Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

Fast parallel algorithms for short-range molecular dynamics

THE DESIGN AND ANALYSIS OF EXPERIMENTS. By Oscar Kempthorne. New York, John Wiley and Sons, Inc., 1952. 631 pp. $8.50. This book by a teacher of statistics (as well as a consultant for \"experimenters\") is a comprehensive study of the philosophical background for the statistical design of experiment. It is necessary to have some facility with algebraic notation and manipulation to be able to use the volume intelligently. The problems are presented from the theoretical point of view, without such practical examples as would be helpful for those not acquainted with mathematics. The mathematical justification for the techniques is given. As a somewhat advanced treatment of the design and analysis of experiments, this volume will be interesting and helpful for many who approach statistics theoretically as well as practically. With emphasis on the \"why,\" and with description given broadly, the author relates the subject matter to the general theory of statistics and to the general problem of experimental inference. MARGARET J. ROBERTSON

The Design and Analysis of Experiments

The American Society for Testing and Materials (ASTM) is an independent organization devoted to the development of standards.

American Society for Testing and Materials

The science and technology of ultracapacitors are reviewed for a number of electrode materials, including carbon, mixed metal oxides, and conducting polymers. More work has been done using microporous carbons than with the other materials and most of the commercially available devices use carbon electrodes and an organic electrolytes. The energy density of these devices is 3¯5 Wh/kg with a power density of 300¯500 W/kg for high efficiency (90¯95%) charge/discharges. Projections of future developments using carbon indicate that energy densities of 10 Wh/kg or higher are likely with power densities of 1¯2 kW/kg. A key problem in the fabrication of these advanced devices is the bonding of the thin electrodes to a current collector such the contact resistance is less than 0.1 cm2. Special attention is given in the paper to comparing the power density characteristics of ultracapacitors and batteries. The comparisons should be made at the same charge/discharge efficiency.

Ultracapacitors: Why, How, and Where is the Technology

Macroporous ceramics with pore sizes from 400 nm to 4 mm and porosity within the range 20%–97% have been produced for a number of well-established and emerging applications, such as molten metal filtration, catalysis, refractory insulation, and hot gas filtration. These applications take advantage of the unique properties achieved through the incorporation of macropores into solid ceramics. In this article, we review the main processing routes that can be used for the fabrication of macroporous ceramics with tailored microstructure and chemical composition. Emphasis is given to versatile and simple approaches that allow one to control the microstructural features that ultimately determine the properties of the macroporous material. Replica, sacrificial template, and direct foaming techniques are described and compared in terms of microstructures and mechanical properties that can be achieved. Finally, directions to future investigations on the processing of macroporous ceramics are proposed.

/pdf/processing-routes-to-macroporous-ceramics-a-review-1urld578zq.pdf

Processing Routes to Macroporous Ceramics: A Review

Avaliação da Potencialidade do Uso de Resíduos Industriais Através de Ferramenta de Seleção de Materiais para Projeto de Produtos Cerâmicos

Low-Temperature Sintered LZSA Cellular Glass Ceramics

1 , 4 1 Pgmat-UFSC. Florianopolis - SC (Brasil); 2 ENQ-UFSC. Florianopolis - SC (Brasil); 3 CTCMat-Senai. Criciuma - SC (Brasil); 4 Camat-UFSC. Florianopolis - SC (Brasil)

Dachamir Hotza

Papers

Avaliação da Potencialidade do Uso de Resíduos Industriais Através de Ferramenta de Seleção de Materiais para Projeto de Produtos Cerâmicos

Low-Temperature Sintered LZSA Cellular Glass Ceramics

Vitrocerâmicas porosas do sistema LZSA utilizando resíduos orgânicos como agentes formadores de poros DOI: 10.5585/exacta.v4i2.757

Erratum to: “Sintering kinetics of a 18.8Li2O 8.3ZrO2 64.2SiO2 8.7Al2O3 glass ceramic” [Ceramics International 37 (2011) 1865–1871]

Enhanced CO_2 capture by cupuassu shell-derived activated carbon with high microporous volume