다중혈관 관상동맥 환자에서 y-문합을 이용하여 양쪽 내흉동맥만을 사용한 우회술의 조기 성적

To study the operational behaviour of λ-terms, we will use the denotational (mathematical) approach. A denotational semantics for a language is based on the choice of a space of semantics values, or denotations, where terms are to be interpreted. Choosing a space with nice mathematical properties can help in proving the semantic properties of terms, since to this aim standard mathematical techniques can be used.

λ Δ -Models

Public awareness of the need to reduce global warming and the significant increase in the prices of conventional energy sources have encouraged many countries to provide new energy policies that promote the renewable energy applications. Such renewable energy sources like wind, solar, hydro based energies, etc. are environment friendly and have potential to be more widely used. Combining these renewable energy sources with back-up units to form a hybrid system can provide a more economic, environment friendly and reliable supply of electricity in all load demand conditions compared to single-use of such systems. One of the most important issues in this type of hybrid system is to optimally size the hybrid system components as sufficient enough to meet all load requirements with possible minimum investment and operating costs. There are many studies about the optimization and sizing of hybrid renewable energy systems since the recent popular utilization of renewable energy sources. In this concept, this paper provides a detailed analysis of such optimum sizing approaches in the literature that can make significant contributions to wider renewable energy penetration by enhancing the system applicability in terms of economy.

Optimum design of hybrid renewable energy systems: Overview of different approaches

The demand for electricity is increasing day by day, which cannot be fulfilled by non-renewable energy sources alone. Renewable energy sources such as solar and wind are omnipresent and environmental friendly. The renewable emulnergy sources are emerging options to fulfill the energy demand, but unreliable due to the stochastic nature of their occurrence. Hybrid renewable energy system (HRES) combines two or more renewable energy sources like wind turbine and solar system. The objective of this paper is to present a comprehensive review of various aspects of HRES. This paper discusses prefeasibility analysis, optimum sizing, modeling, control aspects and reliability issues. The application of evolutionary technique and game theory in hybrid renewable energy is also presented in this paper.

Solar–wind hybrid renewable energy system: A review

Online fault diagnosis plays a crucial role in providing the required fault tolerance to drive systems used in safety-critical applications. Short-circuit faults are among the common faults occurring in electrical machines. This paper presents a review of existing techniques available for online stator interturn fault detection and diagnosis (FDD) in electrical machines. Special attention is given to short-circuit-fault diagnosis in permanent-magnet machines, which are fast replacing traditional machines in a wide variety of applications. Recent techniques that use signals analysis, models, or knowledge-based systems for FDD are reviewed in this paper. Motor current is the most commonly analyzed signal for fault diagnosis. Hence, motor current signature analysis is a topic of elaborate discussion in this paper. Additionally, parametric and finite-element models that were designed to simulate interturn-fault conditions are reviewed.

Recent Advances in Modeling and Online Detection of Stator Interturn Faults in Electrical Motors

Optimal sizing study of hybrid wind/PV/diesel power generation unit

A quasi-three-dimensional (3-D) analytical model of the magnetic field in an axial flux permanent-magnet synchronous machine is presented. This model is derived from an exact two-dimensional analytical solution of the magnetic field extended to the 3-D case by a simple and effective radial dependence modeling of the magnetic field. The obtained quasi-3-D solution allows rapid parametric studies of the air-gap magnetic field. Then, analytical modeling of the cogging torque is presented. It is based on the obtained quasi-3-D analytical solution. Results issued from the proposed model in the air gap are compared with those stemming from a 3-D finite-element method simulation as well as with prototype measured values.

Quasi-3-D analytical modeling of the magnetic field of an axial flux permanent-magnet synchronous machine

This paper presents a multi-slice analytical model for prediction of the open-circuit magnetic field in slotted semi-closed permanent-magnet axial flux synchronous machines. The technique is based on 2-D exact solution of the Maxwell's equations using the separation of variables method. The magnetic field expressions are developed in slots regions, slot opening regions, magnetic air gap regions, and permanent magnet regions leading to an exact calculation of the slot effects on the air gap magnetic field. The model is established considering that ferromagnetic parts are infinitely permeable, and end effects at inner and outer radii are neglected. The open circuit machine's global quantities (electromotive force and cogging torque) are then deduced from the local magnetic field expressions. Finally, the accuracy of the presented analytical model is validated by comparing its results to corresponding finite-element analyses for two different axial flux machines.

Analytical Modeling of the Open-Circuit Magnetic Field in Axial Flux Permanent-Magnet Machines With Semi-Closed Slots

Original article: Overview of analytical models of permanent magnet electrical machines for analysis and design purposes

This paper presents an analytical model for prediction of eddy current loss in armature windings of permanent magnet brushless AC machines. The developed model can either be used in the case of internal or external rotor radial-field machines topologies. First, a 2-D exact analytical solution of magnetic field distribution in an actual geometry of slotted surface mounted PM radial flux synchronous machines is established. It involves solution of Maxwell's equations in slots, airgap and PM's region. Then, magnetic vector potential solution in the slots is used for prediction of resistance limited eddy current in armature windings. Finally, results from this analytical model are compared to corresponding finite element analyses.

Georges Barakat

Papers

Optimal sizing study of hybrid wind/PV/diesel power generation unit

Quasi-3-D analytical modeling of the magnetic field of an axial flux permanent-magnet synchronous machine

Analytical Modeling of the Open-Circuit Magnetic Field in Axial Flux Permanent-Magnet Machines With Semi-Closed Slots

Original article: Overview of analytical models of permanent magnet electrical machines for analysis and design purposes

Analytical Prediction of Eddy-Current Loss in Armature Windings of Permanent Magnet Brushless AC Machines