Kong P6903, People’s Republic of China

Bioinspired Surfaces with Superwettability: New Insight on Theory, Design, and Applications

A simple two-step plasmachemical methodology is outlined for the fabrication of microcondensor surfaces. This comprises the creation of a superhydrophobic background followed by pulsed plasma deposition of a hydrophilic polymer array. Microcondensation efficiency has been explored in terms of the chemical nature of the hydrophilic pixels and their dimensions. These results are compared to the hydrophilic-hydrophobic pattern present on the Stenocara beetle's back, which is used by the insect to collect water in the desert. Potential applications include fog harvesting, microfluidics, and biomolecule immobilization.

Mimicking a Stenocara Beetle's Back for Microcondensation Using Plasmachemical Patterned Superhydrophobic−Superhydrophilic Surfaces

Repetitive bursts of continuous wave plasma polymerization on the minute time scale are found to lead to the deposition of well-defined polymeric nanospheres. This unique mode of film growth is attributed to a high level of monomer replenishment in combination with minimal secondary reaction processes (e.g., fragmentation, cross-linking, and etching). In the case of the 1H,1H,2H,2H-perfluorooctyl acrylate precursor, high contact angle (super-hydrophobic) surfaces are produced by this method.

Pulsed Plasma Deposition of Super-Hydrophobic Nanospheres

A simple method for growing polymer brushes by atom transfer radical polymerization (ATRP) off solid surfaces has been devised. This entails pulsed plasmachemical deposition of a halogen-containing initiator layer, followed by either organic or aqueous phase controlled surface polymerization. The wide-scale applicability of this approach is exemplified by functionalizing flat substrates, microbeads, and nonwoven textiles.

Substrate-independent approach for polymer brush growth by surface atom transfer radical polymerization.

Pulsed plasma-chemical deposition of poly(maleic anhydride) is shown to be a substrate-independent method for functionalizing solid surfaces with initiator sites for nitroxide-mediated controlled free-radical graft polymerization. Swelling of the initiator film via aminolysis can lead to grafted polymer brushes that are 1 order of magnitude thicker than those obtained by existing methods on solid surfaces.

Rapid polymer brush growth by TEMPO-mediated controlled free-radical polymerization from swollen plasma deposited poly(maleic anhydride) initiator surfaces.

Pulsed plasma polymerization of N-isopropylacrylamide leads to the deposition of thermoresponsive films. The reversible (switching) behavior of these poly(N-isopropylacrylamide) surfaces has been exemplified by screening the adsorption of fibrinogen and fluorescein isothiocyanate labeled bovine serum albumin proteins by surface plasmon resonance (SPR) and fluorescence microscopy at low and elevated temperatures.

D. O. H. Teare

Papers

Mimicking a Stenocara Beetle's Back for Microcondensation Using Plasmachemical Patterned Superhydrophobic−Superhydrophilic Surfaces

Pulsed Plasma Deposition of Super-Hydrophobic Nanospheres

Substrate-independent approach for polymer brush growth by surface atom transfer radical polymerization.

Rapid polymer brush growth by TEMPO-mediated controlled free-radical polymerization from swollen plasma deposited poly(maleic anhydride) initiator surfaces.

Functionalization of solid surfaces with thermoresponsive protein-resistant films.