Clinically approved neural stimulators are limited by battery requirements, as well as by their large size compared with the stimulation targets. Here, we describe a wireless, leadless and battery-free implantable neural stimulator that is 1.7 mm3 and that incorporates a piezoceramic transducer, an energy-storage capacitor and an integrated circuit. An ultrasonic link and a hand-held external transceiver provide the stimulator with power and bidirectional communication. The stimulation protocols were wirelessly encoded on the fly, reducing power consumption and on-chip memory, and enabling protocol complexity with a high temporal resolution and low-latency feedback. Uplink data indicating whether stimulation occurs are encoded by the stimulator through backscatter modulation and are demodulated at the external transceiver. When embedded in ex vivo porcine tissue, the integrated circuit efficiently harvested ultrasonic power, decoded downlink data for the stimulation parameters and generated current-controlled stimulation pulses. When cuff-mounted and acutely implanted onto the sciatic nerve of anaesthetized rats, the device conferred repeatable stimulation across a range of physiological responses. The miniaturized neural stimulator may facilitate closed-loop neurostimulation for therapeutic interventions. A wireless and battery-free 1.7-mm3 neural stimulator implanted onto the sciatic nerve of rats allows for repeatable stimulation across a range of physiological responses.

A wireless millimetre-scale implantable neural stimulator with ultrasonically powered bidirectional communication.

Unraveling the mechanistic effects of electric field stimulation towards directing stem cell fate and function: A tissue engineering perspective

Restoration of vision in blind individuals using bionic devices: a review with a focus on cortical visual prostheses

https://minerva-access.unimelb.edu.au/bitstream/handle/11343/43132/Shepherd-Visual prostheses_v160513_minus figs.pdf

Visual prostheses for the blind

Ultrasoft microwire neural electrodes improve chronic tissue integration.

Electrodes for cortical stimulation need to deliver current to neural tissue effectively and safely. We have developed electrodes with a novel annular geometry for use in cortical visual prostheses. Here, we explore a critical question on the ideal annulus height to ensure electrical stimulation will be safe and effective. We implanted single electrodes into the motor cortex of anesthetized rats and measured the current required to evoke a motor response to stimulation, and the charge injection capacity (CIC) of the electrodes. We compared platinum iridium (PtIr) electrodes with different annulus heights, with and without a coating of porous titanium nitride (TiN). Threshold charge densities to evoke a motor response ranged from 12 to 36 μC.cm(-2).ph(-1). Electrodes with larger geometric surface areas (GSAs) required higher currents to evoke responses, but lower charge densities. The addition of a porous TiN coating did not significantly influence the current required to evoke a motor response. The CIC of both electrode types was significantly reduced in vivo compared with in vitro measurements. The measured CIC was 72 and 18 μC.cm(-2).ph(-1) for electrodes with and without a TiN coating, respectively. These results support the use of PtIr annular electrodes with annulus heights greater than 100 μm (GSA of 38, 000 μm(2)). However, if the electrodes are coated with porous TiN the annulus height can be reduced to 40 μm (GSA of 16,000 μm(2)).

/pdf/in-vivo-comparison-of-the-charge-densities-required-to-evoke-1yevijn417.pdf

In vivo comparison of the charge densities required to evoke motor responses using novel annular penetrating microelectrodes

Objective. Cortical neural prostheses with implanted electrode arrays have been used to restore compromised brain functions but concerns remain regarding their long-term stability and functional performance. Approach. Here we report changes in electrode impedance and stimulation thresholds for a custom-designed electrode array implanted in rat motor cortex for up to three months. Main Results. The array comprises four 2000??m long electrodes with a large annular stimulating surface (7860?15700??m2) displaced from the penetrating insulated tip. Compared to pre-implantation in vitro values there were three phases of impedance change: (1) an immediate large increase of impedance by an average of two-fold on implantation; (2) a period of continued impedance increase, albeit with considerable variability, which reached a peak at approximately four weeks post-implantation and remained high over the next two weeks; (3) finally, a period of 5?6 weeks when impedance stabilized at levels close to those seen immediately post-implantation. Impedance could often be temporarily decreased by applying brief trains of current stimulation, used to evoke motor output. The stimulation threshold to induce observable motor behaviour was generally between 75?100??A, with charge density varying from 48?128??C cm?2, consistent with the lower current density generated by electrodes with larger stimulating surface area. No systematic change in thresholds occurred over time, suggesting that device functionality was not compromised by the factors that caused changes in electrode impedance. Significance. The present results provide support for the use of annulus electrodes in future applications in cortical neural prostheses.

