The hydrogen bond is the most important of all directional intermolecular interactions. It is operative in determining molecular conformation, molecular aggregation, and the function of a vast number of chemical systems ranging from inorganic to biological. Research into hydrogen bonds experienced a stagnant period in the 1980s, but re-opened around 1990, and has been in rapid development since then. In terms of modern concepts, the hydrogen bond is understood as a very broad phenomenon, and it is accepted that there are open borders to other effects. There are dozens of different types of X-H.A hydrogen bonds that occur commonly in the condensed phases, and in addition there are innumerable less common ones. Dissociation energies span more than two orders of magnitude (about 0.2-40 kcal mol(-1)). Within this range, the nature of the interaction is not constant, but its electrostatic, covalent, and dispersion contributions vary in their relative weights. The hydrogen bond has broad transition regions that merge continuously with the covalent bond, the van der Waals interaction, the ionic interaction, and also the cation-pi interaction. All hydrogen bonds can be considered as incipient proton transfer reactions, and for strong hydrogen bonds, this reaction can be in a very advanced state. In this review, a coherent survey is given on all these matters.

The hydrogen bond in the solid state.

Shape memory polymer compositions, articles of manufacture thereof, and methods of preparation and use thereof are described. The shape memory polymer compositions can hold more than one shape in memory. Suitable compositions include at least one hard segment and at least one soft segment. The Ttrans of the hard segment is preferably between -30 and 270 °C. At least one of the hard or soft segments can contain a cross-linkable group, and the segments can be linked by formation of an interpenetrating network or a semi-interpenetrating network, or by physical interactions of the blocks. Objects can be formed into a given shape at a temperature above the Ttrans of the hard segment, and cooled to a temperature below the Ttrans of the soft segment. If the object is subsequently formed into a second shape, the object can return to its original shape by heating the object above the Ttrans of the soft segment and below the Ttrans of the hard segment. The compositions can also include two soft segments which are linked via functional groups which are cleaved in response to application of light, electric field, magnetic field or ultrasound. The cleavage of these groups causes the object to return to its original shape.

/pdf/shape-memory-polymers-21sug7mu2l.pdf

Shape memory polymers

Supramolecular polymers can be random and entangled coils with the mechanical properties of plastics and elastomers, but with great capacity for processability, recycling, and self-healing due to their reversible monomer-to-polymer transitions. At the other extreme, supramolecular polymers can be formed by self-assembly among designed subunits to yield shape-persistent and highly ordered filaments. The use of strong and directional interactions among molecular subunits can achieve not only rich dynamic behavior but also high degrees of internal order that are not known in ordinary polymers. They can resemble, for example, the ordered and dynamic one-dimensional supramolecular assemblies of the cell cytoskeleton and possess useful biological and electronic functions.

/pdf/functional-supramolecular-polymers-3wt4hbf4y0.pdf

Functional Supramolecular Polymers

Rubbers exhibit enormous extensibility up to several hundred per cent, compared with a few per cent for ordinary solids, and have the ability to recover their original shape and dimensions on release of stress. Rubber elasticity is a property of macromolecules that are either covalently cross-linked or connected in a network by physical associations such as small glassy or crystalline domains, ionic aggregates or multiple hydrogen bonds. Covalent cross-links or strong physical associations prevent flow and creep. Here we design and synthesize molecules that associate together to form both chains and cross-links via hydrogen bonds. The system shows recoverable extensibility up to several hundred per cent and little creep under load. In striking contrast to conventional cross-linked or thermoreversible rubbers made of macromolecules, these systems, when broken or cut, can be simply repaired by bringing together fractured surfaces to self-heal at room temperature. Repaired samples recuperate their enormous extensibility. The process of breaking and healing can be repeated many times. These materials can be easily processed, re-used and recycled. Their unique self-repairing properties, the simplicity of their synthesis, their availability from renewable resources and the low cost of raw ingredients (fatty acids and urea) bode well for future applications.

Self-healing and thermoreversible rubber from supramolecular assembly

III. Foldamer Research 3910 A. Overview 3910 B. Motivation 3910 C. Methods 3910 D. General Scope 3912 IV. Peptidomimetic Foldamers 3912 A. The R-Peptide Family 3913 1. Peptoids 3913 2. N,N-Linked Oligoureas 3914 3. Oligopyrrolinones 3915 4. Oxazolidin-2-ones 3916 5. Azatides and Azapeptides 3916 B. The â-Peptide Family 3917 1. â-Peptide Foldamers 3917 2. R-Aminoxy Acids 3937 3. Sulfur-Containing â-Peptide Analogues 3937 4. Hydrazino Peptides 3938 C. The γ-Peptide Family 3938 1. γ-Peptide Foldamers 3938 2. Other Members of the γ-Peptide Family 3941 D. The δ-Peptide Family 3941 1. Alkene-Based δ-Amino Acids 3941 2. Carbopeptoids 3941 V. Single-Stranded Abiotic Foldamers 3944 A. Overview 3944 B. Backbones Utilizing Bipyridine Segments 3944 1. Pyridine−Pyrimidines 3944 2. Pyridine−Pyrimidines with Hydrazal Linkers 3945

A field guide to foldamers.

