This chapter has four main aims. Provide a comprehensive picture of the composition of volcanic rocks from subduction-related magmatic arcs. Review evidence in favor of the existence of andesitic, as well as basaltic primary magmas in arcs. Present new data on the composition of arc lower crust, based mainly on our work on the Talkeetna arc section in southcentral Alaska. Summarize evidence from arc lower crustal sections that a substantial proportion of the dense, lower crustal pyroxenites and garnet granulites produced by crystal fractionation are missing.

One View of the Geochemistry of Subduction-Related Magmatic Arcs, with an Emphasis on Primitive Andesite and Lower Crust

http://www.geo.mtu.edu/EHaz/ConvergentPlatesClass/macpherson/macpherson_etal_2006.pdf

Adakites without slab melting: High pressure differentiation of island arc magma, Mindanao, the Philippines

Porphyry Cu-(Mo-Au) deposits are relatively rare but reproducible products of subduction-related magmatism. No unique processes appear to be required for their formation, although additive combinations of common tectono-magmatic processes, or optimization of these processes, can affect the grade and size as well as the location of the resulting deposits. These various contributing processes are reviewed, from partial melting in the mantle wedge overlying the subducting plate, through processes of magma interaction with the lithosphere, to mechanisms for magma emplacement and volatile exsolution in the upper crust. Specific ore-forming processes, such as magmatic-hydrothermal fluid evolution, are not discussed. Hot, hydrous, relatively oxidized, sulfur-rich mafic magmas (predominantly basalts) generated in the metasomatized mantle wedge above a subducting oceanic slab rise buoyantly to the base of the overlying crust where they stall due to density contrasts. Because these magmas are oxidized, sulfur is dominantly present as sulfate, and chalcophile elements such as Cu and Au are incompatible (i.e., they are retained in the melt). As these magmas begin to crystallize they release heat which causes partial melting of crustal rocks. Mixing between crustal- and mantle-derived magmas yields evolved (andesitic to dacitic), volatile-rich, metalliferous, hybrid magmas, which are of sufficiently low density to rise through the crust. Magma ascent is driven primarily by buoyancy forces and is dominantly a fracture-controlled phenomenon. As such, crustal stress and strain patterns play an important role in guiding the ascent of magma from the lower crust. In particular, translithospheric, orogen-parallel, strike-slip structures serve as a primary control on magma emplacement in many volcanic arcs worldwide. A feedback mechanism operates, whereby preexisting faults facilitate magma ascent, the heat from which further weakens the crust and focuses strain. Certain structural geometries, such as fault jogs, step-overs, and fault intersections, offer low-stress extensional volumes during transpressional strain. Such sites represent vertical conduits of relatively high permeability, up which magmas will preferentially ascend. Large upper crustal plutonic complexes may therefore be localized within these structural settings. Having delivered a sufficient volume of evolved, fertile arc magma to a focused position in the upper crust, magmatic fractionation, recharge, and volatile exsolution lead to the development of ore-forming magmatic-hydrothermal systems. To a first approximation, the size of the resulting deposit will be limited by the magma volume delivered to the upper crustal magma chamber. System-specific details such as magmatic-hydrothermal evolution, the nature of the country rocks, and subsequent erosional and weathering history will ultimately control the value of the deposit, but these factors fall outside the scope of this paper.

Tectono-Magmatic Precursors for Porphyry Cu-(Mo-Au) Deposit Formation

Based on a compilation of published sources, rocks referred to as adakites show the following geochemical and isotopic characteristics: SiO2 ≥56 wt percent, Al2O3 ≥15 wt percent, MgO normally <3 wt percent, Mg number ≈0.5, Sr ≥400 ppm, Y ≤18 ppm, Yb ≤1.9 ppm, Ni ≥20 ppm, Cr ≥30 ppm, Sr/Y ≥20, La/Yb ≥20, and 87Sr/86Sr ≤0.7045. Rocks with such compositions have been interpreted to be the products of hybridization of felsic partial melts from subducting oceanic crust with the peridotitic mantle wedge during ascent and are not primary magmas. High Mg andesites have been interpreted to be related to adakites by partial melting of asthenospheric peridotite contaminated by slab melts. The case for these petrogenetic models for adakites and high Mg andesites is best made in the Archean, when higher mantle geotherms resulted in subducting slabs potentially reaching partial melting temperatures at shallow depths before dehydration rendered the slab infusible. In the Phanerozoic these conditions were likely only met under certain special tectonic conditions, such as subduction of young (≤25-m.y.-old) oceanic crust.