https://iopscience.iop.org/article/10.1088/1741-2560/10/4/046010/pdf

Characteristics of electrode impedance and stimulation efficacy of a chronic cortical implant using novel annulus electrodes in rat motor cortex

Monash Vision Group is developing a bionic vision system based on implanting several small tiles in the V1 region of the visual cortex. This cortical approach could benefit a greater proportion of people with total blindness than other approaches, as it bypasses the eyes and optic nerve. Each tile has 43 active electrodes on its base, and a wirelessly powered electronic system to decode control signals and drive the electrodes with biphasic pulses. The tiles are fed with power and data using a common transmitting coil at the back of the patient's head. Sophisticated image processing, described in a companion paper, ensures that the user experiences maximum benefit from the small number of electrodes. This paper describes key features of this system.

Restoration of vision using wireless cortical implants: The Monash Vision Group project

Objective. Recording of neural signals from intact peripheral nerves in patients with spinal cord injury or stroke survivors offers the possibility for the development of closed-loop sensorimotor prostheses. Nerve cuffs have been found to provide stable recordings from peripheral nerves for prolonged periods of time. However, questions remain over the design and positioning of nerve cuffs such that the separability of neural data recorded from the peripheral nerves is improved. Approach. Afferent electroneurographic (ENG) signals were recorded with nerve cuffs placed on the sciatic nerve of rats in response to various mechanical stimuli to the hindpaw. The mean absolute value of the signal was extracted and input to a classifier. The performance of the classifier was evaluated under two conditions: (1) when information from either a 3- or 16-channel cuff was used; (2) when information was available from a cuff placed either distally or proximally along the nerve. Main results. We show that both 3- and 16-channel cuffs were able to separate afferent ENG signals with an accuracy greater than chance. The highest classification scores were achieved when the classifier was fed with information obtained from a 16-channel cuff placed distally. While the 16-channel cuff always outperformed the 3-channel cuff, the difference in performance was increased when the 16-channel cuff was placed distally rather than proximally on the nerve. Significance. The results indicate that increasing the complexity of a nerve cuff may only be advantageous if the nerve cuff is to be implanted distally, where the nerve has begun to divide into individual fascicles.

/pdf/influence-of-nerve-cuff-channel-count-and-implantation-site-2cs4pibu2s.pdf

Influence of nerve cuff channel count and implantation site on the separability of afferent ENG.

Considerable scientific and technological efforts are currently being made towards the development of neural prostheses. Understanding how the peripheral nervous system responds to electro-mechanical stimulation of the limb, will help to inform the design of prostheses that can restore function or accelerate recovery from injury to the sensory motor system. However, due to differences in experimental protocols, it is difficult, if not impossible, to make meaningful comparisons between different peripheral nerve interfaces. Therefore, we developed a low-cost electronic system to standardise the mechanical stimulation of a rat’s hindpaw. Three types of mechanical stimulations, namely, proprioception, touch and nociception were delivered to the limb and the electroneurogram signals were recorded simultaneously from the sciatic nerve with a 16-contact cuff electrode. For the first time, results indicate separability of neural responses according to stimulus type as well as intensity. Statistical analysis reveal that cuff contacts placed circumferentially, rather than longitudinally, are more likely to lead to higher classification rates. This flexible setup may be readily adapted for systematic comparison of various electrodes and mechanical stimuli in rodents. Hence, we have made its electro-mechanical design and computer programme available online

Emma Brunton

Papers

In vivo comparison of the charge densities required to evoke motor responses using novel annular penetrating microelectrodes

Characteristics of electrode impedance and stimulation efficacy of a chronic cortical implant using novel annulus electrodes in rat motor cortex

Restoration of vision using wireless cortical implants: The Monash Vision Group project

Influence of nerve cuff channel count and implantation site on the separability of afferent ENG.

Separability of neural responses to standardised mechanical stimulation of limbs.