A smooth, ultra-flexible, and transparent electrode was developed from silver nanowires (AgNWs) embedded in a colorless polyimide (cPI) by utilizing an inverted film-processing method. The resulting AgNW-cPI composite electrode had a transparency of >80%, a low sheet resistance of 8 Ω/□, and ultra-smooth surfaces comparable to glass. Leveraging the robust mechanical properties and flexibility of cPI, the thickness of the composite film was reduced to less than 10 μm, which is conducive to extreme flexibility. This film exhibited mechanical durability, for both outward and inward bending tests, up to a bending radius of 30 μm, while maintaining its electrical performance under cyclic bending (bending radius: 500 μm) for 100,000 iterations. Phosphorescent, blue organic light-emitting diodes (OLEDs) were fabricated using these composites as bottom electrodes (anodes). Hole-injection was poor, because AgNWs were largely buried beneath the composite's surface. Thus, we used a simple plasma treatment to remove the thin cPI layer overlaying the nanowires without introducing other conductive materials. As a result, we were able to finely control the flexible OLEDs' electroluminescent properties using the enlarged conductive pathways. The fabricated flexible devices showed only slight performance reductions of <3% even after repeated foldings with a 30 μm bending radius.

/pdf/ultra-thin-and-smooth-transparent-electrode-for-flexible-and-1qx4p0fdj2.pdf

Ultra-thin and smooth transparent electrode for flexible and leakage-free organic light-emitting diodes

This is a review on recent developments in the field of transparent conductive coatings (TCCs) for ITO replacement. The review describes the basic properties of conductive nanomaterials suitable for fabrication of such TCCs (metallic nanoparticles and nanowires, carbon nanotubes and graphene sheets), various methods of patterning the metal nanoparticles with formation of conductive transparent metallic grids, honeycomb structures and 2D arrays of interconnected rings as well as fabrication of TCCs based on graphene and carbon nanotubes. Applications of TCCs in electronic and optoelectronic devices, such as solar cells, electroluminescent and electrochromic devices, touch screens and displays, and transparent EMI shielders, are discussed.

Transparent conductors composed of nanomaterials

Networks of silver nanowires appear set to replace expensive indium tin oxide as the transparent conducting electrode material in next generation devices. The success of this approach depends on optimizing the material conductivity, which until now has largely focused on minimizing the junction resistance between wires. However, there have been no detailed reports on what the junction resistance is, nor is there a known benchmark for the minimum attainable sheet resistance of an optimized network. In this paper, we present junction resistance measurements of individual silver nanowire junctions, producing for the first time a distribution of junction resistance values and conclusively demonstrating that the junction contribution to the overall resistance can be reduced beyond that of the wires through standard processing techniques. We find that this distribution shows the presence of a small percentage (6%) of high-resistance junctions, and we show how these may impact the performance of network-based materials. Finally, through combining experiment with a rigorous model, we demonstrate the important role played by the network skeleton and the specific connectivity of the network in determining network performance.

/pdf/resistance-of-single-ag-nanowire-junctions-and-their-role-in-1da2lv2yfz.pdf

Resistance of Single Ag Nanowire Junctions and Their Role in the Conductivity of Nanowire Networks.

The great potential of solution-processed metal nanowire networks utilized as a transparent electrode has attracted much attention in the last years Typically, silver nanowires are applied, although their replacement by more abundant and cheaper materials is of interest Here, a hydrazine-free synthesis route for high aspect ratio copper nanowires is used to prepare conductive networks showing an enhanced electrode performance The network deposition is done with a scalable spray-coating process on glass and on polymer foils By a pressing or an annealing step, highly conductive transparent electrodes are obtained, and they reveal transmittance-resistance values similar to indium tin oxide (ITO) and networks made of silver nanowires The application potential of the copper nanowire electrodes is demonstrated by integrating them into an evaporated small-molecule organic solar cell with 3% efficiency

ITO‐Free, Small‐Molecule Organic Solar Cells on Spray‐Coated Copper‐Nanowire‐Based Transparent Electrodes

A method for direct inkjet printing of silver nanowire (Ag NW) to form transparent conductive network as the top electrode for inverted semi-transparent organic photovoltaic devices (OPV) was developed. The highest power conversion efficiency of the poly(3-hexylthiophene):phenyl-C61–butyric acid methyl ester (P3HT:PC61BM) based OPV was achieved to be 2.71% when the top electrode was formed by 7 times of printing. In general, devices with printed Ag NW top electrode had similar open-circuit voltage (VOC, around 0.60 V) but lower fill factor (FF, 0.33–0.54) than that of device with thermally deposited Ag opaque electrode (reference device). Both FF and short-circuit current density (JSC), however, were found to be increasing with the increase of printing times (3, 5, and 7), which could be partially attributed to the improved conductivity of Ag NW network electrodes. The solvent effect on device performances was studied carefully by comparing the current density-voltage (J-V) curves of different devices. Th...

Fritz Lehnert

Papers

Transparent, dip-coated silver nanowire electrodes for small molecule organic solar cells