The aim of this paper is to present a review of current control techniques for three-phase voltage-source pulsewidth modulated converters. Various techniques, different in concept, have been described in two main groups: linear and nonlinear. The first includes proportional integral (stationary and synchronous) and state feedback controllers, and predictive techniques with constant switching frequency. The second comprises bang-bang (hysteresis, delta modulation) controllers and predictive controllers with on-line optimization. New trends in current control-neural networks and fuzzy-logic-based controllers-are discussed, as well. Selected oscillograms accompany the presentation in order to illustrate properties of the described controller groups.

Current control techniques for three-phase voltage-source PWM converters: a survey

The matrix converter is an array of controlled semiconductor switches that connects directly the three-phase source to the three-phase load. This converter has several attractive features that have been investigated in the last two decades. In the last few years, an increase in research work has been observed, bringing this topology closer to the industrial application. This paper presents the state-of-the-art view in the development of this converter, starting with a brief historical review. An important part of the paper is dedicated to a discussion of the most important modulation and control strategies developed recently. Special attention is given to present modern methods developed to solve the commutation problem. Some new arrays of power bidirectional switches integrated in a single module are also presented. Finally, this paper includes some practical issues related to the practical application of this technology, like overvoltage protection, use of filters and ride-through capability.

Matrix converters: a technology review

Solid-state switch-mode rectification converters have reached a matured level for improving power quality in terms of power-factor correction (PFC), reduced total harmonic distortion at input AC mains and precisely regulated DC output in buck, boost, buck-boost and multilevel modes with unidirectional and bidirectional power flow. This paper deals with a comprehensive review of improved power quality converters (IPQCs) configurations, control approaches, design features, selection of components, other related considerations, and their suitability and selection for specific applications. It is targeted to provide a wide spectrum on the status of IPQC technology to researchers, designers and application engineers working on switched-mode AC-DC converters. A classified list of more than 450 research publications on the state of art of IPQC is also given for a quick reference.

/pdf/a-review-of-single-phase-improved-power-quality-ac-dc-2pm6h4zjxq.pdf

A review of single-phase improved power quality AC-DC converters

This paper explores the fundamental limitations of the neutral-point voltage balancing problem for different loading conditions of three-level voltage source inverters. A new model in the DQ coordinate frame utilizing current switching functions is developed as a means to investigate theoretical limitations and to offer a more intuitive insight into the problem. The low-frequency ripple of the neutral point caused by certain loading conditions is reported and quantified.

A comprehensive study of neutral-point voltage balancing problem in three-level neutral-point-clamped voltage source PWM inverters

This paper presents the comparative evaluation of the performance of three state-of-the-art current control techniques for active filters. The linear rotating frame current controller, the fixed-frequency hysteresis controller, and the digital deadbeat controller are considered. The main control innovations, determined by industrial applications, are presented, suitable criteria for the comparison are identified, and the differences in the performance of the three controllers in a typical parallel active filter setup are investigated by simulations.

/pdf/comparison-of-current-control-techniques-for-active-filter-5flgsct2l0.pdf

Comparison of current control techniques for active filter applications

A recently proposed circuit P-Q transformation is used to analyze a three-phase controlled-current PWM rectifier. The DC operating point and AC transfer functions are completely determined. Most features of the power converter are clearly interpreted. They are: (1) the output voltage can be controlled from zero to maximum; (2) the system is equivalently an ideal current source in the steady state; (3) the system can be described as linear circuits; and (4) the input power factor can be arbitrarily controlled within a certain control range. >

A complete DC and AC analysis of three-phase controlled-current PWM rectifier using circuit D-Q transformation

A soft switching quasi-parallel resonant DC-link (QPRDCL) inverter with improved PWM capability has been recently presented. The circuit has the minimum voltage stress of the devices and provides the flexibility of selecting the on/off instants of the resonant link, resulting in improved PWM capability. In this paper, the operational principles and the detailed analysis of the QPRDCL inverter are presented for the resonant components design and the inverter control. An SVPWM with optimal vector sequence suitable for the QPRDCL inverter is also presented through the comparisons among five different modified space vector PWM (SVPWM) techniques classified by the voltage vector sequences. The performance of the selected optimal SVPWM is verified by the experimental results.

/pdf/soft-switching-space-vector-pwm-inverter-using-a-new-quasi-4xukegbots.pdf

Soft switching space vector PWM inverter using a new quasi-parallel resonant DC link

A soft-switched matrix converter is proposed using the zero voltage switching technique in some resonant pole inverters A high operating frequency with safe and efficient switching improves the dynamic and spectral performances and simplifies the protection logics and snubber networks Further, it can be implemented using simple analogue circuits, having similar transfer characteristics to those of the modern pulse width modulated matrix converters, such as maximum voltage transfer ratio and unity input displacement factor Analyses, design and simulation results are presented to verify the operating principle

Soft-switched matrix converter for high frequency direct AC-to-AC power conversion

An Integral Cycle Mode Control of Series Resonant Converter

Comparative studies between harmonic elimination and optimal PWM strategies are given for high power three-level inverter feeding an induction motor. An effective PWM map construction method based on the valid region on the frequency modulation index plane is suggested. Thereby, an optimal map including asynchronous space vector PWM, harmonic elimination and optimal PWM method is generated covering all of the low, middle and high modulation index regions. The PWM map was designed for 1 MVA rated general purpose GTO inverter and implemented with a digital signal processor. Experimental results are presented for 10 kVA prototype. >

G.H. Cho

Papers

A complete DC and AC analysis of three-phase controlled-current PWM rectifier using circuit D-Q transformation

Soft switching space vector PWM inverter using a new quasi-parallel resonant DC link

Soft-switched matrix converter for high frequency direct AC-to-AC power conversion

An Integral Cycle Mode Control of Series Resonant Converter

Optimal PWM design for high power three-level inverter through comparative studies