scispace - formally typeset
Patent

Method and device for power control in the base-to-mobile link of a mobile radio system with code division multiple access

TLDR
In this paper, power control in a base to mobile link of a mobile radio system is effected by measuring the carrier/interference ratio at each mobile station and transmitting information thereof, usually in terms of the inverse of that ratio, to the base station.
Abstract
Power control in a base to mobile link of a mobile radio system is effected by measuring the carrier/interference ratio at each mobile station and transmitting information thereof, usually in terms of the inverse of that ratio, to the base station. Power is shared between the traffic channels which are active by assigning fractions thereto utilizing a power control factor as the coefficient typical of the channel and depending on the ratios for all of the stations, on the number of active channels, on whether or not there have been variations in the active channels relative to a preceding interval and on the power assigned to the channel in the preceding interval.

read more

Citations
More filters
Patent

Method and apparatus for high-rate packet data transmission

TL;DR: In this article, the data packets can be transmitted out of sequence by the use of sequence number to identify each data unit within the data packet, which results in retransmission of the received in error.
Patent

Code division multiple access (CDMA) communication system

TL;DR: In this article, a closed loop power control system for maintaining a minimum system transmit power level for a radio carrier station and the subscriber units, and system capacity management for maintaining the maximum number of active subscriber units for improved system performance.
Patent

Method and apparatus for forward link rate scheduling

TL;DR: In this article, the scheduling of high speed data transmission improves utilization of the forward link and decreases the transmission delay in data communication in a communication system capable of variable rate transmission, each remote station is assigned one primary code channel for the duration of the communication with a cell.
Patent

Cordless cellular system

TL;DR: In this article, a mobile station communicates with both a cellular network, by which it is assigned a mobile identification number, and to a cordless cellular base station utilizing the same cellular frequency range and communications protocol.
Patent

System for using rapid acquisition spreading codes for spread-spectrum communications

TL;DR: In this article, the first long code and the second long code are transmitted at an in-phase (I) and at a quadrature-phase(Q) angle, respectively, on the carrier signal using radio waves.
References
More filters
Journal ArticleDOI

On the capacity of a cellular CDMA system

TL;DR: In this paper, the interference-suppression feature of CDMA (code division multiple access) can result in a many-fold increase in capacity over analog and even over competing digital techniques.
Patent

Method and apparatus for controlling transmission power in a CDMA cellular mobile telephone system

TL;DR: A power control system for a cellular mobile telephone system in which system users communicate information signals between one another via at least one cell-site using code division multiple access spread spectrum communication signals is described in this paper.
Patent

Spread spectrum transmitter power control method and system

TL;DR: A power control system for a cellular mobile telephone system in which system users communicate information signals between one another via at least one cell site using code division multiple access spread spectrum communication signals is presented in this paper.
Patent

Method and apparatus for dynamic power control in TDMA portable radio systems

TL;DR: In this article, the uplink power transmitted by the transmitter of a portable unit to a fixed port is dynamically controlled by monitoring three measures in each uplink burst received by the port.
Patent

Transmission power control device in a radio communication transmitting/receiving station

TL;DR: In this paper, the power transmitted by an R.F. transmitting and receiving station, such as a mobile station, to a fixed base station, is controlled as a function of power received by the mobile station to obtain a constant receiving power level in the fixed station despite variations in the relative location of the stations.