Key adakitic geochemical signatures, such as low Y and Yb concentrations and high Sr/Y and La/Yb ratios, can be generated in normal asthenosphere-derived tholeiitic to calc-alkaline arc magmas by common upper plate crustal interaction and crystal fractionation processes and do not require slab melting. An assessment of several arc volcanic suites from around the world shows that most adakite-like compositions are generated in this way and do not reflect source processes. Similarly, rare adakite-like intrusive rocks associated with some porphyry Cu deposits are the evolved products of extensive crustal-level processing of calc-alkaline basalt-andesite-dacite-rhyolite series magmas. If slab melts contribute to such magmas, their geochemical signatures would have been obliterated or rendered ambiguous by subsequent extensive open-system processes. In Archean terranes, where adakitic and high Al tonalite-trondhjemite-granodiorite (TTG) magma series rocks are more common, porphyry Cu deposits are rare and, where found, are associated with normal calc-alkaline suites rather than adakites. The two different magma series are compositionally distinct in terms of several major and trace element parameters.

Common upper plate magmatic processes such as melting-assimilation-storage-homogenization (MASH) and assimilation-fractional-crystallization (AFC) affecting normal arc magmas can be demonstrated to explain the distinctive compositions of most adakite-like arc rocks, including high Mg andesites and especially those rare examples associated with porphyry Cu deposits. In contrast, slab melting can in most cases neither be proved nor disproved and is therefore unsatisfactory as a unique factor in porphyry Cu genesis.

Special Paper: Adakite-Like Rocks: Their Diverse Origins and Questionable Role in Metallogenesis

http://www2.ess.ucla.edu/~manning/pdfs/m04.pdf

The chemistry of subduction-zone fluids

Most island-arc magmatism appears to result from the lowering of the melting point of peridotite within the wedge of mantle above subducting slabs owing to the introduction of fluids from the dehydration of subducting oceanic crust. Volcanic rocks interpreted to contain a component of melt (not just a fluid) from the subducting slab itself are uncommon, but possible examples have been recognized in the Aleutian islands, Baja California, Patagonia and elsewhere. The geochemically distinctive rocks from these areas, termed 'adakites, are often associated with subducting plates that are young and warm, and therefore thought to be more prone to melting. But the subducting lithosphere in some adakite locations (such as the Aleutian islands) appears to be too old and hence too cold to melt. This implies either that our interpretation of adakite geochemistry is incorrect, or that our understanding of the tectonic context of adakites is incomplete. Here we present geochemical data from the Kamchatka peninsula and the Aleutian islands that reaffirms the slab-melt interpretation of adakites, but in the tectonic context of the exposure to mantle flow around the edge of a torn subducting plate. We conclude that adakites are likely to form whenever the edge of a subducting plate is warmed or ablated by mantle flow. The use of adakites as tracers for such plate geometry may improve our understanding of magma genesis and thermal structure in a variety of subduction-zone environments.

https://www.eri.u-tokyo.ac.jp/people/ichihara/vp2009plan/YogodzinskiLees_etal_2001Nature.pdf

Geochemical evidence for the melting of subducting oceanic lithosphere at plate edges

Major and trace element and Sr–Nd–Pb isotopic variations in of melting changes from >20% at the arc front to <10% below mafic volcanic rocks hve been studied in a 220 km transect across the back-arc region. The rocks from volcanoes of the northern part the Kamchatka arc from the Eastern Volcanic Front, over the Central of the Central Kamchatka Depression—to the north of the transect Kamchatka Depression to the Sredinny Ridge in the back-arc. considered in this study—are significantly different in their trace Thirteen volcanoes and lava fields, from 110 to 400 km above the element compositions compared with the other rocks of the transect subducted slab, were sampled. This allows us to characterize spatial and their source appears to have been enriched by a component variations and the relative amount and composition of the slab derived from melting of the edge of the ruptured slab. fluid involved in magma genesis. Typical Kamchatka arc basalts, normalized for fractionation to 6% MgO, display a strong increase in large ion lithophile, light rare earth and high field strength

/pdf/sources-and-fluids-in-the-mantle-wedge-below-kamchatka-2ijius4r7q.pdf

F. Dorendorf

Papers

Geochemical evidence for the melting of subducting oceanic lithosphere at plate edges

Sources and Fluids in the Mantle Wedge below Kamchatka, Evidence from Across-arc Geochemical Variation

Late Pleistocene to Holocene activity at Bakening volcano and surrounding monogenetic centers (Kamchatka): volcanic geology and geochemical evolution