http://staff.ulsu.ru/moliver/ref/polymers/pott11.pdf

Graphene-based polymer nanocomposites

Dielectric polymer nanocomposites are rapidly emerging as novel materials for a number of advanced engineering applications. In this Review, we present a comprehensive review of the use of ferroelectric polymers, especially PVDF and PVDF-based copolymers/blends as potential components in dielectric nanocomposite materials for high energy density capacitor applications. Various parameters like dielectric constant, dielectric loss, breakdown strength, energy density, and flexibility of the polymer nanocomposites have been thoroughly investigated. Fillers with different shapes have been found to cause significant variation in the physical and electrical properties. Generally, one-dimensional and two-dimensional nanofillers with large aspect ratios provide enhanced flexibility versus zero-dimensional fillers. Surface modification of nanomaterials as well as polymers adds flavor to the dielectric properties of the resulting nanocomposites. Nowadays, three-phase nanocomposites with either combination of fillers...

Recent Progress on Ferroelectric Polymer-Based Nanocomposites for High Energy Density Capacitors: Synthesis, Dielectric Properties, and Future Aspects.

Study of flexible nanodielectric materials (FNDMs) with high permittivity is one of the most active academic research areas in advanced functional materials. FNDMs with excellent dielectric properties are demonstrated to show great promise as energy-storage dielectric layers in high-performance capacitors. These materials, in common, consist of nanoscale particles dispersed into a flexible polymer matrix so that both the physical/chemical characteristics of the nanoparticles and the interaction between the nanoparticles and the polymers have crucial effects on the microstructures and final properties. This review first outlines the crucial issues in the nanodielectric field and then focuses on recent remarkable research developments in the fabrication of FNDMs with special constitutents, molecular structures, and microstructures. Possible reasons for several persistent issues are analyzed and the general strategies to realize FNDMs with excellent integral properties are summarized. The review further highlights some exciting examples of these FNDMs for power-energy-storage applications.

Flexible Nanodielectric Materials with High Permittivity for Power Energy Storage

With rapid progress in a power conversion efficiency (PCE) to reach 25%, metal halide perovskite-based solar cells became a game-changer in a photovoltaic performance race. Triggered by the development of the solid-state perovskite solar cell in 2012, intense follow-up research works on structure design, materials chemistry, process engineering, and device physics have contributed to the revolutionary evolution of the solid-state perovskite solar cell to be a strong candidate for a next-generation solar energy harvester. The high efficiency in combination with the low cost of materials and processes are the selling points of this cell over commercial silicon or other organic and inorganic solar cells. The characteristic features of perovskite materials may enable further advancement of the PCE beyond those afforded by the silicon solar cells, toward the Shockley-Queisser limit. This review summarizes the fundamentals behind the optoelectronic properties of perovskite materials, as well as the important approaches to fabricating high-efficiency perovskite solar cells. Furthermore, possible next-generation strategies for enhancing the PCE over the Shockley-Queisser limit are discussed.

High-Efficiency Perovskite Solar Cells.

Dramatic changes in the physical properties of composites occur when filler particles form a percolating network through the composite, particularly when the difference between the properties of the constitutive phases is large. By use of electric conductivity and dielectric properties as examples, recent studies on the physical properties of composites near percolation are reviewed. The effects of geometric factors and intrinsic properties of the fillers and the matrix, and especially of the interface between fillers and matrix, on electric and dielectric properties near percolation are discussed. Contact resistivity at the interface is less desirable for enhancing electrical conductivity. By contrast, an interface with high resistivity suppresses tunneling between adjacent fillers and leads to percolative composites with higher dielectric constant but lower dielectric loss. This review concludes with an outlook on the future possibilities and scientific challenges in the field.

Physical Properties of Composites Near Percolation

We report here a concept for utilization of the "coffee ring effect" and inkjet printing to obtain transparent conductive patterns, which can replace the widely used transparent conductive oxides, such as ITO. The transparent conductive coating is achieved by forming a 2-D array of interconnected metallic rings. The rim of the individual rings is less than 10 microm in width and less than 300 nm in height, surrounding a "hole" with a diameter of about 150 microm; therefore the whole array of the interconnected rings is almost invisible to the naked eye. The rims of the rings are composed of self-assembled, closely packed silver nanoparticles, which make the individual rings and the resulting array electrically conductive. The resulting arrays of rings have a transparency of 95%; resistivity of 0.5 cm(2) was 4 +/- 0.5 Omega/, which is better than conventional ITO transparent thin films. The silver rings and arrays are fabricated by a very simple, low cost process, based on inkjet printing of a dispersion of 0.5 wt % silver nanoparticles (approximately 20 nm diameter) on plastic substrates. The performance of this transparent conductive coating was demonstrated by using it as an electrode for a plastic electroluminescent device, demonstrating the applicability of this concept in plastics electronics. It is expected that such transparent conductive coatings can be used in a wide range of applications such as displays (LCD, plasma, touch screens, e-paper), lighting devices (electroluminescence, OLED), and solar cells.

Transparent conductive coatings by printing coffee ring arrays obtained at room temperature

Classical percolation theory is concerned with the onset of geometrical connectivity and the accompanied onset of electrical connectivity in disordered systems. It was found, however, that in many systems, such as various composites, the geometrical and electrical onsets of the connectivity are not simultaneous and the correlation between them depends on physical processes such as tunneling. The difference between the above two types of systems and the consequences for the electrical transport properties of the latter composites have been largely ignored in the past. The application of scanning local probe microscopies and some recent theoretical developments have enabled a better understanding of the latter systems and their sometimes "strange" behavior as bona fide percolation systems. In this review we consider the above issues and their manifestation in three types of systems: Carbon Black–Polymer composites, metal–insulator cermets and hydrogenated microcrystalline silicon.

Percolation and tunneling in composite materials

In many composites, the electrical transport takes place only by tunneling between isolated particles. For a long time, it was quite a puzzle how, in spite of the incompatibility of tunneling and percolation networks, these composites conform well to percolation theory. We found, by conductance atomic force microscopy measurements on granular metals, that it is the apparent cut off of the tunneling to non-nearest-neighbors that brings about this behavior. In particular, the percolation cluster is shown to consist of the nearest-neighbors subnetwork of the full tunneling network.

Tunneling and percolation in metal-insulator composite materials

Current routes in polycrystalline CuInSe2 and Cu(In,Ga)Se2 films

Obtaining insight into, and ultimately control over, electronic doping of halide perovskites may improve tuning of their remarkable optoelectronic properties, reflected in what appear to be low defect densities and as expressed in various charge transport and optical parameters. Doping is important for charge transport because it determines the electrical field within the semiconducting photoabsorber, which strongly affects collection efficiency of photogenerated charges. Here we report on intrinsic doping of methylammonium lead tri-iodide, MAPbI3, as thin films of the types used for solar cells and LEDs, by I2 vapor at a level that does not affect the optical absorption and leads to a small (<20 meV, ∼9 nm) red shift in the photoluminescence peak. This I2 vapor treatment makes the films 10× more electronically conductive in the dark. We show that this change is due to p-type doping because we find their work function to increase by 150 mV with respect to the ionization energy (valence band maximum), whic...

Doron Azulay

Papers

Transparent conductive coatings by printing coffee ring arrays obtained at room temperature

Percolation and tunneling in composite materials

Tunneling and percolation in metal-insulator composite materials

Current routes in polycrystalline CuInSe2 and Cu(In,Ga)Se2 films

What Is the Mechanism of MAPbI3 p-Doping by I2? Insights from Optoelectronic Properties