We present a comprehensive review of the material properties of cadmium zinc telluride (CZT, Cd1ˇxZnxTe) with zinc content xa 0:1‐0.2. Particular emphasis is placed on those aspects of this material related to room temperature nuclear detectors. A review of the structural properties, charge transport, and contacting issues and how these are related to detector and spectrometer performance is presented. A comprehensive literature survey and bibliography are also included. # 2001 Elsevier Science B.V. All rights reserved.

Cadmium zinc telluride and its use as a nuclear radiation detector material

Emerging trends in manufacturing such as light weighting, increased performance and functionality increases the use of multi-material, hybrid structures and thus the need for joining of dissimilar materials. The properties of the different materials are jointly utilised to achieve product performance. The joining processes can, on the other hand be challenging due to the same different properties. This paper reviews and summarizes state of the art research in joining dissimilar materials. Current and emerging joining technologies are reviewed according to the mechanisms of joint formation, i.e.; mechanical, chemical, thermal, or hybrid processes. Methods for process selection are described and future challenges for research on joining dissimilar materials are summarized.

/pdf/joining-of-dissimilar-materials-5d5ghi3lwg.pdf

Joining of dissimilar materials

Modeling metal deposition in heat transfer analyses of additive manufacturing processes

Book reviewsComposite materials: fatigue and fracture: Edited by: H.T. Hahn ASTM STP 907, 1986 (£64.00)

Numerical simulation of thermal behavior and multicomponent mass transfer in direct laser deposition of Co-base alloy on steel

A direct computer simulation technique, discrete element analysis (DEA), was utilized in the development of a transient multidimensional (2-D and 3-D) mathematical model for investi-gating coupled conduction and convection heat transfer problems associated with stationary and moving arc welding processes. The mathematical formulation considers buoyancy, electro-magnetic, and surface tension driving forces in the solution of the overall heat transfer conditions in the specimen. Furthermore, the formulation of the model allows realistic consideration of the geometrical variations in the workpiece. The model treats the -weld pool surface as a truly deformable free surface, allowing for the prediction of the weld surface deformations such as the “weld crown.≓ A marked element formulation was employed to monitor the transient de-velopment of the weld pool as determined by the latent heat considerations and the calculated velocities in the weld pool. The model was utilized to simulate the heat and fluid flows in the weld pool that occur during stationary (spot) and moving (linear) gas tungsten-arc welding. Also, the present analysis considers a simple rectangular specimen and a geometrically complex specimen to demonstrate the capability of the model to simulate realistic 3-D arc welding prob-lems. The results of the present investigation clearly demonstrate the significant influence of the heat and fluid flows and the specimen geometry on the development of the weld. Comparison of the predicted and the experimentally observed fusion zone and heat-affected zone (HAZ) geometries indicate good agreement.

Daryush K. Aidun

Papers

Three-dimensional transient model for arc welding process

Thermal modeling and characterization of wire arc additive manufactured duplex stainless steel

Optimal design of hybrid renewable energy systems (HRES) using hydrogen storage technology for data center applications

Characterization of precipitates in CdTe and Cd(1-x)Zn(x)Te grown by vertical Bridgman-Stockbarger technique

Study of mass transport in cold wire deposition for Wire Arc Additive Manufacturing