In a data communication system capable of variable rate transmission, high rate packet data transmission improves utilization of the forward link and decreases the transmission delay. Data transmission on the forward link is time multiplexed and the base station transmits at the highest data rate supported by the forward link at each time slot to one mobile station. The data rate is determined by the largest C/I measurement of the forward link signals as measured at the mobile station. Upon determination of a data packet received in error, the mobile station transmits a NACK message back to the base station. The NACK message results in retransmission of the data packet received in error. The data packets can be transmitted out of sequence by the use of sequence number to identify each data unit within the data packets.

Method and apparatus for high-rate packet data transmission

A subscriber unit for use in a multiple access spread-spectrum communication system includes a spread spectrum radio interface, responsive to a rate function signal from a base station, and first and second despreaders. The base station assigns the rate function spread-spectrum message channels and the first despreader recovers and modifies an information signal one of the spread spectrum message channels. The information channel mode is then modified for processing by the second despreader, with the second despreader supporting a different information signal rate. The subscriber unit has a capability of communicating with a dynamically changing a transmission rate of an information signal which includes multiple spread spectrum message channels. The system includes a closed loop power control system for maintaining a minimum system transmit power level for a radio carrier station and the subscriber units, and system capacity management for maintaining a maximum number of active subscriber units for improved system performance.

Code division multiple access (CDMA) communication system

In a communication system capable of variable rate transmission, scheduling of high speed data transmission improves utilization of the forward link and decreases the transmission delay in data communication. Each remote station is assigned one primary code channel for the duration of the communication with a cell. Secondary code channels of various types and transmission capabilities can be assigned by a channel scheduler for scheduled transmission of data traffic at high rates. Secondary code channels are assigned in accordance with a set of system goals, a list of parameters, and collected information on the status of the communication network. Secondary code channels can be grouped into sets of secondary code channels. Data is partitioned in data frames and transmitted over the primary and secondary code channels which have been assigned to the scheduled user.

Method and apparatus for forward link rate scheduling

A mobile station communicates with both a cellular network, by which it is assigned a mobile identification number, and to a cordless cellular base station utilizing the same cellular frequency range and communications protocol. The cordless cellular base station is preferably connected to a public switched telephone network and is assigned a landline number. The cordless cellular base station acts as a conduit between the mobile station and the public switched telephone network. When the mobile station comes within range of a cordless cellular base station, it deregisters automatically from the cellular network and register with the cordless cellular base station. Once the mobile station is communicating with the cordless cellular base station, the cordless cellular base station communicates with the cellular network to instruct the cellular network to route all calls for mobile identification number to the cordless cellular base station's landline number. In addition, all calls placed on the mobile station are sent through the cordless cellular base station to the public switched telephone network. When the mobile station severs contact with the cordless cellular base station, the mobile station registers with the regional cellular base station of the regional cellular network. The cordless cellular base station then sends a network forwarding cancellation message to the cellular network to cancel the forwarding of calls for the mobile station's identification number. Once the mobile station is registered with the regional cell, calls to the mobile stations identification number are directly routed by the cellular network to the mobile station.

Cordless cellular system

A system for rapidly acquiring a spreading code, used in a code division multiple access (CDMA) system, comprises a generator for generating a first long code and a second long code, with each long code having a length of N chips. The first long code is different from the second long code. A transmitter transmits the first long code and the second long code at a first phase angle and at a second phase angle, respectively, on a carrier signal over a communications channel using radio waves. The first long code and the second long code may be transmitted at an in-phase (I) angle and at a quadrature-phase (Q) angle, respectively, on the carrier signal. From the communications channel, an I acquisition circuit and a Q acquisition circuit may acquire, in parallel, the first long code and the second long code from the I angle and the Q angle, respectively, of the carrier signal by searching, in parallel, N/2 chips of the first long code and the second long code.

System for using rapid acquisition spreading codes for spread-spectrum communications

Power control in a base to mobile link of a mobile radio system is effected by measuring the carrier/interference ratio at each mobile station and transmitting information thereof, usually in terms of the inverse of that ratio, to the base station. Power is shared between the traffic channels which are active by assigning fractions thereto utilizing a power control factor as the coefficient typical of the channel and depending on the ratios for all of the stations, on the number of active channels, on whether or not there have been variations in the active channels relative to a preceding interval and on the power assigned to the channel in the preceding interval.

Eros Gaiani

Papers

Method and device for power control in the base-to-mobile link of a mobile radio system with code division multiple access