Units of 2-ureido-4-pyrimidone that dimerize strongly in a self-complementary array of four cooperative hydrogen bonds were used as the associating end group in reversible self-assembling polymer systems. The unidirectional design of the binding sites prevents uncontrolled multidirectional association or gelation. Linear polymers and reversible networks were formed from monomers with two and three binding sites, respectively. The thermal and environmental control over lifetime and bond strength makes many properties, such as viscosity, chain length, and composition, tunable in a way not accessible to traditional polymers. Hence, polymer networks with thermodynamically controlled architectures can be formed, for use in, for example, coatings and hot melts, where a reversible, strongly temperature-dependent rheology is highly advantageous.

/pdf/reversible-polymers-formed-from-self-complementary-monomers-4uj4px22ts.pdf

Reversible Polymers Formed from Self-Complementary Monomers Using Quadruple Hydrogen Bonding

6-Methyl-2-butylureidopyrimidone dimerizes via four hydrogen bonds in the solid state as well as in CHCl3 solution via a donor−donor−acceptor−acceptor (DDAA) array of hydrogen bonding sites in the 4[1H]-pyrimidinone tautomer. An intramolecular hydrogen bond from the pyrimidine NH group to the urea oxygen atom preorganizes the molecules for dimerization. The dimerization constant of the dimer in CHCl3 exceeds 106 M-1. In CHCl3 containing DMSO, the dimer is in equilibrium with the monomeric 6[1H]-pyrimidinone tautomer. In 6-phenyl-2-butylureidopyrimidone, the 4[1H]-pyrimidinone tautomer coexists with the pyrimidin-4-ol form, which dimerizes with similar high dimerization constants via four hydrogen bonds in a DADA array. The latter tautomer predominates in derivatives with electronegative 6-substituents, like 6-nitrophenyl- and 6-trifluoromethyl-2-butylureidopyrimidone. Due to its simple preparation and high dimerization constant, the ureidopyrimidone functionality is a useful building block for supramolecu...

Strong dimerization of ureidopyrimidones via quadruple hydrogen bonding

Highly stable dimers are formed in solution and in the solid state by a class of readily synthesized, self-complementary building blocks for supramolecular chemistry, which associate through a donor-acceptor-donor-acceptor array of four hydrogen-bonding sites. An additional intramolecular hydrogen bond in the compound whose crystal structure is shown on the right preorganizes the molecule for dimerization.

Self-Complementarity Achieved through Quadruple Hydrogen Bonding

Telechelic oligo- and poly(dimethylsiloxanes) 1 and 2, with two ureidopyrimidone (UPy) functional groups, have been prepared via a hydrosilylation reaction. The compounds have been characterized in solution by 1H NMR and viscometry and in the solid state by 1H NMR and 13C NMR, FTIR, and rheology measurements. The measurements show that the UPy groups of 1 and 2 are associated via quadruple hydrogen bonds in a donor−donor−acceptor−acceptor (DDAA) array. In many aspects, the materials behave like entangled, high molecular weight polymers. Compound 2 has a Tg at −119 °C and shows melting of microcrystalline domains of associated UPy units at −25 °C. Compound 1 has a crystalline form (Tm = 112 °C) and an amorphous modification with a Tg of 25 °C. Solid-state NMR was used to investigate the mobility of these phases. WISE spectra show a higher mobility of the UPy groups in the amorphous phase than in the crystals of 1. Amorphous 1 and 2 behave like entangled polymers. Their mechanical behavior is characterized ...

Supramolecular polymers from linear telechelic siloxanes with quadruple- hydrogen- bonded units

The association behavior of several 2,4-diamino-s-triazines, 2,6-diaminopyridines, and their acylated derivatives with uracil derivatives was studied. In solution (1)H-NMR and IR spectroscopy were used, and in the solid state as (co)crystals X-ray diffraction was used. Acylation of 2,6-diaminopyridine leads to an increase of the association constant in CDCl(3) of the complexes with N-propylthymine from 84 to 440-920 M(-)(1), whereas acylation of diamino-s-triazines leads to a dramatic fall in the association constant of the complexes with N-propylthymine from 890 to ca. 6 M(-)(1). This phenomenon is related to different conformational preferences of these compounds. The amide groups in bis(acylamino)pyridines prefer a trans conformation, with the carbonyl group anti with respect to the ring nitrogen and coplanar with the aromatic ring. The amides of bis(acylamino)triazines, however, reside predominantly in a cis conformation. Repulsive secondary electrostatic interactions between the cis-amide and uracil carbonyl groups are thought to be responsible for the low association constant of complexes of bis(acylamino)triazines with uracils. The relatively high dimerization constants of bis(acylamino)triazines have been rationalized by the strong tendency to dimerize via quadruple hydrogen bonding.

/pdf/hydrogen-bonded-complexes-of-diaminopyridines-and-i49yjwf53k.pdf

Felix Hugo Beijer

Papers

Reversible Polymers Formed from Self-Complementary Monomers Using Quadruple Hydrogen Bonding

Strong dimerization of ureidopyrimidones via quadruple hydrogen bonding

Self-Complementarity Achieved through Quadruple Hydrogen Bonding

Supramolecular polymers from linear telechelic siloxanes with quadruple- hydrogen- bonded units

Hydrogen-Bonded Complexes of Diaminopyridines and Diaminotriazines: Opposite Effect of Acylation on Complex Stabilities.