Solar Engineering Of Thermal Processes

This paper presents a review of the organic Rankine cycle and supercritical Rankine cycle for the conversion of low-grade heat into electrical power, as well as selection criteria of potential working fluids, screening of 35 working fluids for the two cycles and analyses of the influence of fluid properties on cycle performance. The thermodynamic and physical properties, stability, environmental impacts, safety and compatibility, and availability and cost are among the important considerations when selecting a working fluid. The paper discusses the types of working fluids, influence of latent heat, density and specific heat, and the effectiveness of superheating. A discussion of the 35 screened working fluids is also presented.

A review of thermodynamic cycles and working fluids for the conversion of low-grade heat

Introduction to heat transfer

An experimental investigation on the effect of Al2O3–H2O nanofluid on the efficiency of flat-plate solar collectors

A review of thermoelectric cooling: Materials, modeling and applications

Diffuse fraction correlations

Evaluation of hourly tilted surface radiation models

http://www.me.uvic.ca/~ndjilali/MECH549/Braun_JPS_2006.pdf

Evaluation of system configurations for solid oxide fuel cell-based micro-combined heat and power generators in residential applications

Heat transfer devices are provided in many refrigeration systems to exchange energy between the cool gaseous refrigerant leaving the evaporator and warm liquid refrigerant exiting the condenser. These liquid-suction or suction-line heat exchangers can, in some cases, yield improved system performance while in other cases they degrade system performance. Although previous researchers have investigated performance of liquid-suction heat exchangers, this study can be distinguished from the previous studies in three ways. First, this paper identifies a new dimensionless group to correlate performance impacts attributable to liquid-suction heat exchangers. Second, the paper extends previous analyses to include new refrigerants. Third, the analysis includes the impact of pressure drops through the liquid-suction heat exchanger on system performance. It is shown that reliance on simplified analysis techniques can lead to inaccurate conclusions regarding the impact of liquid-suction heat exchangers on refrigeration system performance. From detailed analyses, it can be concluded that liquid-suction heat exchangers that have a minimal pressure loss on the low pressure side are useful for systems using R507A, R134a, R12, R404A, R290, R407C, R600, and R410A. The liquid-suction heat exchanger is detrimental to system performance in systems using R22, R32, and R717.

/pdf/refrigeration-system-performance-using-liquid-suction-heat-1zpx1y2e1q.pdf

Refrigeration system performance using liquid-suction heat exchangers

Supercritical carbon dioxide (SCO2) Brayton cycles have the potential to offer improved thermal-to-electric conversion efficiency for utility scale electricity production. These cycles have generated considerable interest in recent years because of this potential and are being considered for a range of applications, including nuclear and concentrating solar power (CSP). Two promising SCO2 power cycle variations are the simple Brayton cycle with recuperation and the recompression cycle. The models described in this paper are appropriate for the analysis and optimization of both cycle configurations under a range of design conditions. The recuperators in the cycle are modeled assuming a constant heat exchanger conductance value, which allows for computationally efficient optimization of the cycle’s design parameters while accounting for the rapidly varying fluid properties of carbon dioxide near its critical point. Representing the recuperators using conductance, rather than effectiveness, allows for a more appropriate comparison among design-point conditions because a larger conductance typically corresponds more directly to a physically larger and higher capital cost heat exchanger. The model is used to explore the relationship between recuperator size and heat rejection temperature of the cycle, specifically in regard to maximizing thermal efficiency. The results presented in this paper are normalized by net power output and may be applied to cycles of any size. Under the design conditions considered for this analysis, results indicate that increasing the design high-side (compressor outlet) pressure does not always correspond to higher cycle thermal efficiency. Rather, there is an optimal compressor outlet pressure that is dependent on the recuperator size and operating temperatures of the cycle and is typically in the range of 30–35 MPa. Model results also indicate that the efficiency degradation associated with warmer heat rejection temperatures (e.g., in dry-cooled applications) are reduced by increasing the compressor inlet pressure. Because the optimal design of a cycle depends upon a number of application-specific variables, the model presented in this paper is available online and is envisioned as a building block for more complex and specific simulations. [DOI: 10.1115/1.4027936]

Douglas T. Reindl

Papers

Diffuse fraction correlations

Evaluation of hourly tilted surface radiation models

Evaluation of system configurations for solid oxide fuel cell-based micro-combined heat and power generators in residential applications

Refrigeration system performance using liquid-suction heat exchangers

Design Considerations for Supercritical Carbon Dioxide Brayton Cycles With Recompression