Learn the basic properties and designs of modern VLSI devices, as well as the factors affecting performance, with this thoroughly updated second edition. The first edition has been widely adopted as a standard textbook in microelectronics in many major US universities and worldwide. The internationally-renowned authors highlight the intricate interdependencies and subtle tradeoffs between various practically important device parameters, and also provide an in-depth discussion of device scaling and scaling limits of CMOS and bipolar devices. Equations and parameters provided are checked continuously against the reality of silicon data, making the book equally useful in practical transistor design and in the classroom. Every chapter has been updated to include the latest developments, such as MOSFET scale length theory, high-field transport model, and SiGe-base bipolar devices.

/pdf/fundamentals-of-modern-vlsi-devices-471xd7l9pf.pdf

Fundamentals of Modern VLSI Devices

The various arguments for introducing optical interconnections to silicon CMOS chips are summarized, and the challenges for optical, optoelectronic, and integration technologies are discussed. Optics could solve many physical problems of interconnects, including precise clock distribution, system synchronization (allowing larger synchronous zones, both on-chip and between chips), bandwidth and density of long interconnections, and reduction of power dissipation. Optics may relieve a broad range of design problems, such as crosstalk, voltage isolation, wave reflection, impedence matching, and pin inductance. It may allow continued scaling of existing architectures and enable novel highly interconnected or high-bandwidth architectures. No physical breakthrough is required to implement dense optical interconnects to silicon chips, though substantial technological work remains. Cost is a significant barrier to practical introduction, though revolutionary approaches exist that might achieve economies of scale. An Appendix analyzes scaling of on-chop global electrical interconnects, including line inductance and the skin effect, both of which impose significant additional constraints on future interconnects.

/pdf/rationale-and-challenges-for-optical-interconnects-to-5clh2238g9.pdf

Rationale and challenges for optical interconnects to electronic chips

Performance of deep-submicrometer very large scale integrated (VLSI) circuits is being increasingly dominated by the interconnects due to decreasing wire pitch and increasing die size. Additionally, heterogeneous integration of different technologies in one single chip is becoming increasingly desirable, for which planar (two-dimensional) ICs may not be suitable. This paper analyzes the limitations of the existing interconnect technologies and design methodologies and presents a novel three-dimensional (3-D) chip design strategy that exploits the vertical dimension to alleviate the interconnect related problems and to facilitate heterogeneous integration of technologies to realize a system-on-a-chip (SoC) design. A comprehensive analytical treatment of these 3-D ICs has been presented and it has been shown that by simply dividing a planar chip into separate blocks, each occurring a separate physical level interconnected by short and vertical interlayer interconnects (VILICs), significant improvement in performance and reduction in wire-limited chip area can be achieved, without the aid of any other circuit or design innovations. A scheme to optimize the interconnect distribution among different interconnect tiers is presented and the effect of transferring the repeaters to upper Si layers has been quantified in this analysis for a two-layer 3-D chip. Furthermore, one of the major concerns in 3-D ICs arising due to power dissipation problems has been analyzed and an analytical model has been presented to estimate the temperatures of the different active layers. It is demonstrated that advancement in heat sinking technology will be necessary in order to extract maximum performance from these chips. Implications of 3-D device architecture on several design issues have also been discussed with special attention to SoC design strategies. Finally some of the promising technologies for manufacturing 3-D ICs have been outlined.

/pdf/3-d-ics-a-novel-chip-design-for-improving-deep-submicrometer-6k9by1rs19.pdf

3-D ICs: a novel chip design for improving deep-submicrometer interconnect performance and systems-on-chip integration

Starting with a brief review on 0.1-/spl mu/m (100 nm) CMOS status, this paper addresses the key challenges in further scaling of CMOS technology into the nanometer (sub-100 nm) regime in light of fundamental physical effects and practical considerations. Among the issues discussed are: lithography, power supply and threshold voltage, short-channel effect, gate oxide, high-field effects, dopant number fluctuations and interconnect delays. The last part of the paper discusses several alternative or unconventional device structures, including silicon-on-insulator (SOI), SiGe MOSFET's, low-temperature CMOS, and double-gate MOSFET's, which may lead to the outermost limits of silicon scaling.

CMOS scaling into the nanometer regime

Twenty-first century opportunities for GSI will be governed in part by a hierarchy of physical limits on interconnects whose levels are codified as fundamental, material, device, circuit, and system. Fundamental limits are derived from the basic axioms of electromagnetic, communication, and thermodynamic theories, which immutably restrict interconnect performance, energy dissipation, and noise reduction. At the material level, the conductor resistivity increases substantially in sub-50-nm technology due to scattering mechanisms that are controlled by quantum mechanical phenomena and structural/morphological effects. At the device and circuit level, interconnect scaling significantly increases interconnect crosstalk and latency. Reverse scaling of global interconnects causes inductance to influence on-chip interconnect transients such that even with ideal return paths, mutual inductance increases crosstalk by up to 60% over that predicted by conventional RC models. At the system level, the number of metal levels explodes for highly connected 2-D logic megacells that double in size every two years such that by 2014 the number is significantly larger than ITRS projections. This result emphasizes that changes in design, technology, and architecture are needed to cope with the onslaught of wiring demands. One potential solution is 3-D integration of transistors, which is expected to significantly improve interconnect performance. Increasing the number of active layers, including the use of separate layers for repeaters, and optimizing the wiring network, yields an improvement in interconnect performance of up to 145% at the 50-nm node.

/pdf/interconnect-limits-on-gigascale-integration-gsi-in-the-21st-4iloxnfjg6.pdf

Interconnect limits on gigascale integration (GSI) in the 21st century

Based on a first order cycle time model performance trends and limits are projected for both bipolar and CMOS processors. The key in identifying trends is the understanding of the pivotal factors at any given stage of technology progression. One such parameter is the physical area of the processor. In coming technologies there will be opposite demands placed on the system's area stemming from a need to reduce the proportion of interconnection capacitance and to send signals across the processor. Contrary to the usual perception, delays resulting from wiring capacitance decrease if processor area increases, while the minimization of signal travel times favors reducing area. The system size tradeoff in the case of bipolar processors is primarily determined by power density, while CMOS processor sizes are determined by wirability requirements. To achieve the full potential of CMOS, interconnections will have to be carefully planned. The performance limits of bipolar and room temperature CMOS uniprocessors are shown to be very similar. The highest performance technology on the horizon is liquid nitrogen temperature CMOS. Alternate technologies, based on III-V compound devices, or more exotic quantum structures, are not expected to play a role in future general-purpose high-end systems. >

G.A. Sai-Halasz

Papers

Performance trends in high-end processors