http://spiral.imperial.ac.uk/bitstream/10044/1/66422/2/Metal%203D%20printing%20in%20construction%20-%20LG.pdf

Metal 3D printing in construction: A review of methods, research, applications, opportunities and challenges

Fused deposition modelling (FDM) is one of the fastest-growing additive manufacturing methods used in printing fibre-reinforced composites (FRC). The performances of the resulting printed parts are limited compared to those by other manufacturing methods due to their inherent defects. Hence, the effort to develop treatment methods to overcome these drawbacks has accelerated during the past few years. The main focus of this study is to review the impact of those defects on the mechanical performance of FRC and therefore to discuss the available treatment methods to eliminate or minimize them in order to enhance the functional properties of the printed parts. As FRC is a combination of polymer matrix material and continuous or short reinforcing fibres, this review will thoroughly discuss both thermoplastic polymers and FRCs printed via FDM technology, including the effect of printing parameters such as layer thickness, infill pattern, raster angle and fibre orientation. The most common defects on printed parts, in particular, the void formation, surface roughness and poor bonding between fibre and matrix, are explored. An inclusive discussion on the effectiveness of chemical, laser, heat and ultrasound treatments to minimize these drawbacks is provided by this review.

FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments.

Additive manufacturing of ceramics for dental applications: A review.

On the environmental impacts of 3D printing technology

A bibliometric analysis of the research dealing with the impact of additive manufacturing on industry, business and society.

Automotive industry faces new challenges every day, new design trends and technological deployments from research push companies to develop new models and facelifts in short term, requiring new tools or tool reshaping. Concerning the current world economic scenario, decreasing time for tooling up becomes as important as decreasing time-to-market. Such scenario opens up the horizons for new manufacturing approaches like additive manufacturing, in this case, applied for tooling up a stamping process on the automotive industry for the production of body panels. This approach enables the manufacturing of stamping inserts using similar high performance alloy steel as in conventional tooling, therefore, without losing tool mechanical properties. The stamping tools produced were tested by an automotive company in order to determine tool behaviour under real operating conditions, considering the high level demands of the stamping process. The results obtained enabled to conclude that metal additive manufacturing provided tools for the stamping process with excellent performance with a significant decrease on time-to-tooling.

F. Romeiro

Papers

Additive manufacturing tooling for the automotive industry