Core–shell composites, Fe3O4@C, with 500 nm Fe3O4 microspheres as cores have been successfully prepared through in situ polymerization of phenolic resin on the Fe3O4 surface and subsequent high-temperature carbonization. The thickness of carbon shell, from 20 to 70 nm, can be well controlled by modulating the weight ratio of resorcinol and Fe3O4 microspheres. Carbothermic reduction has not been triggered at present conditions, thus the crystalline phase and magnetic property of Fe3O4 micropsheres can be well preserved during the carbonization process. Although carbon shells display amorphous nature, Raman spectra reveal that the presence of Fe3O4 micropsheres can promote their graphitization degree to a certain extent. Coating Fe3O4 microspheres with carbon shells will not only increase the complex permittivity but also improve characteristic impedance, leading to multiple relaxation processes in these composites, thus the microwave absorption properties of these composites are greatly enhanced. Very inte...

Shell thickness-dependent microwave absorption of core-shell Fe3O4@C composites.

The residual defects and groups in chemically reduced graphene oxide cannot only improve the impedance match characteristic and prompt energy transition from contiguous states to Fermi level, but also introduce defect polarization relaxation and groups’ electronic dipole relaxation, which are all in favor of electromagnetic wave penetration and absorption The chemically reduced graphene oxide shows enhanced microwave absorption compared with graphite and carbon nanotubes, and can be expected to display better absorption than high quality graphene, exhibiting a promising prospect as microwave absorbing material

The electromagnetic property of chemically reduced graphene oxide and its application as microwave absorbing material

In this work, atomic layer deposition is applied to coat carbon nanocoils with magnetic Fe(3)O(4) or Ni. The coatings have a uniform and highly controlled thickness. The coated nanocoils with coaxial multilayer nanostructures exhibit remarkably improved microwave absorption properties compared to the pristine carbon nanocoils. The enhanced absorption ability arises from the efficient complementarity between complex permittivity and permeability, chiral morphology, and multilayer structure of the products. This method can be extended to exploit other composite materials benefiting from its convenient control of the impedance matching and combination of dielectric-magnetic multiple loss mechanisms for microwave absorption applications.

Microwave Absorption Properties of Carbon Nanocoils Coated with Highly Controlled Magnetic Materials by Atomic Layer Deposition

Recent advances in polyaniline research: Polymerization mechanisms, structural aspects, properties and applications

Rational design of core-shell Co@C microspheres for high-performance microwave absorption

Microstructured Ni/PPy (PPy: polypyrrole) core/shell composites were prepared from an in situ chemical oxidative polymerization of pyrrole (Py) monomer in the presence of Ni powder, with ammonium persulfate (APS) as oxidant and citric acid (C6H8O7) as dopant. X-ray diffraction and Fourier transform infrared analyses indicate that there is no chemical interaction between Ni powder and protonated PPy. The mass percentages of PPy, calculated from the remanent weight percentages of Ni/PPy composites after thermogravimetric analysis, are in consistent with those as designed. The prepared Ni/PPy composites are soft and ferromagnetic materials, where a linear increase of saturation magnetization (MS) and remanent magnetization (MR) as a function of Ni powder content is proposed. The permeability of Ni/PPy composites presents a natural magnetic resonance at 6.0 GHz, and Cole−Cole semicircle was applied to explain the permittivity. Electromagnetic absorption less than −10 dB is found for Ni/Py = 4:1 (11−15.4 GHz) ...

Donghua Zhou

Papers

Synthesis of Electromagnetic Functionalized Nickel/Polypyrrole Core/Shell Composites

Synthesis of polyaniline nanofibers with high electrical conductivity from CTAB–SDBS mixed surfactants