The increase of the thrust/weight ratio of aircraft engines is extremely restricted by different 3-D flow loss mechanisms. One of them is the corner separation that can form at the junction between a blade suction side and a hub or shroud. In this paper, in order to further investigate the turbulent characteristics of corner separation, large-eddy simulation (LES) is conducted on a compressor cascade configuration using NACA65 blade profiles (chord based Reynolds number: 3.82 × 105), in comparison with the previous obtained experimental data. Using the shear-improved Smagorinsky model as subgrid-scale model, the LES gives a good description of the mean aerodynamics of the corner separation, especially for the blade surface static pressure coefficient and the total pressure losses. The turbulent dynamics is then analyzed in detail, in consideration of the turbulent structures, the one-point velocity spectra, and the turbulence anisotropy. Within the recirculation region, the energy appears to concentrate around the largest turbulent eddies, with fairly isotropic characteristics. Concerning the dynamics, an aperiodic shedding of hairpin vortices seems to induce an unsteadiness of the separation envelope.

/pdf/large-eddy-simulation-of-3-d-corner-separation-in-a-linear-45wu4vtb3q.pdf

Large-eddy simulation of 3-D corner separation in a linear compressor cascade

Turbulence characteristics in corner separation in a highly loaded linear compressor cascade

Investigation of Vortical Structures and Turbulence Characteristics in Corner Separation in a Linear Compressor Cascade Using DDES

Three-dimensional shock wave/turbulent-boundary-layer interaction of a hypersonic flow passing a single fin mounted on a flat plate at a Mach number of five and unit Reynolds number 3.7×10^7 was conducted by a large-eddy simulation approach. The performed large-eddy simulation has demonstrated good agreement with experimental data in terms of mean flowfield structures, surface pressure distribution, and surface flow pattern. Furthermore, the shock wave system, flow separation structure, and turbulence characteristics were all investigated by analyzing the obtained large-eddy simulation dataset. It was found that, for this kind of three-dimensional shock wave/turbulent-boundary-layer interaction problem, the flow characteristics in different regions have been dominated by respective wall turbulence, free shear layer turbulence, and corner vortex motions in different regions. In the reverse flow region, near-wall quasi-streamwise streaky structures were observed just beneath the main separation vortex, indicating that the transition of the pathway of the separation flow to turbulence may occur within a short distance from the reattachment location. The obtained large-eddy simulation results have provided a clear and direct evidence of the primary reverse flow and the secondary separation flow being essentially turbulent.

/pdf/investigation-of-three-dimensional-shock-wave-turbulent-7pionvpkip.pdf

Investigation of Three-Dimensional Shock Wave/Turbulent-Boundary-Layer Interaction Initiated by a Single Fin

Solidity effect on corner separation and its control in a high-speed low aspect ratio compressor cascade

Corner separation dynamics in a linear compressor cascade

The present study carried out a pure large eddy simulation (LES) on a NACA65 linear compressor cascade (chord-based Reynolds number: 382 000), at an incidence angle of 4°. In this configuration, a corner separation at the juncture of the blade suction side and the end-wall is clearly observed experimentally. For the simulation, 852 CPUs are used in parallel and particular attention is paid to the inflow conditions, coupling LES with the calculation of the inlet boundary layer and associated velocity fluctuations. The shear-improved Smagorinsky model, which has been proved to be competent for turbomachines, is used in this study. Numerical results are carefully compared with pressure measurements, two-dimensional and stereo particle image velocimetry. LES is found to be superior to Reynolds-averaged Navier–Stokes approach in predicting the three-dimensional separated flows in the compressor cascade since pressure coefficients and losses are in very good agreement with the experiment. LES has been proven to...

Unsteady behavior of corner separation in a compressor cascade: Large eddy simulation and experimental study

Corner Separation Dynamics in a Linear Compressor Cascade

The aim of this work is to present detailed unsteady pressure measurements of three-dimensional flow field in a NACA 65 linear compressor cascade. Chord-based Reynolds number of 382000 and incidence angle of 4 degrees were chosen as target configuration of the rig, which clearly presents the corner separation phenomenon at the juncture of the blade suction side and the end-wall. Concerning the experiments, a characterization of the mean and fluctuating component of wall static pressure on the surface of a specially developed blade is achieved at first. This fluctuating component is investigated utilizing nineteen high sensitivity condenser microphones plugged into blade cavities which have been carefully calibrated. Transfer functions obtained by calibration are exploited to reconstruct the time-dependent pressure signal and finally statistics, conditional ensemble averages, coherence and spectra analyses of fluctuations are presented in order to investigate the unsteady characteristics of the corner separation. High values of root mean square are individuated near the leading edge and in the separation region on the suction surface of the blade. Skewness and kurtosis show an intermittent behavior of the separation onset, which moves upstream and downstream on the suction surface. This intermittency of the separation line is probably linked with the existence of a bimodal behavior of the size of the corner separation. The analyses of coherence and conditional ensemble average between the signals at the leading edge and at the onset of the separation suggest a critical influence of angle and velocity of the incoming end-wall boundary layer on the positive pressure signatures of the shear layer, which characterize the inception of the separation.© 2015 ASME

Gherardo Zambonini

Papers

Large-eddy simulation of 3-D corner separation in a linear compressor cascade

Corner separation dynamics in a linear compressor cascade

Unsteady behavior of corner separation in a compressor cascade: Large eddy simulation and experimental study

Corner Separation Dynamics in a Linear Compressor Cascade

Unsteady Pressure Investigations of Corner Separated Flow in a Linear Compressor Cascade