Increasing demand for simplified and user-friendly adhesive systems has led to the development of a new class of adhesives termed as Universal Adhesives (UAs). The term "Universal" reflects manufacturers' claims that these adhesives can be applied with any adhesion strategy and offer the versatility of use with a variety of direct and indirect restorative materials. The aim of this review was to synthesize the literature regarding the current status of UAs, their adhesion potential to various substrates and their performance in different restorative situations. In vitro studies, clinical trials and systematic reviews were identified utilizing controlled vocabulary and keyword searches in Medline and EMBASE databases. About 282 studies (272 in vitro studies; 11 clinical studies) were included. Available laboratory and clinical evidence does not support the claim that UAs can be used with any adhesive strategy. Although, they can chemically bond to various tooth and direct/indirect restorative substrates, the stability of this bond is material-dependent and subject to hydrolytic degradation. Hence, additional measures are still needed to ensure long-term durability. which undermines the versatility of UAs. The lack of long-term data regarding the clinical performance of UAs further complicates clinical decision-making. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 2121-2131, 2019.

Universal dental adhesives: Current status, laboratory testing, and clinical performance

This study aimed to identify factors that can affect the retention of glass fiber posts to intra-radicular dentin based on in vitro studies that compared the bond strength (BS) of GFPs cemented with resin cements. Searches were carried out in PubMed and Scopus until December 2013. Bond strength values and variables as type of tooth, presence of endodontic treatment, pretreatment of the post, type of bonding agent (if present), type of cement and mode of cement application were extracted from the 34 included studies. A linear regression model was used to evaluate the influence of these parameters on BS. The presence of endodontic treatment decreased the BS values in 22.7% considering the pooled data (p = 0.013). For regular cement, cleaning the post increased BS when compared to silane application without cleaning (p = 0.032), considering cleaning as ethanol, air abrasion, or phosphoric acid application. Applying the cement around the post and into root canal decreased the resistance compared to only around the post (p = 0.02) or only into root canal (p = 0.041), on the other hand, no difference was found for self-adhesive resin cement for the same comparisons (p = 0.858 and p = 0.067). Endodontic treatment, method of cement application, and post pretreatment are factors that might significantly affect the retention of glass-fiber posts into root canals mainly when cemented with regular resin cement. Self-adhesive resin cements were found to be less technique-sensitive to luting procedures as compared with regular resin cements.

/pdf/a-systematic-review-of-factors-associated-with-the-retention-3jyqwz0x4k.pdf

A systematic review of factors associated with the retention of glass fiber posts

Does active application of universal adhesives to enamel in self-etch mode improve their performance?

Endocrown restorations: Influence of dental remnant and restorative material on stress distribution

Clinical Relevance RelyX U100 (commercially available outside Brazil as RelyX Unicem) was shown not to be affected by the operator's experience and therefore seems to be more suitable for use by less experienced clinicians.

Effect of Operator Experience on the Outcome of Fiber Post Cementation With Different Resin Cements

Purpose To evaluate the effect of the resin cement thickness (RCT) on bond strength (BS) and gap formation (GF) of fiber posts bonded to root dentin. Materials and methods The roots of 24 extracted human mandibular premolars were treated endodontically and the post spaces were prepared using drills with different diameters according to the following groups (n = 8): well adapted (WA), moderately well adapted (MA) and poorly adapted (PA). The fiber glass posts were cemented (Excite DSC and Variolink II) in accordance with the manufacturer's instructions. After 1 week, the roots were transversely sectioned into six 1-mm-thick disks and photographed using an optical microscope to determine the RCT. After this, epoxy resin replicas of each sample were observed using SEM, and the mean length and width of the gaps formed in the cement/dentin/post interface were measured. Finally, each sample was subjected to the push-out test (0.5 mm/min), and the data were statistically analyzed using one-way ANOVA and Tukey's tests at the 5% level of significance. Results The lowest RCT (μm) was observed for WA and the highest for PA. The group MA showed an intermediate value. Significantly higher push-out BS values were observed for WA compared to the other groups. The MA and PA groups were statistically similar. The highest mean gap length (%) and width (μm) were observed for PA. The groups MA and WA were statistically similar. Conclusion Lower resin cement thickness resulted in better fiber post adhesion, that is, in higher bond strength and less gap formation.

Influence of the resin cement thickness on bond strength and gap formation of fiber posts bonded to root dentin.

