Emerging challenges and materials for thermal management of electronics

In this paper, an overview of antenna design for passive radio frequency identification (RFID) tags is presented. We discuss various requirements of such designs, outline a generic design process including range measurement techniques and concentrate on one practical application: RFID tag for box tracking in warehouses. A loaded meander antenna design for this application is described and its various practical aspects such as sensitivity to fabrication process and box content are analyzed. Modeling and simulation results are also presented which are in good agreement with measurement data.

Antenna design for UHF RFID tags: a review and a practical application

This paper reviews the present knowledge on tantalum pentoxide (Ta 2 O 5 ) thin films and their applications in the field of microelectronics and integrated microtechnologies. Different methods used to produce tantalum oxide layers are described, emphazing elaboration mechanisms and key parameters for each technique. We also review recent advances in the deposition of Ta 2 O 5 in the particular field of microelectronics where high quality layers are required from the structural and electrical points of view. The physical, structural, optical, chemical and electrical properties of tantalum oxide thin films on semiconductors are then presented and essential film parameters, such as optical index, film density or dielectric permittivity, are discussed. After a reminder of the basic mechanisms that control the bulk electrical conduction in insulating films, we carefully examine the origin of leakage currents in Ta 2 O 5 and present the state-of-the-art concerning the insulating behaviour of tantalum oxide layers. Finally, applications of tantalum oxide thin films are presented in the last part of this paper. We show how Ta 2 O 5 has been employed as an antireflection coating, insulating layer, gate oxide, corrosion resistant material, and sensitive layer in a wide variety of components, circuits and sensors.

Tantalum pentoxide (Ta2O5) thin films for advanced dielectric applications

Wafer bonding with intermediate polymer adhesives is an important fabrication technique for advanced microelectronic and microelectromechanical systems, such as three-dimensional integrated circuits, advanced packaging, and microfluidics. In adhesive wafer bonding, the polymer adhesive bears the forces involved to hold the surfaces together. The main advantages of adhesive wafer bonding include the insensitivity to surface topography, the low bonding temperatures, the compatibility with standard integrated circuit wafer processing, and the ability to join different types of wafers. Compared to alternative wafer bonding techniques, adhesive wafer bonding is simple, robust, and low cost. This article reviews the state-of-the-art polymer adhesive wafer bonding technologies, materials, and applications.

Adhesive wafer bonding

Three-dimensional (3D) silicon integration of active devices with through-silicon vias (TSVs), thinned silicon, and silicon-to-silicon fine-pitch interconnections offers many product benefits. Advantages of these emerging 3D silicon integration technologies can include the following: power efficiency, performance enhancements, significant product miniaturization, cost reduction, and modular design for improved time to market. IBM research activities are aimed at providing design rules, structures, and processes that make 3D technology manufacturable for chips used in actual products on the basis of data from test-vehicle (i.e., prototype) design, fabrication, and characterization demonstrations. Three-dimensional integration can be applied to a wide range of interconnection densities (<10/cm2 to 108/cm2), requiring new architectures for product optimization and multiple options for fabrication. Demonstration test structures, which are designed, fabricated, and characterized, are used to generate experimental data, establish models and design guidelines, and help define processes for future product consideration. This paper 1) reviews technology integration from a historical perspective, 2) describes industry-wide progress in 3D technology with examples of TSV and silicon-silicon interconnection advancement over the last 10 years, 3) highlights 3D technology from IBM, including demonstration test vehicles used to develop ground rules, collect data, and evaluate reliability, and 4) provides examples of 3D emerging industry product applications that could create marketable systems.

Three-dimensional silicon integration

Although the thin-film embedded capacitors have been realized in the prototype quantities, there are several challenging issues for their product applications. Specifically, a successful integration of these capacitors at onchip and/or off-chip levels requires their compatibility, reliability, and interaction (diffusion and/or reaction) with the metal interconnections and their insulators. This chapter discusses many of the key issues and challenges for the integration of thin film capacitors.

E. J. Rymaszewski

Papers

Integration Issues and Challenges