Heat release rate: The single most important variable in fire hazard☆

Fire dynamics simulator- technical reference guide

/pdf/fire-dynamics-simulator-version-5-user-s-guide-5058kzb0fm.pdf

Fire Dynamics Simulator (Version 5): User's Guide

Certain commercial entities, equipment, or materials may be identified in this document in order to describe an experimental procedure or concept adequately. Such identification is not intended to imply recommendation or endorsement by the National Institute of Standards and Technology, nor is it intended to imply that the entities, materials, or equipment are necessarily the best available for the purpose. Preface The use of fire models currently extends beyond the fire research laboratories and into the engineering, fire service and legal communities. Surveys [1, 2] of available fire models show a significant increase in number over the last decade. Sufficient evaluation of any model is necessary to ensure that users can judge the adequacy of its technical basis, appropriateness of its use, and confidence level of its predictions. This document provides the theoretical basis for the Fire Dynamics Simulator (FDS) and a summary of the work performed to evaluate the model. This guide is based in part on the " Standard Guide for Evaluating the Predictive Capability of De-terministic Fire Models, " ASTM E 1355 [3]. ASTM E 1355 defines model evaluation as " the process of quantifying the accuracy of chosen results from a model when applied for a specific use. " The model evaluation process consists of two main components: verification and validation. Verification is a process to check the correctness of the solution of the governing equations. Verification does not imply that the governing equations are appropriate; only that the equations are being solved correctly. Validation is a process to determine the appropriateness of the governing equations as a mathematical model of the physical phenomena of interest. Typically, validation involves comparing model results with experimental measurement. Differences that cannot be explained in terms of numerical errors in the model or uncertainty in the measurements are attributed to the assumptions and simplifications of the physical model. Evaluation is critical to establishing both the acceptable uses and limitations of a model. Throughout its development, FDS has undergone various forms of evaluation, both at NIST and beyond. This guide provides a survey of work conducted to date to evaluate FDS. Roughly half of the referenced studies were aimed primarily at model evaluation, the other half describe limited work to validate FDS for a specific use. The latter group were performed mostly by practicing engineers who did not have the time or resources to comprehensively evaluate the model. Collectively, the body …

/pdf/fire-dynamics-simulator-version-3-technical-reference-guide-47qshgton4.pdf

Fire dynamics simulator (Version 3) - Technical reference guide

Flame retardant challenges for textiles and fibres: New chemistry versus innovatory solutions

Machine generated contents note: About the AuthorPreface to the Second EditionPreface to the Third EditionList of Symbols and Abbreviations1 Fire science and combustion 1.1 Fuels and the Combustion Process 1.2 The Physical Chemistry of Combustion in Fires Problems2 Heat transfer 2.1 Summary of the heat transfer equations 2.2 Conduction 2.3 Convection 2.4 Radiation Problems3 Limits of flammability and premixed flames 3.1 Limits of flammability 3.2 The structure of a premixed flame 3.3 Heat losses from premixed flames 3.4 Measurement of burning velocities 3.5 Variation of burning velocity with experimental parameters 3.6 The effect of turbulence Problems4 Diffusion flames and fire plumes 4.1 Laminar jet flames 4.2 Turbulent jet flames 4.3 Flames from natural fires 4.4 Some practical applications Problems5 Steady burning of liquids and solids 5.1 Burning of liquids 5.2 Burning of solids Problems6 Ignition: The initiation of flaming combustion 6.1 Ignition of^

An Introduction to Fire Dynamics

Ignition: The Initiation of Flaming Combustion

Fire Science and Combustion

The purpose of this chapter is to discuss the ignition characteristics of combustible liquids that are in widespread use as fuels and solvents and are encountered as process fluids in the chemical and process industries. Ignition leads to flaming combustion in which the fuel undergoes a change of state and is converted from liquid to vapor.

Dougal Drysdale

Papers

An Introduction to Fire Dynamics

Ignition: The Initiation of Flaming Combustion

Fire Science and Combustion

Ignition of Liquids

Steady Burning of Liquids and Solids