This study evaluated the influence of the cementation system on the regional push-out bond strength and failure pattern of fiber posts to radicular dentin. The roots of 48 extracted human incisors were prepared and divided into 3 groups (n = 16), according to the cementation system: AdperScotchbond Multi-Purpose + resin cement RelyX ARC (SBMP+ARC); Adper SingleBond 2 + RelyX ARC (SB+ARC) and; RelyX U100 self-adhesive resin cement (U100). The posts were cemented as per manufacturer's instructions for each cementation system. After 1 week, the roots were sectioned transversely into 6 discs. Two discs were obtained from the cervical, middle and apical thirds and the push-out test was carried out. The failure pattern was examined on all debonded specimens. The data were analyzed by two-way repeated measures ANOVA and Tukey's test. When U100 was used, no statistically significant difference (p>0.05) was observed among the different root regions. Statistically higher push-out bond strength values were detected in the cervical third for SBMP+ARC and SB+ARC (p<0.05). The U100 showed significantly more mixed failures than SBMP+ARC in the apical third (p<0.05). In conclusion, the self-adhesive cement RelyX U100 was the only cement not sensitive to the root canal region.

/pdf/regional-bond-strengths-to-root-canal-dentin-of-fiber-posts-44k908qqci.pdf

Regional bond strengths to root canal dentin of fiber posts luted with three cementation systems

Purpose To evaluate the fracture resistance (FR) and bond strength (BS) after mechanical fatigue (MF) of flared root canals restored with different restorative techniques for fiber post cementation. Materials and methods The root canals of 84 single-rooted premolars were endodontically treated and prepared in order to simulate an oversized root canal, except for the positive control group (PC), in which a prefabricated fiber post (PFP) with a diameter compatible with the post cavity was cemented. In the oversized root canals, alternative restorative techniques for post cementation were tested, as follows: NC: negative control (PFP with a diameter smaller than that of the root canal); AP: PFP + accessory posts; RR: root reinforcement with composite resin; DAP: direct anatomical post; IAP: indirect anatomical post. After the luting procedures using Excite DSC and Variolink II, indirect composite crowns were cemented on composite resin cores and the specimens were mechanically fatigued (1.2 x 106 cycles, 40 N). From each group, 8 specimens were subjected to the push-out BS test and the others 6 specimens to the FR test. For both tests, the data were subjected to ANOVA and Scheffe's tests (α = 0.05). Results In terms of FR, all alternative techniques showed intermediate performance, being similar to both control groups. In terms of BS, only the groups DAP and IAP were similar to the well-adapted condition (positive control group). Conclusion The use of DAP and IAP should be the first choice for fiber post cementation in oversized root canals.

Evaluation of different restorative techniques for filling flared root canals: fracture resistance and bond strength after mechanical fatigue.

Statement of problem The behavior and magnitude of the deformations that occur during polymerization and the behavior of the luting agents of glass fiber posts inside the root canal require quantification. Purpose The purpose of this in vitro study was to investigate the in situ polymerization shrinkage, degree of conversion, and bond strength inside the root canal of resin cements used to lute fiber posts. Material and methods Thirty maxillary canines were prepared to lute fiber posts. The teeth were randomly divided into 2 groups (n=15) according to the cementation system used, which included ARC, the conventional dual-polymerized resin cement RelyX ARC, and the U200 system, a self-adhesive resin cement, RelyX U200. Two fiber optic sensors with recorded Bragg gratings (FBG) were attached to each post before inserting the resin cement inside the root canal to measure the polymerization shrinkage (PS) of the cements in the cervical and apical root regions (μe). Specimens were sectioned (into cervical and apical regions) to evaluate bond strength (BS) with a push-out test and degree of conversion (DC) with micro-Raman spectroscopy. Data were statistically analyzed with 2-way ANOVA and the Tukey honestly significant difference post hoc test (α=.05). Results The ARC and U200 system showed similar PS values (-276.4 ±129.2 μe and -252.1 ±119.2 μe, respectively). DC values from ARC were higher (87.5 ±2.7%) than those of U200 (55.9 ±9.7%). The cervical region showed higher DC values (74.8 ±15.2%) and PS values (-381.6 ±53.0 μe) than those of the apical region (68.5 ±20.1% and -146.9 ±43.5 μe, respectively) for both of the resin cements. BS was only statistically different between the cervical and apical regions for ARC ( P Conclusions The ARC system showed the highest PS and DC values compared with U200; and for both of the resin cements, the PS and DC values were higher at the cervical region than at the apical region of the canal root. BS was higher in the cervical region only for ARC.

Giovana Mongruel Gomes

Papers

Influence of the resin cement thickness on bond strength and gap formation of fiber posts bonded to root dentin.

Effect of Operator Experience on the Outcome of Fiber Post Cementation With Different Resin Cements

Regional bond strengths to root canal dentin of fiber posts luted with three cementation systems

Evaluation of different restorative techniques for filling flared root canals: fracture resistance and bond strength after mechanical fatigue.

An in situ evaluation of the polymerization shrinkage, degree of conversion, and bond strength of resin cements used for luting fiber posts.